[Thu Jun 20 05:18:49 2013] Detection parameters:
  Position = (250.0, 210.9) = 18 31 35.11 -32 25 52.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 183.5 +/- 19.6
  Background counts = 70.1
  Rate = 0.004 +/- 0.0004

[Thu Jun 20 05:18:49 2013] Off-axis axis estimate = 7.25'
[Thu Jun 20 05:19:29 2013] Using EEF radius (= 10.05 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 05:19:29 2013] Initial guess for spatial extent in simple fitting = 10.05"
[Thu Jun 20 05:19:29 2013] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.139
[Thu Jun 20 05:19:29 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 10.05"
[Thu Jun 20 05:19:30 2013] fullrun_mos2_xmm0502970101_pi300-10000_cl_pass0_src11.ximg exists
[Thu Jun 20 05:19:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502970101_pi300-10000_cl_pass0_src11.csv
[Thu Jun 20 05:19:30 2013] fullrun_mos2_xmm0502970101_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu Jun 20 05:19:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502970101_pi300-10000_cl_pass0_src11.csv
[Thu Jun 20 05:19:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502970101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502970101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 05:19:31 2013] fullrun_mos2_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu Jun 20 05:19:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Thu Jun 20 05:19:31 2013] fullrun_mos2_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu Jun 20 05:19:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Thu Jun 20 05:19:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 05:20:04 2013] Spatial fit model total counts = 588.820000, observed total counts = 490.000000
[Thu Jun 20 05:20:04 2013] Poor agreement between spatial fit and data for source 32
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 20 05:20:04 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 05:20:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 05:20:04 2013] Assessing source extent using major
[Thu Jun 20 05:20:04 2013] Source does appear to be extended
[Thu Jun 20 05:20:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 05:20:28 2013] Using EEF radius (= 10.05 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 05:20:28 2013] Initial guess for spatial extent in simple fitting = 10.05"
[Thu Jun 20 05:20:28 2013] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.139
[Thu Jun 20 05:20:28 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 10.05"
[Thu Jun 20 05:20:29 2013] fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_src11.ximg exists
[Thu Jun 20 05:20:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_src11.csv
[Thu Jun 20 05:20:29 2013] fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_src11_1.ximg exists
[Thu Jun 20 05:20:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_src11.csv
[Thu Jun 20 05:20:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 05:20:29 2013] fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Thu Jun 20 05:20:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Thu Jun 20 05:20:29 2013] fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Thu Jun 20 05:20:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Thu Jun 20 05:20:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 05:20:58 2013] Spatial fit model total counts = 588.070000, observed total counts = 490.000000
[Thu Jun 20 05:20:58 2013] Poor agreement between spatial fit and data for source 32
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 20 05:20:58 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 05:20:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 05:20:58 2013] Assessing source extent using major
[Thu Jun 20 05:20:58 2013] Source does appear to be extended
[Thu Jun 20 05:20:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 06:08:05 2013] XMMSAS src. selection expression = ellipse(21699.237915, 18301.892960, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 20 06:08:05 2013] Not overwriting source region fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src32_src.reg
[Thu Jun 20 06:08:05 2013] Extracting stamp from image fullrun_mos2_xmm0502970101_pi300-10000_cl_sm2.00.img.gz, (212, 173) - (287, 248)
[Thu Jun 20 06:08:05 2013] XMMSAS bgd. selection expression = annulus(21699.237915, 18301.892960, 1087.500000, 2175.000000, X, Y)
[Thu Jun 20 06:08:05 2013] Writing fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src32.gif
[Thu Jun 20 06:08:06 2013] ../../xmm0502970101/products/events/fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src32_src.evt and ../../xmm0502970101/products/events/fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src32_bgd.evt exist, delete to re-create
[Thu Jun 20 06:08:06 2013] Mean detx,y = (-2999.41, 5945.95) 
[Thu Jun 20 06:08:06 2013] ../../xmm0502970101/products/images/fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src32_src.img and ../../xmm0502970101/products/images/fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src32_bgd.img exist, delete to re-create
[Thu Jun 20 06:08:06 2013] ../../xmm0502970101/products/spectra/fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src32_src_b10.pi.gz and ../../xmm0502970101/products/spectra/fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src32_bgd.pi exist, delete to re-create
[Thu Jun 20 06:08:06 2013] Setting source spectrum file to fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Thu Jun 20 06:08:06 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Thu Jun 20 06:08:06 2013] ../../xmm0502970101/products/lightcurves/fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src32_src.lc and ../../xmm0502970101/products/lightcurves/fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src32_bgd.lc exist, delete to re-create
[Thu Jun 20 06:08:13 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 20 06:08:13 2013] rmf not generated due to insufficient counts
[Thu Jun 20 06:08:13 2013] fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src32.arf exists, delete to re-create
[Thu Jun 20 06:10:29 2013] Updating aperture counts using extracted products
[Thu Jun 20 06:10:29 2013] Total counts from fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src32_src_b10.pi.gz = 409.00
[Thu Jun 20 06:10:29 2013] Total counts from fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src32_bgd.pi.gz = 2298.00
[Thu Jun 20 06:10:29 2013] Got source and background scale factors 1189286.000000, 10064002.000000
[Thu Jun 20 06:10:29 2013] User source parameters:
  Position = (250.0, 210.9) = 18 31 35.11 -32 25 52.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 137.4 +/- 21.2
  Background aperture counts = 271.6
  Rate = 0.002 +/- 0.0003

[Thu Jun 20 06:10:29 2013] Updating counts from extracted products
[Thu Jun 20 06:10:29 2013] Set source signif. to 137.44/16.48 = 8.34
[Thu Jun 20 06:10:35 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 20 06:10:35 2013] Using photon index=1.80, rate=0.00225, arf fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src32.arf
[Thu Jun 20 06:10:35 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 20 06:10:35 2013] Updating source flux to 3.7e-14
[Thu Jun 20 06:10:51 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 20 06:11:05 2013] xmm0502970101/analysis//spectral/fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src32_pl.csv not found, spectral fit skipped or did not complete