[Thu Jun 20 05:18:38 2013] Detection parameters:
  Position = (235.9, 297.0) = 18 31 39.93 -32 19 37.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 751.1 +/- 41.0
  Background counts = 158.0
  Rate = 0.01 +/- 0.0008

[Thu Jun 20 05:18:42 2013] Off-axis axis estimate = 4.54'
[Thu Jun 20 05:19:24 2013] Using EEF radius (= 8.70 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 05:19:24 2013] Initial guess for spatial extent in simple fitting = 8.70"
[Thu Jun 20 05:19:24 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.000
[Thu Jun 20 05:19:24 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 8.70"
[Thu Jun 20 05:19:26 2013] fullrun_pn_xmm0502970101_pi300-10000_cl_pass0_src21.ximg exists
[Thu Jun 20 05:19:26 2013] fullrun_pn_xmm0502970101_pi300-10000_cl_pass0_src21_1.ximg exists
[Thu Jun 20 05:19:26 2013] Fit fullrun_pn_xmm0502970101_pi300-10000_cl_pass0_src21 appears to have run properly
[Thu Jun 20 05:19:26 2013] fullrun_pn_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Thu Jun 20 05:19:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src21.csv
[Thu Jun 20 05:19:26 2013] fullrun_pn_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Thu Jun 20 05:19:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src21.csv
[Thu Jun 20 05:19:26 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 05:19:46 2013] Source 24 is offset by -6.653852 and 3.684796 pixels which is larger than
2 X fitted extent = 0.939835 x 0.939835, not incorporating fit results
[Thu Jun 20 05:19:46 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 05:19:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 05:19:46 2013] Assessing source extent using major
[Thu Jun 20 05:19:46 2013] Source does appear to be extended
[Thu Jun 20 05:19:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 05:20:24 2013] Using EEF radius (= 8.70 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 05:20:24 2013] Initial guess for spatial extent in simple fitting = 8.70"
[Thu Jun 20 05:20:24 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.000
[Thu Jun 20 05:20:24 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 8.70"
[Thu Jun 20 05:20:25 2013] fullrun_pn_xmm0502970101_pi300-10000_cl_pass1_src20.ximg exists
[Thu Jun 20 05:20:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502970101_pi300-10000_cl_pass1_src20.csv
[Thu Jun 20 05:20:25 2013] fullrun_pn_xmm0502970101_pi300-10000_cl_pass1_src20_1.ximg exists
[Thu Jun 20 05:20:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502970101_pi300-10000_cl_pass1_src20.csv
[Thu Jun 20 05:20:25 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502970101_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502970101_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 05:20:26 2013] fullrun_pn_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Thu Jun 20 05:20:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Thu Jun 20 05:20:26 2013] fullrun_pn_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Thu Jun 20 05:20:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Thu Jun 20 05:20:26 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 05:20:45 2013] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 24 at 10.734477 pixels away
[Thu Jun 20 05:20:45 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 05:20:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 05:20:45 2013] Assessing source extent using major
[Thu Jun 20 05:20:45 2013] Source does appear to be extended
[Thu Jun 20 05:20:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 05:21:18 2013] XMMSAS src. selection expression = ellipse(20471.740875, 25788.381287, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 20 05:21:18 2013] Not overwriting source region fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src24_src.reg
[Thu Jun 20 05:21:18 2013] Extracting stamp from image fullrun_pn_xmm0502970101_pi300-10000_cl_sm2.00.img.gz, (198, 259) - (273, 334)
[Thu Jun 20 05:21:18 2013] XMMSAS bgd. selection expression = annulus(20471.740875, 25788.381287, 1087.500000, 2175.000000, X, Y) && !ellipse(18149.280060, 24329.763200, 421.810412, 421.810412, 0.000000, X, Y)
[Thu Jun 20 05:21:18 2013] Writing fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src24.gif
[Thu Jun 20 05:21:25 2013] ../../xmm0502970101/products/events/fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src24_src.evt and ../../xmm0502970101/products/events/fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src24_bgd.evt exist, delete to re-create
[Thu Jun 20 05:21:25 2013] Mean detx,y = (4325.22, 1353.82) 
[Thu Jun 20 05:21:25 2013] ../../xmm0502970101/products/images/fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src24_src.img and ../../xmm0502970101/products/images/fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src24_bgd.img exist, delete to re-create
[Thu Jun 20 05:21:25 2013] ../../xmm0502970101/products/spectra/fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src24_src_b10.pi.gz and ../../xmm0502970101/products/spectra/fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src24_bgd.pi exist, delete to re-create
[Thu Jun 20 05:21:25 2013] Setting source spectrum file to fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Thu Jun 20 05:21:25 2013] Setting bgd. spectrum file to fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Thu Jun 20 05:21:25 2013] ../../xmm0502970101/products/lightcurves/fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src24_src.lc and ../../xmm0502970101/products/lightcurves/fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src24_bgd.lc exist, delete to re-create
[Thu Jun 20 05:21:44 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 20 05:21:44 2013] rmf not generated due to insufficient counts
[Thu Jun 20 05:21:44 2013] fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src24.arf exists, delete to re-create
[Thu Jun 20 06:10:00 2013] Updating aperture counts using extracted products
[Thu Jun 20 06:10:00 2013] Total counts from fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src24_src_b10.pi.gz = 1700.00
[Thu Jun 20 06:10:00 2013] Total counts from fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src24_bgd.pi.gz = 6605.00
[Thu Jun 20 06:10:00 2013] Got source and background scale factors 1170792.000000, 9224326.000000
[Thu Jun 20 06:10:00 2013] User source parameters:
  Position = (235.9, 297.0) = 18 31 39.93 -32 19 37.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 861.7 +/- 42.2
  Background aperture counts = 838.3
  Rate = 0.02 +/- 0.0007

[Thu Jun 20 06:10:00 2013] Updating counts from extracted products
[Thu Jun 20 06:10:00 2013] Set source signif. to 861.66/28.95 = 29.76
[Thu Jun 20 06:10:13 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 20 06:10:13 2013] Using photon index=1.80, rate=0.015, arf fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src24.arf
[Thu Jun 20 06:10:13 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 20 06:10:13 2013] Updating source flux to 5.7e-14
[Thu Jun 20 06:11:05 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 20 06:11:15 2013] xmm0502970101/analysis//spectral/fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src24_pl.csv not found, spectral fit skipped or did not complete