[Thu Jun 20 05:18:42 2013] Detection parameters:
  Position = (131.3, 162.9) = 18 32 15.91 -32 29 21.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 557.6 +/- 30.4
  Background counts = 49.6
  Rate = 0.008 +/- 0.0005

[Thu Jun 20 05:18:45 2013] Off-axis axis estimate = 15.60'
[Thu Jun 20 05:19:27 2013] Using EEF radius (= 14.23 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 05:19:27 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 20 05:19:27 2013] Initial guess for spatial extent in simple fitting = 14.23"
[Thu Jun 20 05:19:27 2013] source mask rpix=3.3, npix_max = 56, mask sum = 51, frac = 0.897
[Thu Jun 20 05:19:27 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 14.23"
[Thu Jun 20 05:19:28 2013] fullrun_mos1_xmm0502970101_pi300-10000_cl_pass0_src4.ximg exists
[Thu Jun 20 05:19:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502970101_pi300-10000_cl_pass0_src4.csv
[Thu Jun 20 05:19:28 2013] fullrun_mos1_xmm0502970101_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu Jun 20 05:19:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502970101_pi300-10000_cl_pass0_src4.csv
[Thu Jun 20 05:19:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502970101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502970101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 05:19:29 2013] fullrun_mos1_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu Jun 20 05:19:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Thu Jun 20 05:19:29 2013] fullrun_mos1_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu Jun 20 05:19:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Thu Jun 20 05:19:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502970101_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 05:19:55 2013] Spatial fit model total counts = 940.983000, observed total counts = 754.000000
[Thu Jun 20 05:19:55 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 20 05:19:55 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 05:19:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 05:19:55 2013] Assessing source extent using major
[Thu Jun 20 05:19:55 2013] Source does appear to be extended
[Thu Jun 20 05:19:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 05:20:26 2013] Using EEF radius (= 14.23 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 05:20:26 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 20 05:20:26 2013] Initial guess for spatial extent in simple fitting = 14.23"
[Thu Jun 20 05:20:26 2013] source mask rpix=3.3, npix_max = 56, mask sum = 51, frac = 0.897
[Thu Jun 20 05:20:26 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 14.23"
[Thu Jun 20 05:20:27 2013] fullrun_mos1_xmm0502970101_pi300-10000_cl_pass1_src4.ximg exists
[Thu Jun 20 05:20:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502970101_pi300-10000_cl_pass1_src4.csv
[Thu Jun 20 05:20:27 2013] fullrun_mos1_xmm0502970101_pi300-10000_cl_pass1_src4_1.ximg exists
[Thu Jun 20 05:20:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502970101_pi300-10000_cl_pass1_src4.csv
[Thu Jun 20 05:20:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502970101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502970101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 05:20:28 2013] fullrun_mos1_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Thu Jun 20 05:20:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Thu Jun 20 05:20:28 2013] fullrun_mos1_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Thu Jun 20 05:20:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Thu Jun 20 05:20:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502970101_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 05:20:51 2013] Spatial fit model total counts = 892.428000, observed total counts = 754.000000
[Thu Jun 20 05:20:51 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 20 05:20:51 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 05:20:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 05:20:51 2013] Assessing source extent using major
[Thu Jun 20 05:20:51 2013] Source does appear to be extended
[Thu Jun 20 05:20:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 05:21:44 2013] XMMSAS src. selection expression = ellipse(11376.910141, 14121.536057, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 20 05:21:44 2013] Not overwriting source region fullrun_mos1_xmm0502970101_pi300-10000_pass1_cl_src1_src.reg
[Thu Jun 20 05:21:44 2013] Extracting stamp from image fullrun_mos1_xmm0502970101_pi300-10000_cl_sm2.00.img.gz, (94, 125) - (169, 200)
[Thu Jun 20 05:21:45 2013] XMMSAS bgd. selection expression = annulus(11376.910141, 14121.536057, 1087.500000, 2175.000000, X, Y) && !ellipse(13956.459610, 15365.227448, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 20 05:21:45 2013] Writing fullrun_mos1_xmm0502970101_pi300-10000_pass1_cl_src1.gif
[Thu Jun 20 05:21:47 2013] ../../xmm0502970101/products/events/fullrun_mos1_xmm0502970101_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0502970101/products/events/fullrun_mos1_xmm0502970101_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Thu Jun 20 05:21:47 2013] Mean detx,y = (10355.84, 13118.88) 
[Thu Jun 20 05:21:47 2013] ../../xmm0502970101/products/images/fullrun_mos1_xmm0502970101_pi300-10000_pass1_cl_src1_src.img and ../../xmm0502970101/products/images/fullrun_mos1_xmm0502970101_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Thu Jun 20 05:21:47 2013] ../../xmm0502970101/products/spectra/fullrun_mos1_xmm0502970101_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0502970101/products/spectra/fullrun_mos1_xmm0502970101_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Thu Jun 20 05:21:47 2013] Setting source spectrum file to fullrun_mos1_xmm0502970101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun 20 05:21:47 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0502970101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jun 20 05:21:47 2013] ../../xmm0502970101/products/lightcurves/fullrun_mos1_xmm0502970101_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0502970101/products/lightcurves/fullrun_mos1_xmm0502970101_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Thu Jun 20 05:33:48 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 20 05:33:48 2013] rmf not generated due to insufficient counts
[Thu Jun 20 06:10:17 2013] Updating aperture counts using extracted products
[Thu Jun 20 06:10:17 2013] Total counts from fullrun_mos1_xmm0502970101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 560.00
[Thu Jun 20 06:10:17 2013] Total counts from fullrun_mos1_xmm0502970101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 940.00
[Thu Jun 20 06:10:17 2013] Got source and background scale factors 1058560.000000, 5752408.000000
[Thu Jun 20 06:10:17 2013] User source parameters:
  Position = (131.3, 162.9) = 18 32 15.91 -32 29 21.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 387.0 +/- 24.7
  Background aperture counts = 173.0
  Rate = 0.006 +/- 0.0004

[Thu Jun 20 06:10:17 2013] Updating counts from extracted products
[Thu Jun 20 06:10:17 2013] Set source signif. to 387.02/13.15 = 29.43
[Thu Jun 20 06:10:25 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 20 06:10:25 2013] Using photon index=1.80, rate=0.00641, arf fullrun_mos1_xmm0502970101_pi300-10000_pass1_cl_src1.arf
[Thu Jun 20 06:10:25 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 20 06:10:25 2013] Updating source flux to 2e-13
[Thu Jun 20 06:10:40 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 20 06:10:51 2013] xmm0502970101/analysis//spectral/fullrun_mos1_xmm0502970101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete