[Thu Jun 20 05:18:48 2013] Detection parameters:
  Position = (297.6, 299.7) = 18 31 18.74 -32 19 25.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 118.6 +/- 17.9
  Background counts = 73.4
  Rate = 0.002 +/- 0.0003

[Thu Jun 20 05:18:49 2013] Off-axis axis estimate = 0.11'
[Thu Jun 20 05:19:29 2013] Using EEF radius (= 6.48 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 05:19:29 2013] Initial guess for spatial extent in simple fitting = 6.48"
[Thu Jun 20 05:19:29 2013] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.010
[Thu Jun 20 05:19:29 2013] Giving source the simple spatial ID 22 for pass 0, mean size = 6.48"
[Thu Jun 20 05:19:30 2013] fullrun_mos2_xmm0502970101_pi300-10000_cl_pass0_src22.ximg exists
[Thu Jun 20 05:19:30 2013] fullrun_mos2_xmm0502970101_pi300-10000_cl_pass0_src22_1.ximg exists
[Thu Jun 20 05:19:30 2013] Fit fullrun_mos2_xmm0502970101_pi300-10000_cl_pass0_src22 appears to have run properly
[Thu Jun 20 05:19:31 2013] fullrun_mos2_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Thu Jun 20 05:19:31 2013] fullrun_mos2_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Thu Jun 20 05:19:31 2013] Fit fullrun_mos2_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Thu Jun 20 05:20:04 2013] Source 25 is offset by 3.169268 and 7.234575 pixels which is larger than
2 X fitted extent = 1.211894 x 1.211894, not incorporating fit results
[Thu Jun 20 05:20:04 2013] Spatial fit model total counts = 556.170000, observed total counts = 554.000000
[Thu Jun 20 05:20:04 2013] Offset between fit and detection position for source 25 = 0.319742 pixels
[Thu Jun 20 05:20:04 2013] 552.696000 total counts/ 483.695000 bgd. counts: snr = 3.137398
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.319742 pixels
  Position = (297.8, 300.0) = 18 31 18.68 -32 19 24.8
  Extent = 4.6 (3.3-6.3)", rotation angle = 0
  Source counts = 69.0 +/- 23.5
  Background counts = 483.7
  Rate = 0.001 +/- 0.0004
[Thu Jun 20 05:20:04 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 05:20:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 05:20:04 2013] Assessing source extent using major axis lower bound
[Thu Jun 20 05:20:04 2013] Source does appear to be extended
[Thu Jun 20 05:20:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 05:20:28 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 20 05:20:28 2013] Initial guess for spatial extent in simple fitting = 4.60"
[Thu Jun 20 05:20:28 2013] source mask rpix=1.1, npix_max = 9, mask sum = 12, frac = 1.238
[Thu Jun 20 05:20:28 2013] Giving source the simple spatial ID 22 for pass 1, mean size = 4.60"
[Thu Jun 20 05:20:29 2013] fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_src22.ximg exists
[Thu Jun 20 05:20:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_src22.csv
[Thu Jun 20 05:20:29 2013] fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_src22_1.ximg exists
[Thu Jun 20 05:20:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_src22.csv
[Thu Jun 20 05:20:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 05:20:30 2013] fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Thu Jun 20 05:20:30 2013] fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Thu Jun 20 05:20:30 2013] Fit fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Thu Jun 20 05:20:58 2013] Spatial fit model total counts = 561.999000, observed total counts = 562.000000
[Thu Jun 20 05:20:58 2013] Offset between fit and detection position for source 25 = 0.007914 pixels
[Thu Jun 20 05:20:58 2013] 559.417600 total counts/ 493.172000 bgd. counts: snr = 2.983031
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.007914 pixels
  Position = (297.8, 299.9) = 18 31 18.68 -32 19 24.8
  Extent = 4.5 (3.2-6.2)", rotation angle = 0
  Source counts = 66.2 +/- 23.7
  Background counts = 493.2
  Rate = 0.001 +/- 0.0004
[Thu Jun 20 05:20:58 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 05:20:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 05:20:58 2013] Assessing source extent using major axis lower bound
[Thu Jun 20 05:20:58 2013] Source does appear to be extended
[Thu Jun 20 05:20:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 06:08:05 2013] XMMSAS src. selection expression = ellipse(25860.562000, 26046.885000, 272.943608, 272.943608, 0.000000, X, Y)
[Thu Jun 20 06:08:05 2013] Not overwriting source region fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src25_src.reg
[Thu Jun 20 06:08:05 2013] Extracting stamp from image fullrun_mos2_xmm0502970101_pi300-10000_cl_sm2.00.img.gz, (282, 284) - (313, 316)
[Thu Jun 20 06:08:05 2013] XMMSAS bgd. selection expression = annulus(25860.562000, 26046.885000, 454.906013, 909.812026, X, Y) && !ellipse(25020.846832, 24811.149963, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 20 06:08:05 2013] Writing fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src25.gif
[Thu Jun 20 06:08:06 2013] ../../xmm0502970101/products/events/fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src25_src.evt and ../../xmm0502970101/products/events/fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src25_bgd.evt exist, delete to re-create
[Thu Jun 20 06:08:06 2013] Mean detx,y = (1135.77, -1741.34) 
[Thu Jun 20 06:08:06 2013] ../../xmm0502970101/products/images/fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src25_src.img and ../../xmm0502970101/products/images/fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src25_bgd.img exist, delete to re-create
[Thu Jun 20 06:08:06 2013] ../../xmm0502970101/products/spectra/fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src25_src_b10.pi.gz and ../../xmm0502970101/products/spectra/fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src25_bgd.pi exist, delete to re-create
[Thu Jun 20 06:08:06 2013] Setting source spectrum file to fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Thu Jun 20 06:08:06 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Thu Jun 20 06:08:06 2013] ../../xmm0502970101/products/lightcurves/fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src25_src.lc and ../../xmm0502970101/products/lightcurves/fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src25_bgd.lc exist, delete to re-create
[Thu Jun 20 06:08:13 2013] Not generating rmf since there are only 66 counts
[Thu Jun 20 06:08:13 2013] rmf not generated due to insufficient counts
[Thu Jun 20 06:08:13 2013] fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src25.arf exists, delete to re-create
[Thu Jun 20 06:10:31 2013] Updating aperture counts using extracted products
[Thu Jun 20 06:10:31 2013] Total counts from fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src25_src_b10.pi.gz = 130.00
[Thu Jun 20 06:10:32 2013] Total counts from fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src25_bgd.pi.gz = 420.00
[Thu Jun 20 06:10:32 2013] Got source and background scale factors 236800.000000, 1763980.000000
[Thu Jun 20 06:10:32 2013] User source parameters:
  Position = (297.8, 299.9) = 18 31 18.68 -32 19 24.8
  Extent = 4.5 (3.2-6.2)", rotation angle = 0
  Source aperture counts = 73.6 +/- 12.4
  Background aperture counts = 56.4
  Rate = 0.001 +/- 0.0002

[Thu Jun 20 06:10:36 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 20 06:10:36 2013] Using photon index=1.80, rate=0.00108, arf fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src25.arf
[Thu Jun 20 06:10:36 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 20 06:10:36 2013] Updating source flux to 1.6e-14
[Thu Jun 20 06:10:51 2013] Flag b found in src. 25 procflags, skipping spectral fitting
[Thu Jun 20 06:10:51 2013] Source 25 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Jun 20 06:11:05 2013] xmm0502970101/analysis//spectral/fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src25_pl.csv not found, spectral fit skipped or did not complete