[Wed Mar 14 18:02:22 2012] Detection parameters:
  Position = (373.2, 479.4) = 0 31 47.92 85 26 59.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 84.5 +/- 15.7
  Background counts = 92.7
  Rate = 0.001 +/- 0.0003

[Wed Mar 14 18:02:25 2012] Off-axis axis estimate = 14.19'
[Wed Mar 14 19:41:18 2012] Using EEF radius (= 13.53 ")to estimate initial spatial extent for simple fitting
[Wed Mar 14 19:41:18 2012] Initial guess for spatial extent in simple fitting = 13.53"
[Wed Mar 14 19:41:18 2012] source mask rpix=3.1, npix_max = 52, mask sum = 41, frac = 0.787
[Wed Mar 14 19:41:18 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 13.53"
[Wed Mar 14 20:37:04 2012] fullrun_mos2_xmm0502950201_pi300-10000_cl_pass0_src26.ximg exists
[Wed Mar 14 20:37:04 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0502950201_pi300-10000_cl_pass0_src26.csv
[Wed Mar 14 20:37:04 2012] fullrun_mos2_xmm0502950201_pi300-10000_cl_pass0_src26_1.ximg exists
[Wed Mar 14 20:37:04 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0502950201_pi300-10000_cl_pass0_src26.csv
[Wed Mar 14 20:37:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502950201_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502950201_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 14 20:37:04 2012] fullrun_mos2_xmm0502950201_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Wed Mar 14 20:37:04 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0502950201_pi300-10000_cl_pass0_tfrozen_src26.csv
[Wed Mar 14 20:37:04 2012] fullrun_mos2_xmm0502950201_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Wed Mar 14 20:37:04 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0502950201_pi300-10000_cl_pass0_tfrozen_src26.csv
[Wed Mar 14 20:37:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502950201_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502950201_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 14 20:37:24 2012] Source 10 is offset by -6.873762 and -2.697004 pixels which is larger than
2 X fitted extent = 1.508253 x 1.508253, not incorporating fit results
[Wed Mar 14 20:37:24 2012] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 16.104251 pixels away
[Wed Mar 14 20:37:24 2012] Vigneting correction estimate = 1.000000
[Wed Mar 14 20:37:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 14 20:37:24 2012] Assessing source extent using major
[Wed Mar 14 20:37:24 2012] Source does appear to be extended
[Wed Mar 14 20:37:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 14 20:37:24 2012] Source is confused with source 9
[Wed Mar 14 21:50:42 2012] Using EEF radius (= 13.53 ")to estimate initial spatial extent for simple fitting
[Wed Mar 14 21:50:42 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Mar 14 21:50:42 2012] Initial guess for spatial extent in simple fitting = 13.53"
[Wed Mar 14 21:50:42 2012] source mask rpix=3.1, npix_max = 52, mask sum = 41, frac = 0.787
[Wed Mar 14 21:50:42 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 13.53"
[Wed Mar 14 22:32:39 2012] fullrun_mos2_xmm0502950201_pi300-10000_cl_pass1_src24.ximg exists
[Wed Mar 14 22:32:39 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0502950201_pi300-10000_cl_pass1_src24.csv
[Wed Mar 14 22:32:39 2012] fullrun_mos2_xmm0502950201_pi300-10000_cl_pass1_src24_1.ximg exists
[Wed Mar 14 22:32:39 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0502950201_pi300-10000_cl_pass1_src24.csv
[Wed Mar 14 22:32:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502950201_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502950201_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 14 22:32:40 2012] fullrun_mos2_xmm0502950201_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Wed Mar 14 22:32:40 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0502950201_pi300-10000_cl_pass1_tfrozen_src24.csv
[Wed Mar 14 22:32:40 2012] fullrun_mos2_xmm0502950201_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Wed Mar 14 22:32:40 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0502950201_pi300-10000_cl_pass1_tfrozen_src24.csv
[Wed Mar 14 22:32:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502950201_pi300-10000_cl_pass1_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502950201_pi300-10000_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 14 22:32:54 2012] Source 10 is offset by -6.873762 and -2.697004 pixels which is larger than
2 X fitted extent = 1.508253 x 1.508253, not incorporating fit results
[Wed Mar 14 22:32:54 2012] Warning: source 24 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 16.302185 pixels away
[Wed Mar 14 22:32:54 2012] Vigneting correction estimate = 1.000000
[Wed Mar 14 22:32:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 14 22:32:54 2012] Assessing source extent using major
[Wed Mar 14 22:32:54 2012] Source does appear to be extended
[Wed Mar 14 22:32:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 14 23:43:36 2012] XMMSAS src. selection expression = ellipse(32419.226685, 41656.604614, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Mar 14 23:43:36 2012] Writing source region out to fullrun_mos2_xmm0502950201_pi300-10000_pass1_cl_src10_src.reg
[Wed Mar 14 23:43:36 2012] Extracting stamp from image fullrun_mos2_xmm0502950201_pi300-10000_cl_sm2.00.img.gz, (336, 442) - (411, 517)
[Wed Mar 14 23:43:36 2012] XMMSAS bgd. selection expression = annulus(32419.226685, 41656.604614, 1087.500000, 2175.000000, X, Y) && !ellipse(30795.933807, 39270.389069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32001.606506, 40781.663605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31819.986572, 41782.269806, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 14 23:43:36 2012] Writing fullrun_mos2_xmm0502950201_pi300-10000_pass1_cl_src10.gif
[Wed Mar 14 23:55:08 2012] Mean detx,y = (11881.41, 11383.20) 
[Wed Mar 14 23:55:09 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 14 23:55:23 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 14 23:55:23 2012] Setting source spectrum file to fullrun_mos2_xmm0502950201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Mar 14 23:55:23 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502950201_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Thu Mar 15 00:10:02 2012] Not generating rmf since there are only 84 counts
[Thu Mar 15 00:10:02 2012] rmf not generated due to insufficient counts
[Thu Mar 15 00:12:20 2012] Updating aperture counts using extracted products
[Thu Mar 15 00:12:20 2012] Error reading totcts from fullrun_mos2_xmm0502950201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu Mar 15 00:12:21 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 15 00:12:21 2012] Using photon index=1.80, rate=0.00144, arf fullrun_mos2_xmm0502950201_pi300-10000_pass1_cl_src10.arf
[Thu Mar 15 00:12:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 15 00:12:21 2012] Updating source flux to 6.6e-14
[Thu Mar 15 00:12:41 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting