[Thu Jun 20 05:18:44 2013] Detection parameters:
  Position = (369.5, 233.0) = 18 30 54.04 -32 24 16.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 133.5 +/- 17.8
  Background counts = 69.1
  Rate = 0.003 +/- 0.0005

[Thu Jun 20 05:18:45 2013] Off-axis axis estimate = 7.01'
[Thu Jun 20 05:19:27 2013] Using EEF radius (= 9.93 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 05:19:27 2013] Initial guess for spatial extent in simple fitting = 9.93"
[Thu Jun 20 05:19:27 2013] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.968
[Thu Jun 20 05:19:27 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 9.93"
[Thu Jun 20 05:19:28 2013] fullrun_mos1_xmm0502970101_pi300-10000_cl_pass0_src15.ximg exists
[Thu Jun 20 05:19:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502970101_pi300-10000_cl_pass0_src15.csv
[Thu Jun 20 05:19:28 2013] fullrun_mos1_xmm0502970101_pi300-10000_cl_pass0_src15_1.ximg exists
[Thu Jun 20 05:19:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502970101_pi300-10000_cl_pass0_src15.csv
[Thu Jun 20 05:19:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502970101_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502970101_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 05:19:29 2013] fullrun_mos1_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Thu Jun 20 05:19:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src15.csv
[Thu Jun 20 05:19:29 2013] fullrun_mos1_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Thu Jun 20 05:19:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src15.csv
[Thu Jun 20 05:19:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 05:19:55 2013] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 17.588437 pixels away
[Thu Jun 20 05:19:55 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 05:19:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 05:19:55 2013] Assessing source extent using major
[Thu Jun 20 05:19:55 2013] Source does appear to be extended
[Thu Jun 20 05:19:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 05:20:26 2013] Using EEF radius (= 9.93 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 05:20:26 2013] Initial guess for spatial extent in simple fitting = 9.93"
[Thu Jun 20 05:20:26 2013] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.968
[Thu Jun 20 05:20:26 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 9.93"
[Thu Jun 20 05:20:27 2013] fullrun_mos1_xmm0502970101_pi300-10000_cl_pass1_src15.ximg exists
[Thu Jun 20 05:20:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502970101_pi300-10000_cl_pass1_src15.csv
[Thu Jun 20 05:20:28 2013] fullrun_mos1_xmm0502970101_pi300-10000_cl_pass1_src15_1.ximg exists
[Thu Jun 20 05:20:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502970101_pi300-10000_cl_pass1_src15.csv
[Thu Jun 20 05:20:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502970101_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502970101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 05:20:28 2013] fullrun_mos1_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Thu Jun 20 05:20:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src15.csv
[Thu Jun 20 05:20:28 2013] fullrun_mos1_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Thu Jun 20 05:20:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src15.csv
[Thu Jun 20 05:20:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 05:20:51 2013] Spatial fit model total counts = 467.409000, observed total counts = 407.000000
[Thu Jun 20 05:20:51 2013] Poor agreement between spatial fit and data for source 21
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 20 05:20:51 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 05:20:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 05:20:51 2013] Assessing source extent using major
[Thu Jun 20 05:20:51 2013] Source does appear to be extended
[Thu Jun 20 05:20:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 05:21:45 2013] XMMSAS src. selection expression = ellipse(32100.524933, 20222.705765, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 20 05:21:45 2013] Not overwriting source region fullrun_mos1_xmm0502970101_pi300-10000_pass1_cl_src21_src.reg
[Thu Jun 20 05:21:45 2013] Extracting stamp from image fullrun_mos1_xmm0502970101_pi300-10000_cl_sm2.00.img.gz, (332, 196) - (407, 271)
[Thu Jun 20 05:21:45 2013] XMMSAS bgd. selection expression = annulus(32100.524933, 20222.705765, 1087.500000, 2175.000000, X, Y) && !ellipse(33278.782800, 17653.948400, 871.040025, 437.338413, 276.414713, X, Y)
[Thu Jun 20 05:21:45 2013] Writing fullrun_mos1_xmm0502970101_pi300-10000_pass1_cl_src21.gif
[Thu Jun 20 05:21:47 2013] ../../xmm0502970101/products/events/fullrun_mos1_xmm0502970101_pi300-10000_pass1_cl_src21_src.evt and ../../xmm0502970101/products/events/fullrun_mos1_xmm0502970101_pi300-10000_pass1_cl_src21_bgd.evt exist, delete to re-create
[Thu Jun 20 05:21:47 2013] Mean detx,y = (4286.36, -7578.77) 
[Thu Jun 20 05:21:47 2013] ../../xmm0502970101/products/images/fullrun_mos1_xmm0502970101_pi300-10000_pass1_cl_src21_src.img and ../../xmm0502970101/products/images/fullrun_mos1_xmm0502970101_pi300-10000_pass1_cl_src21_bgd.img exist, delete to re-create
[Thu Jun 20 05:21:47 2013] ../../xmm0502970101/products/spectra/fullrun_mos1_xmm0502970101_pi300-10000_pass1_cl_src21_src_b10.pi.gz and ../../xmm0502970101/products/spectra/fullrun_mos1_xmm0502970101_pi300-10000_pass1_cl_src21_bgd.pi exist, delete to re-create
[Thu Jun 20 05:21:47 2013] Setting source spectrum file to fullrun_mos1_xmm0502970101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Thu Jun 20 05:21:47 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0502970101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Thu Jun 20 05:21:47 2013] ../../xmm0502970101/products/lightcurves/fullrun_mos1_xmm0502970101_pi300-10000_pass1_cl_src21_src.lc and ../../xmm0502970101/products/lightcurves/fullrun_mos1_xmm0502970101_pi300-10000_pass1_cl_src21_bgd.lc exist, delete to re-create
[Thu Jun 20 05:58:41 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 20 05:58:41 2013] rmf not generated due to insufficient counts
[Thu Jun 20 06:10:20 2013] Updating aperture counts using extracted products
[Thu Jun 20 06:10:20 2013] Total counts from fullrun_mos1_xmm0502970101_pi300-10000_pass1_cl_src21_src_b10.pi.gz = 334.00
[Thu Jun 20 06:10:20 2013] Total counts from fullrun_mos1_xmm0502970101_pi300-10000_pass1_cl_src21_bgd.pi.gz = 1952.00
[Thu Jun 20 06:10:20 2013] Got source and background scale factors 1280278.000000, 9826072.000000
[Thu Jun 20 06:10:20 2013] User source parameters:
  Position = (369.5, 233.0) = 18 30 54.04 -32 24 16.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 79.7 +/- 19.3
  Background aperture counts = 254.3
  Rate = 0.001 +/- 0.0003

[Thu Jun 20 06:10:20 2013] Updating counts from extracted products
[Thu Jun 20 06:10:20 2013] Set source signif. to 79.67/15.95 = 5.00
[Thu Jun 20 06:10:26 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 20 06:10:26 2013] Using photon index=1.80, rate=0.00132, arf fullrun_mos1_xmm0502970101_pi300-10000_pass1_cl_src21.arf
[Thu Jun 20 06:10:26 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 20 06:10:26 2013] Updating source flux to 2.4e-14
[Thu Jun 20 06:10:40 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 20 06:10:51 2013] xmm0502970101/analysis//spectral/fullrun_mos1_xmm0502970101_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete