[Thu Jun 20 05:18:49 2013] Detection parameters:
  Position = (369.3, 232.8) = 18 30 54.12 -32 24 17.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 155.8 +/- 18.3
  Background counts = 58.4
  Rate = 0.004 +/- 0.0005

[Thu Jun 20 05:18:49 2013] Off-axis axis estimate = 7.00'
[Thu Jun 20 05:19:29 2013] Using EEF radius (= 9.93 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 05:19:29 2013] Initial guess for spatial extent in simple fitting = 9.93"
[Thu Jun 20 05:19:29 2013] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.969
[Thu Jun 20 05:19:29 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 9.93"
[Thu Jun 20 05:19:30 2013] fullrun_mos2_xmm0502970101_pi300-10000_cl_pass0_src10.ximg exists
[Thu Jun 20 05:19:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502970101_pi300-10000_cl_pass0_src10.csv
[Thu Jun 20 05:19:30 2013] fullrun_mos2_xmm0502970101_pi300-10000_cl_pass0_src10_1.ximg exists
[Thu Jun 20 05:19:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502970101_pi300-10000_cl_pass0_src10.csv
[Thu Jun 20 05:19:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502970101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502970101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 05:19:31 2013] fullrun_mos2_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Thu Jun 20 05:19:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Thu Jun 20 05:19:31 2013] fullrun_mos2_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Thu Jun 20 05:19:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Thu Jun 20 05:19:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 05:20:04 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 31 at 13.248736 pixels away
[Thu Jun 20 05:20:04 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 05:20:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 05:20:04 2013] Assessing source extent using major
[Thu Jun 20 05:20:04 2013] Source does appear to be extended
[Thu Jun 20 05:20:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 05:20:28 2013] Using EEF radius (= 9.93 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 05:20:28 2013] Initial guess for spatial extent in simple fitting = 9.93"
[Thu Jun 20 05:20:28 2013] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.969
[Thu Jun 20 05:20:28 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 9.93"
[Thu Jun 20 05:20:29 2013] fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_src10.ximg exists
[Thu Jun 20 05:20:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_src10.csv
[Thu Jun 20 05:20:29 2013] fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_src10_1.ximg exists
[Thu Jun 20 05:20:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_src10.csv
[Thu Jun 20 05:20:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 05:20:29 2013] fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Thu Jun 20 05:20:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Thu Jun 20 05:20:29 2013] fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Thu Jun 20 05:20:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Thu Jun 20 05:20:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 05:20:58 2013] Spatial fit model total counts = 451.501000, observed total counts = 397.000000
[Thu Jun 20 05:20:58 2013] Poor agreement between spatial fit and data for source 31
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 20 05:20:58 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 05:20:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 05:20:58 2013] Assessing source extent using major
[Thu Jun 20 05:20:58 2013] Source does appear to be extended
[Thu Jun 20 05:20:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 06:08:05 2013] XMMSAS src. selection expression = ellipse(32079.268768, 20205.906067, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 20 06:08:05 2013] Not overwriting source region fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src31_src.reg
[Thu Jun 20 06:08:05 2013] Extracting stamp from image fullrun_mos2_xmm0502970101_pi300-10000_cl_sm2.00.img.gz, (332, 195) - (407, 270)
[Thu Jun 20 06:08:05 2013] XMMSAS bgd. selection expression = annulus(32079.268768, 20205.906067, 1087.500000, 2175.000000, X, Y) && !ellipse(33310.257172, 17531.781799, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 20 06:08:05 2013] Writing fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src31.gif
[Thu Jun 20 06:08:06 2013] ../../xmm0502970101/products/events/fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src31_src.evt and ../../xmm0502970101/products/events/fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src31_bgd.evt exist, delete to re-create
[Thu Jun 20 06:08:06 2013] Mean detx,y = (7382.12, 4039.62) 
[Thu Jun 20 06:08:06 2013] ../../xmm0502970101/products/images/fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src31_src.img and ../../xmm0502970101/products/images/fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src31_bgd.img exist, delete to re-create
[Thu Jun 20 06:08:06 2013] ../../xmm0502970101/products/spectra/fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src31_src_b10.pi.gz and ../../xmm0502970101/products/spectra/fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src31_bgd.pi exist, delete to re-create
[Thu Jun 20 06:08:06 2013] Setting source spectrum file to fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Thu Jun 20 06:08:06 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Thu Jun 20 06:08:06 2013] ../../xmm0502970101/products/lightcurves/fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src31_src.lc and ../../xmm0502970101/products/lightcurves/fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src31_bgd.lc exist, delete to re-create
[Thu Jun 20 06:08:13 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 20 06:08:13 2013] rmf not generated due to insufficient counts
[Thu Jun 20 06:08:13 2013] fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src31.arf exists, delete to re-create
[Thu Jun 20 06:10:29 2013] Updating aperture counts using extracted products
[Thu Jun 20 06:10:29 2013] Total counts from fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src31_src_b10.pi.gz = 342.00
[Thu Jun 20 06:10:29 2013] Total counts from fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src31_bgd.pi.gz = 1868.00
[Thu Jun 20 06:10:29 2013] Got source and background scale factors 1324992.000000, 9629220.000000
[Thu Jun 20 06:10:29 2013] User source parameters:
  Position = (369.3, 232.8) = 18 30 54.12 -32 24 17.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 85.0 +/- 19.5
  Background aperture counts = 257.0
  Rate = 0.001 +/- 0.0003

[Thu Jun 20 06:10:29 2013] Updating counts from extracted products
[Thu Jun 20 06:10:29 2013] Set source signif. to 84.96/16.03 = 5.30
[Thu Jun 20 06:10:35 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 20 06:10:35 2013] Using photon index=1.80, rate=0.00139, arf fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src31.arf
[Thu Jun 20 06:10:35 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 20 06:10:35 2013] Updating source flux to 2.7e-14
[Thu Jun 20 06:10:51 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 20 06:11:05 2013] xmm0502970101/analysis//spectral/fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete