[Sat Jun 15 21:11:31 2013] Detection parameters:
  Position = (334.2, 259.4) = 20 38 24.53 -1 27 40.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 101.4 +/- 14.1
  Background counts = 61.5
  Rate = 0.003 +/- 0.0005

[Sat Jun 15 21:11:32 2013] Off-axis axis estimate = 3.84'
[Sat Jun 15 21:11:59 2013] Using EEF radius (= 8.35 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 21:11:59 2013] Initial guess for spatial extent in simple fitting = 8.35"
[Sat Jun 15 21:11:59 2013] source mask rpix=1.9, npix_max = 23, mask sum = 17, frac = 0.726
[Sat Jun 15 21:11:59 2013] Giving source the simple spatial ID 43 for pass 0, mean size = 8.35"
[Sat Jun 15 21:12:00 2013] fullrun_pn_xmm0502950101_pi300-10000_cl_pass0_src43.ximg exists
[Sat Jun 15 21:12:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502950101_pi300-10000_cl_pass0_src43.csv
[Sat Jun 15 21:12:00 2013] fullrun_pn_xmm0502950101_pi300-10000_cl_pass0_src43_1.ximg exists
[Sat Jun 15 21:12:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502950101_pi300-10000_cl_pass0_src43.csv
[Sat Jun 15 21:12:00 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502950101_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502950101_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 21:12:01 2013] fullrun_pn_xmm0502950101_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Sat Jun 15 21:12:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502950101_pi300-10000_cl_pass0_tfrozen_src43.csv
[Sat Jun 15 21:12:01 2013] fullrun_pn_xmm0502950101_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Sat Jun 15 21:12:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502950101_pi300-10000_cl_pass0_tfrozen_src43.csv
[Sat Jun 15 21:12:01 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502950101_pi300-10000_cl_pass0_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502950101_pi300-10000_cl_pass0_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 21:12:15 2013] Spatial fit model total counts = 690.872000, observed total counts = 490.000000
[Sat Jun 15 21:12:15 2013] Poor agreement between spatial fit and data for source 44
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 15 21:12:15 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 21:12:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 21:12:15 2013] Assessing source extent using major
[Sat Jun 15 21:12:15 2013] Source does appear to be extended
[Sat Jun 15 21:12:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 21:12:39 2013] Using EEF radius (= 8.35 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 21:12:39 2013] Initial guess for spatial extent in simple fitting = 8.35"
[Sat Jun 15 21:12:39 2013] source mask rpix=1.9, npix_max = 23, mask sum = 17, frac = 0.726
[Sat Jun 15 21:12:39 2013] Giving source the simple spatial ID 42 for pass 1, mean size = 8.35"
[Sat Jun 15 21:12:40 2013] fullrun_pn_xmm0502950101_pi300-10000_cl_pass1_src42.ximg exists
[Sat Jun 15 21:12:40 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502950101_pi300-10000_cl_pass1_src42.csv
[Sat Jun 15 21:12:40 2013] fullrun_pn_xmm0502950101_pi300-10000_cl_pass1_src42_1.ximg exists
[Sat Jun 15 21:12:40 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502950101_pi300-10000_cl_pass1_src42.csv
[Sat Jun 15 21:12:40 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502950101_pi300-10000_cl_pass1_src42_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502950101_pi300-10000_cl_pass1_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 21:12:40 2013] fullrun_pn_xmm0502950101_pi300-10000_cl_pass1_tfrozen_src42.ximg exists
[Sat Jun 15 21:12:40 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502950101_pi300-10000_cl_pass1_tfrozen_src42.csv
[Sat Jun 15 21:12:40 2013] fullrun_pn_xmm0502950101_pi300-10000_cl_pass1_tfrozen_src42_1.ximg exists
[Sat Jun 15 21:12:40 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502950101_pi300-10000_cl_pass1_tfrozen_src42.csv
[Sat Jun 15 21:12:40 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502950101_pi300-10000_cl_pass1_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502950101_pi300-10000_cl_pass1_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 21:12:54 2013] Source 44 is offset by 7.676486 and -3.397067 pixels which is larger than
2 X fitted extent = 7.675678 x 7.675678, not incorporating fit results
[Sat Jun 15 21:12:54 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 21:12:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 21:12:54 2013] Assessing source extent using major
[Sat Jun 15 21:12:54 2013] Source does appear to be extended
[Sat Jun 15 21:12:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 21:13:18 2013] XMMSAS src. selection expression = ellipse(29029.662292, 22523.165192, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 21:13:18 2013] Not overwriting source region fullrun_pn_xmm0502950101_pi300-10000_pass1_cl_src44_src.reg
[Sat Jun 15 21:13:18 2013] Extracting stamp from image fullrun_pn_xmm0502950101_pi300-10000_cl_sm2.00.img.gz, (297, 222) - (372, 297)
[Sat Jun 15 21:13:18 2013] XMMSAS bgd. selection expression = annulus(29029.662292, 22523.165192, 1087.500000, 2175.000000, X, Y) && !ellipse(27787.323000, 20441.679800, 696.251220, 696.251220, 0.000000, X, Y) && !ellipse(27806.881240, 21241.782600, 284.275208, 284.275208, 0.000000, X, Y)
[Sat Jun 15 21:13:18 2013] Writing fullrun_pn_xmm0502950101_pi300-10000_pass1_cl_src44.gif
[Sat Jun 15 21:13:23 2013] ../../xmm0502950101/products/events/fullrun_pn_xmm0502950101_pi300-10000_pass1_cl_src44_src.evt and ../../xmm0502950101/products/events/fullrun_pn_xmm0502950101_pi300-10000_pass1_cl_src44_bgd.evt exist, delete to re-create
[Sat Jun 15 21:13:23 2013] Mean detx,y = (2789.34, 3800.79) 
[Sat Jun 15 21:13:23 2013] ../../xmm0502950101/products/images/fullrun_pn_xmm0502950101_pi300-10000_pass1_cl_src44_src.img and ../../xmm0502950101/products/images/fullrun_pn_xmm0502950101_pi300-10000_pass1_cl_src44_bgd.img exist, delete to re-create
[Sat Jun 15 21:13:23 2013] ../../xmm0502950101/products/spectra/fullrun_pn_xmm0502950101_pi300-10000_pass1_cl_src44_src.pi and ../../xmm0502950101/products/spectra/fullrun_pn_xmm0502950101_pi300-10000_pass1_cl_src44_bgd.pi exist, delete to re-create
[Sat Jun 15 21:13:23 2013] Setting source spectrum file to fullrun_pn_xmm0502950101_pi300-10000_pass1_cl_src44_src.pi.gz
[Sat Jun 15 21:13:23 2013] Setting bgd. spectrum file to fullrun_pn_xmm0502950101_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Sat Jun 15 21:13:23 2013] ../../xmm0502950101/products/lightcurves/fullrun_pn_xmm0502950101_pi300-10000_pass1_cl_src44_src.lc and ../../xmm0502950101/products/lightcurves/fullrun_pn_xmm0502950101_pi300-10000_pass1_cl_src44_bgd.lc exist, delete to re-create
[Sat Jun 15 21:13:33 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 15 21:13:33 2013] rmf not generated due to insufficient counts
[Sat Jun 15 21:25:34 2013] Updating aperture counts using extracted products
[Sat Jun 15 21:25:34 2013] Total counts from fullrun_pn_xmm0502950101_pi300-10000_pass1_cl_src44_src.pi.gz = 360.00
[Sat Jun 15 21:25:34 2013] Total counts from fullrun_pn_xmm0502950101_pi300-10000_pass1_cl_src44_bgd.pi.gz = 2991.00
[Sat Jun 15 21:25:34 2013] Got source and background scale factors 1046364.000000, 9219129.000000
[Sat Jun 15 21:25:34 2013] User source parameters:
  Position = (334.2, 259.4) = 20 38 24.53 -1 27 40.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 20.5 +/- 20.0
  Background aperture counts = 339.5
  Rate = 0.0004 +/- 0.0004

[Sat Jun 15 21:25:34 2013] Updating counts from extracted products
[Sat Jun 15 21:25:34 2013] Set source signif. to 20.52/18.42 = 1.11
[Sat Jun 15 21:25:37 2013] No arf file for this source, not re-computing flux
[Sat Jun 15 21:25:55 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 15 21:25:57 2013] xmm0502950101/analysis//spectral/fullrun_pn_xmm0502950101_pi300-10000_pass1_cl_src44_pl.csv not found, spectral fit skipped or did not complete