[Wed Mar 14 18:02:11 2012] Detection parameters:
  Position = (366.0, 328.7) = 0 32 23.66 85 15 59.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 417.0 +/- 30.5
  Background counts = 156.8
  Rate = 0.01 +/- 0.0009

[Wed Mar 14 18:02:15 2012] Off-axis axis estimate = 5.37'
[Wed Mar 14 18:09:12 2012] Using EEF radius (= 9.11 ")to estimate initial spatial extent for simple fitting
[Wed Mar 14 18:09:12 2012] Initial guess for spatial extent in simple fitting = 9.11"
[Wed Mar 14 18:09:12 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.114
[Wed Mar 14 18:09:12 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 9.11"
[Wed Mar 14 18:54:29 2012] fullrun_pn_xmm0502950201_pi300-10000_cl_pass0_src2.ximg exists
[Wed Mar 14 18:54:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502950201_pi300-10000_cl_pass0_src2.csv
[Wed Mar 14 18:54:30 2012] fullrun_pn_xmm0502950201_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed Mar 14 18:54:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502950201_pi300-10000_cl_pass0_src2.csv
[Wed Mar 14 18:54:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502950201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502950201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 14 18:54:30 2012] fullrun_pn_xmm0502950201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed Mar 14 18:54:30 2012] fullrun_pn_xmm0502950201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Mar 14 18:54:30 2012] Fit fullrun_pn_xmm0502950201_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Wed Mar 14 20:37:12 2012] Spatial fit model total counts = 688.463000, observed total counts = 689.000000
[Wed Mar 14 20:37:12 2012] Offset between fit and detection position for source 2 = 0.303842 pixels
[Wed Mar 14 20:37:12 2012] 675.591000 total counts/ 555.305000 bgd. counts: snr = 5.104454
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.303842 pixels
  Position = (365.7, 328.7) = 0 32 24.72 85 16 0.3
  Extent = 4.1 (3.5-4.6)", rotation angle = 0
  Source counts = 120.3 +/- 26.0
  Background counts = 555.3
  Rate = 0.009 +/- 0.002
[Wed Mar 14 20:37:13 2012] Vigneting correction estimate = 1.000000
[Wed Mar 14 20:37:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 14 20:37:13 2012] Assessing source extent using major axis lower bound
[Wed Mar 14 20:37:13 2012] Source does appear to be extended
[Wed Mar 14 20:37:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 14 20:37:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar 14 20:37:38 2012] Initial guess for spatial extent in simple fitting = 4.08"
[Wed Mar 14 20:37:38 2012] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.090
[Wed Mar 14 20:37:38 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 4.08"
[Wed Mar 14 21:17:44 2012] fullrun_pn_xmm0502950201_pi300-10000_cl_pass1_src2.ximg exists
[Wed Mar 14 21:17:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502950201_pi300-10000_cl_pass1_src2.csv
[Wed Mar 14 21:17:44 2012] fullrun_pn_xmm0502950201_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed Mar 14 21:17:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502950201_pi300-10000_cl_pass1_src2.csv
[Wed Mar 14 21:17:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502950201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502950201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 14 21:17:44 2012] fullrun_pn_xmm0502950201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed Mar 14 21:17:44 2012] fullrun_pn_xmm0502950201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Mar 14 21:17:44 2012] Fit fullrun_pn_xmm0502950201_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Wed Mar 14 22:32:46 2012] Spatial fit model total counts = 820.174000, observed total counts = 824.000000
[Wed Mar 14 22:32:46 2012] Offset between fit and detection position for source 2 = 0.021528 pixels
[Wed Mar 14 22:32:46 2012] 803.673000 total counts/ 691.027000 bgd. counts: snr = 4.285172
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.021528 pixels
  Position = (365.7, 328.7) = 0 32 24.66 85 16 0.2
  Extent = 4.0 (3.1-4.5)", rotation angle = 0
  Source counts = 112.6 +/- 28.3
  Background counts = 691.0
  Rate = 0.008 +/- 0.002
[Wed Mar 14 22:32:46 2012] Vigneting correction estimate = 1.000000
[Wed Mar 14 22:32:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 14 22:32:46 2012] Assessing source extent using major axis lower bound
[Wed Mar 14 22:32:46 2012] Source does appear to be extended
[Wed Mar 14 22:32:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 14 22:33:04 2012] XMMSAS src. selection expression = ellipse(31771.319000, 28546.274000, 237.351607, 237.351607, 0.000000, X, Y)
[Wed Mar 14 22:33:04 2012] Writing source region out to fullrun_pn_xmm0502950201_pi300-10000_pass1_cl_src2_src.reg
[Wed Mar 14 22:33:04 2012] Extracting stamp from image fullrun_pn_xmm0502950201_pi300-10000_cl_sm2.00.img.gz, (352, 315) - (379, 342)
[Wed Mar 14 22:33:04 2012] XMMSAS bgd. selection expression = annulus(31771.319000, 28546.274000, 395.586011, 791.172023, X, Y) && !ellipse(30851.544220, 28887.710200, 438.902413, 438.902413, 0.000000, X, Y) && !ellipse(30979.693695, 27252.011322, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 14 22:33:04 2012] Writing fullrun_pn_xmm0502950201_pi300-10000_pass1_cl_src2.gif
[Wed Mar 14 22:36:10 2012] Mean detx,y = (-567.23, -4923.41) 
[Wed Mar 14 22:36:12 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 14 22:36:24 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 14 22:36:25 2012] Setting source spectrum file to fullrun_pn_xmm0502950201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Mar 14 22:36:25 2012] Setting bgd. spectrum file to fullrun_pn_xmm0502950201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Mar 15 00:12:13 2012] Updating aperture counts using extracted products
[Thu Mar 15 00:12:13 2012] Error reading totcts from fullrun_pn_xmm0502950201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Mar 15 00:12:15 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 15 00:12:15 2012] Using photon index=1.80, rate=0.00811, arf fullrun_pn_xmm0502950201_pi300-10000_pass1_cl_src2.arf
[Thu Mar 15 00:12:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 15 00:12:15 2012] Updating source flux to 3.8e-14
[Thu Mar 15 00:13:31 2012] Reading fit data from xmm0502950201/analysis//spectral/fullrun_pn_xmm0502950201_pi300-10000_pass1_cl_src2_pl.csv
[Thu Mar 15 00:13:31 2012] Spectral fit parameter nH value = 9.50699e+20
[Thu Mar 15 00:13:31 2012] Spectral fit parameter PhoIndex value = 1.99185
[Thu Mar 15 00:13:31 2012] Failed to get F(0.3-8.0) from xmm0502950201/analysis//spectral/fullrun_pn_xmm0502950201_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Thu Mar 15 00:13:31 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 15 00:13:31 2012] Using Nh = 9.5e+20, photon index=1.99, rate=0.00811, arf fullrun_pn_xmm0502950201_pi300-10000_pass1_cl_src2.arf
[Thu Mar 15 00:13:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 15 00:13:31 2012] Updating source flux to 4.2e-14