[Thu Jun 20 05:18:49 2013] Detection parameters:
  Position = (383.4, 202.1) = 18 30 49.25 -32 26 29.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 73.9 +/- 12.8
  Background counts = 38.4
  Rate = 0.001 +/- 0.0002

[Thu Jun 20 05:18:49 2013] Off-axis axis estimate = 9.32'
[Thu Jun 20 05:19:29 2013] Using EEF radius (= 11.09 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 05:19:29 2013] Initial guess for spatial extent in simple fitting = 11.09"
[Thu Jun 20 05:19:29 2013] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.968
[Thu Jun 20 05:19:29 2013] Giving source the simple spatial ID 33 for pass 0, mean size = 11.09"
[Thu Jun 20 05:19:31 2013] fullrun_mos2_xmm0502970101_pi300-10000_cl_pass0_src33.ximg exists
[Thu Jun 20 05:19:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502970101_pi300-10000_cl_pass0_src33.csv
[Thu Jun 20 05:19:31 2013] fullrun_mos2_xmm0502970101_pi300-10000_cl_pass0_src33_1.ximg exists
[Thu Jun 20 05:19:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502970101_pi300-10000_cl_pass0_src33.csv
[Thu Jun 20 05:19:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502970101_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502970101_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 05:19:31 2013] fullrun_mos2_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Thu Jun 20 05:19:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src33.csv
[Thu Jun 20 05:19:31 2013] fullrun_mos2_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Thu Jun 20 05:19:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src33.csv
[Thu Jun 20 05:19:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 05:20:04 2013] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 33 at 17.256316 pixels away
[Thu Jun 20 05:20:04 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 05:20:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 05:20:04 2013] Assessing source extent using major
[Thu Jun 20 05:20:04 2013] Source does appear to be extended
[Thu Jun 20 05:20:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 05:20:28 2013] Using EEF radius (= 11.09 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 05:20:28 2013] Initial guess for spatial extent in simple fitting = 11.09"
[Thu Jun 20 05:20:28 2013] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.968
[Thu Jun 20 05:20:28 2013] Giving source the simple spatial ID 33 for pass 1, mean size = 11.09"
[Thu Jun 20 05:20:29 2013] fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_src33.ximg exists
[Thu Jun 20 05:20:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_src33.csv
[Thu Jun 20 05:20:29 2013] fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_src33_1.ximg exists
[Thu Jun 20 05:20:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_src33.csv
[Thu Jun 20 05:20:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 05:20:30 2013] fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Thu Jun 20 05:20:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src33.csv
[Thu Jun 20 05:20:30 2013] fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Thu Jun 20 05:20:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src33.csv
[Thu Jun 20 05:20:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 05:20:58 2013] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 33 at 11.194767 pixels away
[Thu Jun 20 05:20:58 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 05:20:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 05:20:58 2013] Assessing source extent using major
[Thu Jun 20 05:20:58 2013] Source does appear to be extended
[Thu Jun 20 05:20:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 06:08:05 2013] XMMSAS src. selection expression = ellipse(33310.257172, 17531.781799, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 20 06:08:05 2013] Not overwriting source region fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src33_src.reg
[Thu Jun 20 06:08:05 2013] Extracting stamp from image fullrun_mos2_xmm0502970101_pi300-10000_cl_sm2.00.img.gz, (346, 165) - (421, 240)
[Thu Jun 20 06:08:05 2013] XMMSAS bgd. selection expression = annulus(33310.257172, 17531.781799, 1087.500000, 2175.000000, X, Y) && !ellipse(32079.268768, 20205.906067, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 20 06:08:05 2013] Writing fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src33.gif
[Thu Jun 20 06:08:07 2013] ../../xmm0502970101/products/events/fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src33_src.evt and ../../xmm0502970101/products/events/fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src33_bgd.evt exist, delete to re-create
[Thu Jun 20 06:08:07 2013] Mean detx,y = (8599.49, 6766.26) 
[Thu Jun 20 06:08:07 2013] ../../xmm0502970101/products/images/fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src33_src.img and ../../xmm0502970101/products/images/fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src33_bgd.img exist, delete to re-create
[Thu Jun 20 06:08:07 2013] ../../xmm0502970101/products/spectra/fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src33_src_b10.pi.gz and ../../xmm0502970101/products/spectra/fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src33_bgd.pi exist, delete to re-create
[Thu Jun 20 06:08:07 2013] Setting source spectrum file to fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Thu Jun 20 06:08:07 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Thu Jun 20 06:08:07 2013] ../../xmm0502970101/products/lightcurves/fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src33_src.lc and ../../xmm0502970101/products/lightcurves/fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src33_bgd.lc exist, delete to re-create
[Thu Jun 20 06:08:13 2013] Not generating rmf since there are only 73 counts
[Thu Jun 20 06:08:13 2013] rmf not generated due to insufficient counts
[Thu Jun 20 06:08:13 2013] fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src33.arf exists, delete to re-create
[Thu Jun 20 06:10:34 2013] Updating aperture counts using extracted products
[Thu Jun 20 06:10:34 2013] Total counts from fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src33_src_b10.pi.gz = 226.00
[Thu Jun 20 06:10:34 2013] Total counts from fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src33_bgd.pi.gz = 1569.00
[Thu Jun 20 06:10:34 2013] Got source and background scale factors 918428.000000, 9367738.000000
[Thu Jun 20 06:10:34 2013] User source parameters:
  Position = (383.4, 202.1) = 18 30 49.25 -32 26 29.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 72.2 +/- 16.1
  Background aperture counts = 153.8
  Rate = 0.001 +/- 0.0003

[Thu Jun 20 06:10:34 2013] Updating counts from extracted products
[Thu Jun 20 06:10:34 2013] Set source signif. to 72.17/12.40 = 5.82
[Thu Jun 20 06:10:36 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 20 06:10:36 2013] Using photon index=1.80, rate=0.00118, arf fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src33.arf
[Thu Jun 20 06:10:36 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 20 06:10:36 2013] Updating source flux to 3.4e-14
[Thu Jun 20 06:10:51 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 20 06:11:05 2013] xmm0502970101/analysis//spectral/fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src33_pl.csv not found, spectral fit skipped or did not complete