[Thu Jun 20 05:18:44 2013] Detection parameters:
  Position = (226.9, 336.6) = 18 31 43.01 -32 16 44.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 188.1 +/- 20.5
  Background counts = 73.4
  Rate = 0.004 +/- 0.0004

[Thu Jun 20 05:18:45 2013] Off-axis axis estimate = 5.88'
[Thu Jun 20 05:19:27 2013] Using EEF radius (= 9.37 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 05:19:27 2013] Initial guess for spatial extent in simple fitting = 9.37"
[Thu Jun 20 05:19:27 2013] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.065
[Thu Jun 20 05:19:27 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 9.37"
[Thu Jun 20 05:19:28 2013] fullrun_mos1_xmm0502970101_pi300-10000_cl_pass0_src14.ximg exists
[Thu Jun 20 05:19:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502970101_pi300-10000_cl_pass0_src14.csv
[Thu Jun 20 05:19:28 2013] fullrun_mos1_xmm0502970101_pi300-10000_cl_pass0_src14_1.ximg exists
[Thu Jun 20 05:19:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502970101_pi300-10000_cl_pass0_src14.csv
[Thu Jun 20 05:19:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502970101_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502970101_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 05:19:29 2013] fullrun_mos1_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Thu Jun 20 05:19:29 2013] fullrun_mos1_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Thu Jun 20 05:19:29 2013] Fit fullrun_mos1_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Thu Jun 20 05:19:55 2013] Spatial fit model total counts = 531.143000, observed total counts = 532.000000
[Thu Jun 20 05:19:55 2013] Offset between fit and detection position for source 13 = 0.117309 pixels
[Thu Jun 20 05:19:55 2013] 527.339000 total counts/ 430.257000 bgd. counts: snr = 4.680311
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.117309 pixels
  Position = (226.7, 336.7) = 18 31 43.05 -32 16 45.0
  Extent = 4.7 (3.4-6.3)", rotation angle = 0
  Source counts = 97.1 +/- 23.0
  Background counts = 430.3
  Rate = 0.002 +/- 0.0004
[Thu Jun 20 05:19:55 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 05:19:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 05:19:55 2013] Assessing source extent using major axis lower bound
[Thu Jun 20 05:19:55 2013] Source does appear to be extended
[Thu Jun 20 05:19:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 05:20:26 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 20 05:20:26 2013] Initial guess for spatial extent in simple fitting = 4.72"
[Thu Jun 20 05:20:26 2013] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.895
[Thu Jun 20 05:20:26 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 4.72"
[Thu Jun 20 05:20:27 2013] fullrun_mos1_xmm0502970101_pi300-10000_cl_pass1_src14.ximg exists
[Thu Jun 20 05:20:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502970101_pi300-10000_cl_pass1_src14.csv
[Thu Jun 20 05:20:27 2013] fullrun_mos1_xmm0502970101_pi300-10000_cl_pass1_src14_1.ximg exists
[Thu Jun 20 05:20:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502970101_pi300-10000_cl_pass1_src14.csv
[Thu Jun 20 05:20:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502970101_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502970101_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 05:20:28 2013] fullrun_mos1_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Thu Jun 20 05:20:28 2013] fullrun_mos1_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Thu Jun 20 05:20:28 2013] Fit fullrun_mos1_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Thu Jun 20 05:20:51 2013] Spatial fit model total counts = 541.941000, observed total counts = 542.000000
[Thu Jun 20 05:20:51 2013] Offset between fit and detection position for source 13 = 0.023469 pixels
[Thu Jun 20 05:20:51 2013] 543.393100 total counts/ 449.265000 bgd. counts: snr = 4.440869
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.023469 pixels
  Position = (226.7, 336.6) = 18 31 43.05 -32 16 45.1
  Extent = 4.5 (3.3-6.2)", rotation angle = 0
  Source counts = 94.1 +/- 23.3
  Background counts = 449.3
  Rate = 0.002 +/- 0.0004
[Thu Jun 20 05:20:51 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 05:20:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 05:20:51 2013] Assessing source extent using major axis lower bound
[Thu Jun 20 05:20:51 2013] Source does appear to be extended
[Thu Jun 20 05:20:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 05:21:45 2013] XMMSAS src. selection expression = ellipse(19677.906400, 29238.989200, 271.929608, 271.929608, 0.000000, X, Y)
[Thu Jun 20 05:21:45 2013] Not overwriting source region fullrun_mos1_xmm0502970101_pi300-10000_pass1_cl_src13_src.reg
[Thu Jun 20 05:21:45 2013] Extracting stamp from image fullrun_mos1_xmm0502970101_pi300-10000_cl_sm2.00.img.gz, (211, 321) - (242, 352)
[Thu Jun 20 05:21:45 2013] XMMSAS bgd. selection expression = annulus(19677.906400, 29238.989200, 453.216013, 906.432026, X, Y)
[Thu Jun 20 05:21:45 2013] Writing fullrun_mos1_xmm0502970101_pi300-10000_pass1_cl_src13.gif
[Thu Jun 20 05:21:47 2013] ../../xmm0502970101/products/events/fullrun_mos1_xmm0502970101_pi300-10000_pass1_cl_src13_src.evt and ../../xmm0502970101/products/events/fullrun_mos1_xmm0502970101_pi300-10000_pass1_cl_src13_bgd.evt exist, delete to re-create
[Thu Jun 20 05:21:47 2013] Mean detx,y = (-4726.25, 4875.01) 
[Thu Jun 20 05:21:47 2013] ../../xmm0502970101/products/images/fullrun_mos1_xmm0502970101_pi300-10000_pass1_cl_src13_src.img and ../../xmm0502970101/products/images/fullrun_mos1_xmm0502970101_pi300-10000_pass1_cl_src13_bgd.img exist, delete to re-create
[Thu Jun 20 05:21:47 2013] ../../xmm0502970101/products/spectra/fullrun_mos1_xmm0502970101_pi300-10000_pass1_cl_src13_src_b10.pi.gz and ../../xmm0502970101/products/spectra/fullrun_mos1_xmm0502970101_pi300-10000_pass1_cl_src13_bgd.pi exist, delete to re-create
[Thu Jun 20 05:21:47 2013] Setting source spectrum file to fullrun_mos1_xmm0502970101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Thu Jun 20 05:21:47 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0502970101_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Thu Jun 20 05:21:47 2013] ../../xmm0502970101/products/lightcurves/fullrun_mos1_xmm0502970101_pi300-10000_pass1_cl_src13_src.lc and ../../xmm0502970101/products/lightcurves/fullrun_mos1_xmm0502970101_pi300-10000_pass1_cl_src13_bgd.lc exist, delete to re-create
[Thu Jun 20 05:58:36 2013] Not generating rmf since there are only 94 counts
[Thu Jun 20 05:58:36 2013] rmf not generated due to insufficient counts
[Thu Jun 20 06:10:20 2013] Updating aperture counts using extracted products
[Thu Jun 20 06:10:20 2013] Total counts from fullrun_mos1_xmm0502970101_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 155.00
[Thu Jun 20 06:10:20 2013] Total counts from fullrun_mos1_xmm0502970101_pi300-10000_pass1_cl_src13_bgd.pi.gz = 421.00
[Thu Jun 20 06:10:20 2013] Got source and background scale factors 235200.000000, 1852604.000000
[Thu Jun 20 06:10:20 2013] User source parameters:
  Position = (226.7, 336.6) = 18 31 43.05 -32 16 45.1
  Extent = 4.5 (3.3-6.2)", rotation angle = 0
  Source aperture counts = 101.6 +/- 13.5
  Background aperture counts = 53.4
  Rate = 0.002 +/- 0.0002

[Thu Jun 20 06:10:26 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 20 06:10:26 2013] Using photon index=1.80, rate=0.00156, arf fullrun_mos1_xmm0502970101_pi300-10000_pass1_cl_src13.arf
[Thu Jun 20 06:10:26 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 20 06:10:26 2013] Updating source flux to 3.1e-14
[Thu Jun 20 06:10:40 2013] Source 13 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Jun 20 06:10:51 2013] xmm0502970101/analysis//spectral/fullrun_mos1_xmm0502970101_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete