[Thu Jun 20 05:18:48 2013] Detection parameters:
  Position = (250.2, 361.8) = 18 31 35.00 -32 14 58.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 149.0 +/- 16.9
  Background counts = 64.4
  Rate = 0.003 +/- 0.0004

[Thu Jun 20 05:18:49 2013] Off-axis axis estimate = 5.78'
[Thu Jun 20 05:19:29 2013] Using EEF radius (= 9.32 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 05:19:29 2013] Initial guess for spatial extent in simple fitting = 9.32"
[Thu Jun 20 05:19:29 2013] source mask rpix=2.1, npix_max = 27, mask sum = 20, frac = 0.716
[Thu Jun 20 05:19:29 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 9.32"
[Thu Jun 20 05:19:30 2013] fullrun_mos2_xmm0502970101_pi300-10000_cl_pass0_src14.ximg exists
[Thu Jun 20 05:19:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502970101_pi300-10000_cl_pass0_src14.csv
[Thu Jun 20 05:19:30 2013] fullrun_mos2_xmm0502970101_pi300-10000_cl_pass0_src14_1.ximg exists
[Thu Jun 20 05:19:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502970101_pi300-10000_cl_pass0_src14.csv
[Thu Jun 20 05:19:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502970101_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502970101_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 05:19:31 2013] fullrun_mos2_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Thu Jun 20 05:19:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src14.csv
[Thu Jun 20 05:19:31 2013] fullrun_mos2_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Thu Jun 20 05:19:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src14.csv
[Thu Jun 20 05:19:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 05:20:04 2013] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 11.478797 pixels away
[Thu Jun 20 05:20:04 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 05:20:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 05:20:04 2013] Assessing source extent using major
[Thu Jun 20 05:20:04 2013] Source does appear to be extended
[Thu Jun 20 05:20:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 05:20:28 2013] Using EEF radius (= 9.32 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 05:20:28 2013] Initial guess for spatial extent in simple fitting = 9.32"
[Thu Jun 20 05:20:28 2013] source mask rpix=2.1, npix_max = 27, mask sum = 20, frac = 0.716
[Thu Jun 20 05:20:28 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 9.32"
[Thu Jun 20 05:20:29 2013] fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_src14.ximg exists
[Thu Jun 20 05:20:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_src14.csv
[Thu Jun 20 05:20:29 2013] fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_src14_1.ximg exists
[Thu Jun 20 05:20:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_src14.csv
[Thu Jun 20 05:20:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 05:20:29 2013] fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Thu Jun 20 05:20:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src14.csv
[Thu Jun 20 05:20:29 2013] fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Thu Jun 20 05:20:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src14.csv
[Thu Jun 20 05:20:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 05:20:58 2013] Spatial fit model total counts = 655.966000, observed total counts = 434.000000
[Thu Jun 20 05:20:58 2013] Poor agreement between spatial fit and data for source 21
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 20 05:20:58 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 05:20:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 05:20:58 2013] Assessing source extent using major
[Thu Jun 20 05:20:58 2013] Source does appear to be extended
[Thu Jun 20 05:20:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 06:08:05 2013] XMMSAS src. selection expression = ellipse(21719.116119, 31431.584991, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 20 06:08:05 2013] Not overwriting source region fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src21_src.reg
[Thu Jun 20 06:08:05 2013] Extracting stamp from image fullrun_mos2_xmm0502970101_pi300-10000_cl_sm2.00.img.gz, (213, 324) - (288, 399)
[Thu Jun 20 06:08:05 2013] XMMSAS bgd. selection expression = annulus(21719.116119, 31431.584991, 1087.500000, 2175.000000, X, Y) && !ellipse(19683.243400, 29224.085400, 418.289612, 264.440008, 128.001637, X, Y) && !ellipse(19010.019806, 33374.044250, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 20 06:08:05 2013] Writing fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src21.gif
[Thu Jun 20 06:08:06 2013] ../../xmm0502970101/products/events/fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src21_src.evt and ../../xmm0502970101/products/events/fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src21_bgd.evt exist, delete to re-create
[Thu Jun 20 06:08:06 2013] Mean detx,y = (-3055.08, -7170.04) 
[Thu Jun 20 06:08:06 2013] ../../xmm0502970101/products/images/fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src21_src.img and ../../xmm0502970101/products/images/fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src21_bgd.img exist, delete to re-create
[Thu Jun 20 06:08:06 2013] ../../xmm0502970101/products/spectra/fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src21_src_b10.pi.gz and ../../xmm0502970101/products/spectra/fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src21_bgd.pi exist, delete to re-create
[Thu Jun 20 06:08:06 2013] Setting source spectrum file to fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Thu Jun 20 06:08:06 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Thu Jun 20 06:08:06 2013] ../../xmm0502970101/products/lightcurves/fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src21_src.lc and ../../xmm0502970101/products/lightcurves/fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src21_bgd.lc exist, delete to re-create
[Thu Jun 20 06:08:13 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 20 06:08:13 2013] rmf not generated due to insufficient counts
[Thu Jun 20 06:08:13 2013] fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src21.arf exists, delete to re-create
[Thu Jun 20 06:10:30 2013] Updating aperture counts using extracted products
[Thu Jun 20 06:10:30 2013] Total counts from fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src21_src_b10.pi.gz = 343.00
[Thu Jun 20 06:10:30 2013] Total counts from fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src21_bgd.pi.gz = 2146.00
[Thu Jun 20 06:10:30 2013] Got source and background scale factors 1047930.000000, 10210729.000000
[Thu Jun 20 06:10:30 2013] User source parameters:
  Position = (250.2, 361.8) = 18 31 35.00 -32 14 58.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 122.8 +/- 19.5
  Background aperture counts = 220.2
  Rate = 0.002 +/- 0.0003

[Thu Jun 20 06:10:30 2013] Updating counts from extracted products
[Thu Jun 20 06:10:30 2013] Set source signif. to 122.76/14.84 = 8.27
[Thu Jun 20 06:10:35 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 20 06:10:35 2013] Using photon index=1.80, rate=0.00201, arf fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src21.arf
[Thu Jun 20 06:10:35 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 20 06:10:35 2013] Updating source flux to 3.3e-14
[Thu Jun 20 06:10:51 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 20 06:11:05 2013] xmm0502970101/analysis//spectral/fullrun_mos2_xmm0502970101_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete