[Thu Jun 20 05:18:41 2013] Detection parameters:
  Position = (222.4, 137.9) = 18 31 44.59 -32 31 9.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 216.2 +/- 24.2
  Background counts = 123.0
  Rate = 0.003 +/- 0.0004

[Thu Jun 20 05:18:42 2013] Off-axis axis estimate = 12.88'
[Thu Jun 20 05:19:24 2013] Using EEF radius (= 12.87 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 05:19:24 2013] Initial guess for spatial extent in simple fitting = 12.87"
[Thu Jun 20 05:19:24 2013] source mask rpix=3.0, npix_max = 47, mask sum = 49, frac = 1.025
[Thu Jun 20 05:19:24 2013] Giving source the simple spatial ID 50 for pass 0, mean size = 12.87"
[Thu Jun 20 05:19:26 2013] fullrun_pn_xmm0502970101_pi300-10000_cl_pass0_src50.ximg exists
[Thu Jun 20 05:19:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502970101_pi300-10000_cl_pass0_src50.csv
[Thu Jun 20 05:19:26 2013] fullrun_pn_xmm0502970101_pi300-10000_cl_pass0_src50_1.ximg exists
[Thu Jun 20 05:19:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502970101_pi300-10000_cl_pass0_src50.csv
[Thu Jun 20 05:19:26 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502970101_pi300-10000_cl_pass0_src50_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502970101_pi300-10000_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 05:19:27 2013] fullrun_pn_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src50.ximg exists
[Thu Jun 20 05:19:27 2013] fullrun_pn_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists
[Thu Jun 20 05:19:27 2013] Fit fullrun_pn_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src50 appears to have run properly
[Thu Jun 20 05:19:46 2013] Warning: source 50 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 55 at 13.415970 pixels away
[Thu Jun 20 05:19:46 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 05:19:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 05:19:46 2013] Assessing source extent using major
[Thu Jun 20 05:19:46 2013] Source does appear to be extended
[Thu Jun 20 05:19:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 05:20:24 2013] Using EEF radius (= 12.87 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 05:20:24 2013] Initial guess for spatial extent in simple fitting = 12.87"
[Thu Jun 20 05:20:24 2013] source mask rpix=3.0, npix_max = 47, mask sum = 49, frac = 1.025
[Thu Jun 20 05:20:24 2013] Giving source the simple spatial ID 49 for pass 1, mean size = 12.87"
[Thu Jun 20 05:20:25 2013] fullrun_pn_xmm0502970101_pi300-10000_cl_pass1_src49.ximg exists
[Thu Jun 20 05:20:25 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502970101_pi300-10000_cl_pass1_src49.csv
[Thu Jun 20 05:20:25 2013] fullrun_pn_xmm0502970101_pi300-10000_cl_pass1_src49_1.ximg exists
[Thu Jun 20 05:20:25 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502970101_pi300-10000_cl_pass1_src49.csv
[Thu Jun 20 05:20:25 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502970101_pi300-10000_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502970101_pi300-10000_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 05:20:26 2013] fullrun_pn_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src49.ximg exists
[Thu Jun 20 05:20:26 2013] fullrun_pn_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists
[Thu Jun 20 05:20:26 2013] Fit fullrun_pn_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src49 appears to have run properly
[Thu Jun 20 05:20:45 2013] Spatial fit model total counts = 2530.820000, observed total counts = 2528.000000
[Thu Jun 20 05:20:45 2013] Offset between fit and detection position for source 55 = 0.072754 pixels
[Thu Jun 20 05:20:45 2013] 2539.764000 total counts/ 2398.070000 bgd. counts: snr = 2.893480
Spatial fit parameters:
  Offset between fit and detection position for source 55 = 0.072754 pixels
  Position = (222.5, 137.9) = 18 31 44.57 -32 31 9.4
  Extent = 5.7 (4.3-7.1)", rotation angle = 0
  Source counts = 141.7 +/- 50.4
  Background counts = 2398.1
  Rate = 0.002 +/- 0.0009
[Thu Jun 20 05:20:45 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 05:20:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 05:20:45 2013] Assessing source extent using major axis lower bound
[Thu Jun 20 05:20:45 2013] Source does appear to be extended
[Thu Jun 20 05:20:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 05:21:19 2013] XMMSAS src. selection expression = ellipse(19309.876200, 11953.025000, 342.133810, 342.133810, 0.000000, X, Y)
[Thu Jun 20 05:21:19 2013] Not overwriting source region fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src55_src.reg
[Thu Jun 20 05:21:19 2013] Extracting stamp from image fullrun_pn_xmm0502970101_pi300-10000_cl_sm2.00.img.gz, (203, 118) - (242, 158)
[Thu Jun 20 05:21:19 2013] XMMSAS bgd. selection expression = annulus(19309.876200, 11953.025000, 570.223016, 1140.446033, X, Y)
[Thu Jun 20 05:21:19 2013] Writing fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src55.gif
[Thu Jun 20 05:21:32 2013] ../../xmm0502970101/products/events/fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src55_src.evt and ../../xmm0502970101/products/events/fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src55_bgd.evt exist, delete to re-create
[Thu Jun 20 05:21:33 2013] Mean detx,y = (5587.22, -12471.73) 
[Thu Jun 20 05:21:33 2013] ../../xmm0502970101/products/images/fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src55_src.img and ../../xmm0502970101/products/images/fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src55_bgd.img exist, delete to re-create
[Thu Jun 20 05:21:33 2013] ../../xmm0502970101/products/spectra/fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src55_src_b10.pi.gz and ../../xmm0502970101/products/spectra/fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src55_bgd.pi exist, delete to re-create
[Thu Jun 20 05:21:33 2013] Setting source spectrum file to fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Thu Jun 20 05:21:33 2013] Setting bgd. spectrum file to fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src55_bgd.pi.gz
[Thu Jun 20 05:21:33 2013] ../../xmm0502970101/products/lightcurves/fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src55_src.lc and ../../xmm0502970101/products/lightcurves/fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src55_bgd.lc exist, delete to re-create
[Thu Jun 20 05:21:44 2013] fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src55.rmf exists, delete to re-create
[Thu Jun 20 05:21:44 2013] fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src55.arf exists, delete to re-create
[Thu Jun 20 06:10:11 2013] Updating aperture counts using extracted products
[Thu Jun 20 06:10:11 2013] Total counts from fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src55_src_b10.pi.gz = 350.00
[Thu Jun 20 06:10:11 2013] Total counts from fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src55_bgd.pi.gz = 1638.00
[Thu Jun 20 06:10:11 2013] Got source and background scale factors 316244.000000, 2941549.000000
[Thu Jun 20 06:10:11 2013] User source parameters:
  Position = (222.5, 137.9) = 18 31 44.57 -32 31 9.4
  Extent = 5.7 (4.3-7.1)", rotation angle = 0
  Source aperture counts = 173.9 +/- 19.7
  Background aperture counts = 176.1
  Rate = 0.003 +/- 0.0003

[Thu Jun 20 06:10:15 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 20 06:10:15 2013] Using photon index=1.80, rate=0.00247, arf fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src55.arf
[Thu Jun 20 06:10:15 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 20 06:10:15 2013] Updating source flux to 5.8e-14
[Thu Jun 20 06:11:15 2013] xmm0502970101/analysis//spectral/fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src55_pl.csv not found, spectral fit skipped or did not complete