[Thu Jun 20 05:18:36 2013] Detection parameters:
  Position = (335.9, 392.1) = 18 31 5.60 -32 12 42.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1934.4 +/- 54.3
  Background counts = 127.7
  Rate = 0.03 +/- 0.0008

[Thu Jun 20 05:18:42 2013] Off-axis axis estimate = 7.32'
[Thu Jun 20 05:19:24 2013] Using EEF radius (= 10.09 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 05:19:24 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 20 05:19:24 2013] Initial guess for spatial extent in simple fitting = 10.09"
[Thu Jun 20 05:19:24 2013] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.133
[Thu Jun 20 05:19:24 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 10.09"
[Thu Jun 20 05:19:25 2013] fullrun_pn_xmm0502970101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jun 20 05:19:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502970101_pi300-10000_cl_pass0_src1.csv
[Thu Jun 20 05:19:25 2013] fullrun_pn_xmm0502970101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jun 20 05:19:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502970101_pi300-10000_cl_pass0_src1.csv
[Thu Jun 20 05:19:25 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502970101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502970101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 05:19:26 2013] fullrun_pn_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jun 20 05:19:26 2013] fullrun_pn_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jun 20 05:19:26 2013] Fit fullrun_pn_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jun 20 05:19:46 2013] Spatial fit model total counts = 3474.730000, observed total counts = 3173.000000
[Thu Jun 20 05:19:46 2013] Offset between fit and detection position for source 1 = 0.233362 pixels
[Thu Jun 20 05:19:46 2013] 3464.910000 total counts/ 2058.220000 bgd. counts: snr = 31.006483
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.233362 pixels
  Position = (335.7, 392.2) = 18 31 5.68 -32 12 43.4
  Extent = 6.1 (5.7-6.4)", rotation angle = 0
  Source counts = 1406.7 +/- 58.9
  Background counts = 2058.2
  Rate = 0.02 +/- 0.001
[Thu Jun 20 05:19:46 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 05:19:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 05:19:46 2013] Assessing source extent using major axis lower bound
[Thu Jun 20 05:19:46 2013] Source does appear to be extended
[Thu Jun 20 05:19:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 05:20:24 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 20 05:20:24 2013] Initial guess for spatial extent in simple fitting = 6.08"
[Thu Jun 20 05:20:24 2013] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.110
[Thu Jun 20 05:20:24 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 6.08"
[Thu Jun 20 05:20:25 2013] fullrun_pn_xmm0502970101_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jun 20 05:20:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502970101_pi300-10000_cl_pass1_src1.csv
[Thu Jun 20 05:20:25 2013] fullrun_pn_xmm0502970101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jun 20 05:20:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502970101_pi300-10000_cl_pass1_src1.csv
[Thu Jun 20 05:20:25 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502970101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502970101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 05:20:26 2013] fullrun_pn_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jun 20 05:20:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Thu Jun 20 05:20:26 2013] fullrun_pn_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jun 20 05:20:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Thu Jun 20 05:20:26 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 05:20:45 2013] Warning, spatial fit 1 centroid is now closest to src. 11
[Thu Jun 20 05:20:45 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 05:20:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 05:20:45 2013] Assessing source extent using major axis lower bound
[Thu Jun 20 05:20:45 2013] Source does appear to be extended
[Thu Jun 20 05:20:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 05:21:18 2013] Counts = 1406.690000, rescaling region sizes by 2.000000
[Thu Jun 20 05:21:18 2013] XMMSAS src. selection expression = ellipse(29159.460980, 34073.992600, 729.976821, 729.976821, 0.000000, X, Y)
[Thu Jun 20 05:21:18 2013] Not overwriting source region fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src1_src.reg
[Thu Jun 20 05:21:18 2013] Extracting stamp from image fullrun_pn_xmm0502970101_pi300-10000_cl_sm2.00.img.gz, (294, 350) - (378, 434)
[Thu Jun 20 05:21:18 2013] XMMSAS bgd. selection expression = annulus(29159.460980, 34073.992600, 2433.256070, 4866.512140, X, Y) && !ellipse(23651.555298, 34828.787903, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31959.834930, 34648.707886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27162.420013, 34492.836426, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27600.680389, 29515.976044, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 20 05:21:18 2013] Writing fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src1.gif
[Thu Jun 20 05:21:19 2013] ../../xmm0502970101/products/events/fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0502970101/products/events/fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Thu Jun 20 05:21:19 2013] Mean detx,y = (-4364.02, 9612.02) 
[Thu Jun 20 05:21:19 2013] ../../xmm0502970101/products/images/fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src1_src.img and ../../xmm0502970101/products/images/fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Thu Jun 20 05:21:19 2013] ../../xmm0502970101/products/spectra/fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0502970101/products/spectra/fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Thu Jun 20 05:21:19 2013] Setting source spectrum file to fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun 20 05:21:19 2013] Setting bgd. spectrum file to fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jun 20 05:21:19 2013] ../../xmm0502970101/products/lightcurves/fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0502970101/products/lightcurves/fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Thu Jun 20 05:21:44 2013] fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src1.rmf exists, delete to re-create
[Thu Jun 20 05:21:44 2013] fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src1.arf exists, delete to re-create
[Thu Jun 20 06:09:52 2013] Updating aperture counts using extracted products
[Thu Jun 20 06:09:52 2013] Total counts from fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 2591.00
[Thu Jun 20 06:09:52 2013] Total counts from fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 27192.00
[Thu Jun 20 06:09:52 2013] Got source and background scale factors 1373259.000000, 47553220.000000
[Thu Jun 20 06:09:52 2013] User source parameters:
  Position = (335.7, 392.2) = 18 31 5.68 -32 12 43.4
  Extent = 6.1 (5.7-6.4)", rotation angle = 0
  Source aperture counts = 1805.7 +/- 51.9
  Background aperture counts = 785.3
  Rate = 0.03 +/- 0.0009

[Thu Jun 20 06:10:12 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 20 06:10:12 2013] Using photon index=1.80, rate=0.0245, arf fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src1.arf
[Thu Jun 20 06:10:12 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 20 06:10:12 2013] Updating source flux to 1.5e-13
[Thu Jun 20 06:11:15 2013] xmm0502970101/analysis//spectral/fullrun_pn_xmm0502970101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete