[Sun Nov 27 02:20:15 2011] Detection parameters:
  Position = (255.9, 429.0) = 0 49 30.48 -73 31 7.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 157.2 +/- 15.6
  Background counts = 7.5
  Rate = 0.008 +/- 0.0008

[Sun Nov 27 02:20:15 2011] Off-axis axis estimate = 9.95'
[Sun Nov 27 03:11:19 2011] Using EEF radius (= 11.40 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 03:11:19 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Nov 27 03:11:19 2011] Initial guess for spatial extent in simple fitting = 11.40"
[Sun Nov 27 03:11:19 2011] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.923
[Sun Nov 27 03:11:19 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 11.40"
[Sun Nov 27 03:41:55 2011] fullrun_mos1_xmm0503000201_pi300-10000_cl_pass0_src3.ximg exists
[Sun Nov 27 03:41:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503000201_pi300-10000_cl_pass0_src3.csv
[Sun Nov 27 03:41:55 2011] fullrun_mos1_xmm0503000201_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Nov 27 03:41:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503000201_pi300-10000_cl_pass0_src3.csv
[Sun Nov 27 03:41:55 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503000201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503000201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 03:41:55 2011] fullrun_mos1_xmm0503000201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Nov 27 03:41:55 2011] fullrun_mos1_xmm0503000201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Nov 27 03:41:55 2011] Fit fullrun_mos1_xmm0503000201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Nov 27 04:12:38 2011] Spatial fit model total counts = 226.472000, observed total counts = 226.000000
[Sun Nov 27 04:12:38 2011] Offset between fit and detection position for source 13 = 0.041706 pixels
[Sun Nov 27 04:12:38 2011] 227.219000 total counts/ 124.295000 bgd. counts: snr = 9.231873
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.041706 pixels
  Position = (255.9, 428.9) = 0 49 30.48 -73 31 9.0
  Extent = 5.6 (4.5-7.2)", rotation angle = 0
  Source counts = 102.9 +/- 15.1
  Background counts = 124.3
  Rate = 0.005 +/- 0.0007
[Sun Nov 27 04:12:38 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 04:12:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 04:12:38 2011] Assessing source extent using major axis lower bound
[Sun Nov 27 04:12:38 2011] Source does appear to be extended
[Sun Nov 27 04:12:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 05:01:37 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Nov 27 05:01:37 2011] Initial guess for spatial extent in simple fitting = 5.64"
[Sun Nov 27 05:01:37 2011] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.239
[Sun Nov 27 05:01:37 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 5.64"
[Sun Nov 27 05:29:49 2011] fullrun_mos1_xmm0503000201_pi300-10000_cl_pass1_src3.ximg exists
[Sun Nov 27 05:29:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503000201_pi300-10000_cl_pass1_src3.csv
[Sun Nov 27 05:29:49 2011] fullrun_mos1_xmm0503000201_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Nov 27 05:29:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503000201_pi300-10000_cl_pass1_src3.csv
[Sun Nov 27 05:29:49 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503000201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503000201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 05:29:49 2011] fullrun_mos1_xmm0503000201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Nov 27 05:29:49 2011] fullrun_mos1_xmm0503000201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Nov 27 05:29:49 2011] Fit fullrun_mos1_xmm0503000201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Nov 27 05:56:32 2011] Spatial fit model total counts = 229.123000, observed total counts = 226.000000
[Sun Nov 27 05:56:32 2011] Offset between fit and detection position for source 13 = 0.005612 pixels
[Sun Nov 27 05:56:32 2011] 229.900000 total counts/ 123.074000 bgd. counts: snr = 9.629280
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.005612 pixels
  Position = (255.9, 428.9) = 0 49 30.48 -73 31 9.0
  Extent = 5.8 (4.5-7.3)", rotation angle = 0
  Source counts = 106.8 +/- 15.2
  Background counts = 123.1
  Rate = 0.005 +/- 0.0008
[Sun Nov 27 05:56:32 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 05:56:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 05:56:32 2011] Assessing source extent using major axis lower bound
[Sun Nov 27 05:56:32 2011] Source does appear to be extended
[Sun Nov 27 05:56:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 06:35:05 2011] XMMSAS src. selection expression = ellipse(22214.236160, 37266.311400, 345.012010, 345.012010, 0.000000, X, Y)
[Sun Nov 27 06:35:05 2011] Writing source region out to fullrun_mos1_xmm0503000201_pi300-10000_pass1_cl_src13_src.reg
[Sun Nov 27 06:35:05 2011] Extracting stamp from image fullrun_mos1_xmm0503000201_pi300-10000_cl_sm2.00.img.gz, (236, 409) - (276, 449)
[Sun Nov 27 06:35:05 2011] XMMSAS bgd. selection expression = annulus(22214.236160, 37266.311400, 575.020017, 1150.040033, X, Y)
[Sun Nov 27 06:35:05 2011] Writing fullrun_mos1_xmm0503000201_pi300-10000_pass1_cl_src13.gif
[Sun Nov 27 06:35:58 2011] Mean detx,y = (-1031.77, -13296.93) 
[Sun Nov 27 06:36:00 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Nov 27 06:36:11 2011] Binned source spectrum to 10 counts/bin
[Sun Nov 27 06:36:12 2011] Setting source spectrum file to fullrun_mos1_xmm0503000201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sun Nov 27 06:36:12 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0503000201_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sun Nov 27 07:11:23 2011] Updating aperture counts using extracted products
[Sun Nov 27 07:11:23 2011] Error reading totcts from fullrun_mos1_xmm0503000201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sun Nov 27 07:11:24 2011] Calculating source flux in energy range 0.30-8.00
[Sun Nov 27 07:11:24 2011] Using photon index=1.80, rate=0.00528, arf fullrun_mos1_xmm0503000201_pi300-10000_pass1_cl_src13.arf
[Sun Nov 27 07:11:24 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Nov 27 07:11:24 2011] Updating source flux to 1.7e-13