[Thu Jun 20 05:18:39 2013] Detection parameters:
  Position = (178.5, 259.2) = 18 31 59.63 -32 22 19.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 116.7 +/- 20.2
  Background counts = 149.9
  Rate = 0.003 +/- 0.0005

[Thu Jun 20 05:18:42 2013] Off-axis axis estimate = 9.15'
[Thu Jun 20 05:19:24 2013] Using EEF radius (= 11.00 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 05:19:24 2013] Initial guess for spatial extent in simple fitting = 11.00"
[Thu Jun 20 05:19:24 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.981
[Thu Jun 20 05:19:24 2013] Giving source the simple spatial ID 29 for pass 0, mean size = 11.00"
[Thu Jun 20 05:19:26 2013] fullrun_pn_xmm0502970101_pi300-10000_cl_pass0_src29.ximg exists
[Thu Jun 20 05:19:26 2013] fullrun_pn_xmm0502970101_pi300-10000_cl_pass0_src29_1.ximg exists
[Thu Jun 20 05:19:26 2013] Fit fullrun_pn_xmm0502970101_pi300-10000_cl_pass0_src29 appears to have run properly
[Thu Jun 20 05:19:27 2013] fullrun_pn_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Thu Jun 20 05:19:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src29.csv
[Thu Jun 20 05:19:27 2013] fullrun_pn_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Thu Jun 20 05:19:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src29.csv
[Thu Jun 20 05:19:27 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 05:19:46 2013] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 33 at 13.843422 pixels away
[Thu Jun 20 05:19:46 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 05:19:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 05:19:46 2013] Assessing source extent using major
[Thu Jun 20 05:19:46 2013] Source does appear to be extended
[Thu Jun 20 05:19:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 05:20:24 2013] Using EEF radius (= 11.00 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 05:20:24 2013] Initial guess for spatial extent in simple fitting = 11.00"
[Thu Jun 20 05:20:24 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.981
[Thu Jun 20 05:20:24 2013] Giving source the simple spatial ID 28 for pass 1, mean size = 11.00"
[Thu Jun 20 05:20:25 2013] fullrun_pn_xmm0502970101_pi300-10000_cl_pass1_src28.ximg exists
[Thu Jun 20 05:20:25 2013] fullrun_pn_xmm0502970101_pi300-10000_cl_pass1_src28_1.ximg exists
[Thu Jun 20 05:20:25 2013] Fit fullrun_pn_xmm0502970101_pi300-10000_cl_pass1_src28 appears to have run properly
[Thu Jun 20 05:20:26 2013] fullrun_pn_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Thu Jun 20 05:20:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src28.csv
[Thu Jun 20 05:20:26 2013] fullrun_pn_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Thu Jun 20 05:20:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src28.csv
[Thu Jun 20 05:20:26 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 05:20:45 2013] Source 33 is offset by 6.766608 and 2.634579 pixels which is larger than
2 X fitted extent = 2.145733 x 1.264556, not incorporating fit results
[Thu Jun 20 05:20:45 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 05:20:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 05:20:45 2013] Assessing source extent using major
[Thu Jun 20 05:20:45 2013] Source does appear to be extended
[Thu Jun 20 05:20:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 05:21:19 2013] XMMSAS src. selection expression = ellipse(15483.694855, 22504.484406, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 20 05:21:19 2013] Not overwriting source region fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src33_src.reg
[Thu Jun 20 05:21:19 2013] Extracting stamp from image fullrun_pn_xmm0502970101_pi300-10000_cl_sm2.00.img.gz, (141, 222) - (216, 297)
[Thu Jun 20 05:21:19 2013] XMMSAS bgd. selection expression = annulus(15483.694855, 22504.484406, 1087.500000, 2175.000000, X, Y) && !ellipse(12583.470947, 23891.938995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15617.671616, 25205.992645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13100.034775, 24731.257477, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 20 05:21:19 2013] Writing fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src33.gif
[Thu Jun 20 05:21:27 2013] ../../xmm0502970101/products/events/fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src33_src.evt and ../../xmm0502970101/products/events/fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src33_bgd.evt exist, delete to re-create
[Thu Jun 20 05:21:28 2013] Mean detx,y = (9393.97, -1915.94) 
[Thu Jun 20 05:21:28 2013] ../../xmm0502970101/products/images/fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src33_src.img and ../../xmm0502970101/products/images/fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src33_bgd.img exist, delete to re-create
[Thu Jun 20 05:21:28 2013] ../../xmm0502970101/products/spectra/fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src33_src_b10.pi.gz and ../../xmm0502970101/products/spectra/fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src33_bgd.pi exist, delete to re-create
[Thu Jun 20 05:21:28 2013] Setting source spectrum file to fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Thu Jun 20 05:21:28 2013] Setting bgd. spectrum file to fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Thu Jun 20 05:21:28 2013] ../../xmm0502970101/products/lightcurves/fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src33_src.lc and ../../xmm0502970101/products/lightcurves/fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src33_bgd.lc exist, delete to re-create
[Thu Jun 20 05:21:44 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 20 05:21:44 2013] rmf not generated due to insufficient counts
[Thu Jun 20 05:21:44 2013] fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src33.arf exists, delete to re-create
[Thu Jun 20 06:10:04 2013] Updating aperture counts using extracted products
[Thu Jun 20 06:10:04 2013] Total counts from fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src33_src_b10.pi.gz = 1038.00
[Thu Jun 20 06:10:04 2013] Total counts from fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src33_bgd.pi.gz = 6231.00
[Thu Jun 20 06:10:04 2013] Got source and background scale factors 1329600.000000, 9704251.000000
[Thu Jun 20 06:10:04 2013] User source parameters:
  Position = (178.5, 259.2) = 18 31 59.63 -32 22 19.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 184.3 +/- 33.2
  Background aperture counts = 853.7
  Rate = 0.003 +/- 0.0006

[Thu Jun 20 06:10:04 2013] Updating counts from extracted products
[Thu Jun 20 06:10:04 2013] Set source signif. to 184.28/29.22 = 6.31
[Thu Jun 20 06:10:14 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 20 06:10:14 2013] Using photon index=1.80, rate=0.00321, arf fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src33.arf
[Thu Jun 20 06:10:14 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 20 06:10:14 2013] Updating source flux to 1.6e-14
[Thu Jun 20 06:11:05 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 20 06:11:15 2013] xmm0502970101/analysis//spectral/fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src33_pl.csv not found, spectral fit skipped or did not complete