[Sat Jun 15 21:11:31 2013] Detection parameters:
  Position = (266.9, 314.2) = 20 38 44.07 -1 23 41.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 88.8 +/- 13.4
  Background counts = 50.0
  Rate = 0.003 +/- 0.0005

[Sat Jun 15 21:11:32 2013] Off-axis axis estimate = 2.56'
[Sat Jun 15 21:11:59 2013] Using EEF radius (= 7.71 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 21:11:59 2013] Initial guess for spatial extent in simple fitting = 7.71"
[Sat Jun 15 21:11:59 2013] source mask rpix=1.8, npix_max = 20, mask sum = 14, frac = 0.678
[Sat Jun 15 21:11:59 2013] Giving source the simple spatial ID 34 for pass 0, mean size = 7.71"
[Sat Jun 15 21:12:00 2013] fullrun_pn_xmm0502950101_pi300-10000_cl_pass0_src34.ximg exists
[Sat Jun 15 21:12:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502950101_pi300-10000_cl_pass0_src34.csv
[Sat Jun 15 21:12:00 2013] fullrun_pn_xmm0502950101_pi300-10000_cl_pass0_src34_1.ximg exists
[Sat Jun 15 21:12:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502950101_pi300-10000_cl_pass0_src34.csv
[Sat Jun 15 21:12:00 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502950101_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502950101_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 21:12:00 2013] fullrun_pn_xmm0502950101_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Sat Jun 15 21:12:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502950101_pi300-10000_cl_pass0_tfrozen_src34.csv
[Sat Jun 15 21:12:00 2013] fullrun_pn_xmm0502950101_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Sat Jun 15 21:12:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502950101_pi300-10000_cl_pass0_tfrozen_src34.csv
[Sat Jun 15 21:12:00 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502950101_pi300-10000_cl_pass0_tfrozen_src34_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502950101_pi300-10000_cl_pass0_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 21:12:15 2013] Source 35 is offset by -3.624907 and -2.817645 pixels which is larger than
2 X fitted extent = 0.876671 x 0.876671, not incorporating fit results
[Sat Jun 15 21:12:15 2013] Spatial fit model total counts = 524.193000, observed total counts = 439.000000
[Sat Jun 15 21:12:15 2013] Poor agreement between spatial fit and data for source 35
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 15 21:12:15 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 21:12:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 21:12:15 2013] Assessing source extent using major
[Sat Jun 15 21:12:15 2013] Source does appear to be extended
[Sat Jun 15 21:12:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 21:12:39 2013] Using EEF radius (= 7.71 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 21:12:39 2013] Initial guess for spatial extent in simple fitting = 7.71"
[Sat Jun 15 21:12:39 2013] source mask rpix=1.8, npix_max = 20, mask sum = 14, frac = 0.678
[Sat Jun 15 21:12:39 2013] Giving source the simple spatial ID 33 for pass 1, mean size = 7.71"
[Sat Jun 15 21:12:39 2013] fullrun_pn_xmm0502950101_pi300-10000_cl_pass1_src33.ximg exists
[Sat Jun 15 21:12:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502950101_pi300-10000_cl_pass1_src33.csv
[Sat Jun 15 21:12:39 2013] fullrun_pn_xmm0502950101_pi300-10000_cl_pass1_src33_1.ximg exists
[Sat Jun 15 21:12:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502950101_pi300-10000_cl_pass1_src33.csv
[Sat Jun 15 21:12:39 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502950101_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502950101_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 21:12:40 2013] fullrun_pn_xmm0502950101_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Sat Jun 15 21:12:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502950101_pi300-10000_cl_pass1_tfrozen_src33.csv
[Sat Jun 15 21:12:40 2013] fullrun_pn_xmm0502950101_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Sat Jun 15 21:12:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502950101_pi300-10000_cl_pass1_tfrozen_src33.csv
[Sat Jun 15 21:12:40 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502950101_pi300-10000_cl_pass1_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502950101_pi300-10000_cl_pass1_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 21:12:54 2013] Spatial fit model total counts = 529.319000, observed total counts = 439.000000
[Sat Jun 15 21:12:54 2013] Poor agreement between spatial fit and data for source 35
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 15 21:12:54 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 21:12:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 21:12:54 2013] Assessing source extent using major
[Sat Jun 15 21:12:54 2013] Source does appear to be extended
[Sat Jun 15 21:12:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 21:13:18 2013] XMMSAS src. selection expression = ellipse(23169.901123, 27284.200897, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 21:13:18 2013] Not overwriting source region fullrun_pn_xmm0502950101_pi300-10000_pass1_cl_src35_src.reg
[Sat Jun 15 21:13:18 2013] Extracting stamp from image fullrun_pn_xmm0502950101_pi300-10000_cl_sm2.00.img.gz, (229, 277) - (304, 352)
[Sat Jun 15 21:13:18 2013] XMMSAS bgd. selection expression = annulus(23169.901123, 27284.200897, 1087.500000, 2175.000000, X, Y) && !ellipse(21586.381200, 25691.037600, 435.212813, 359.455210, 98.590887, X, Y) && !ellipse(24061.098877, 28114.290497, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 21:13:18 2013] Writing fullrun_pn_xmm0502950101_pi300-10000_pass1_cl_src35.gif
[Sat Jun 15 21:13:22 2013] ../../xmm0502950101/products/events/fullrun_pn_xmm0502950101_pi300-10000_pass1_cl_src35_src.evt and ../../xmm0502950101/products/events/fullrun_pn_xmm0502950101_pi300-10000_pass1_cl_src35_bgd.evt exist, delete to re-create
[Sat Jun 15 21:13:22 2013] Mean detx,y = (-4151.88, 976.35) 
[Sat Jun 15 21:13:22 2013] ../../xmm0502950101/products/images/fullrun_pn_xmm0502950101_pi300-10000_pass1_cl_src35_src.img and ../../xmm0502950101/products/images/fullrun_pn_xmm0502950101_pi300-10000_pass1_cl_src35_bgd.img exist, delete to re-create
[Sat Jun 15 21:13:22 2013] ../../xmm0502950101/products/spectra/fullrun_pn_xmm0502950101_pi300-10000_pass1_cl_src35_src.pi and ../../xmm0502950101/products/spectra/fullrun_pn_xmm0502950101_pi300-10000_pass1_cl_src35_bgd.pi exist, delete to re-create
[Sat Jun 15 21:13:22 2013] Setting source spectrum file to fullrun_pn_xmm0502950101_pi300-10000_pass1_cl_src35_src.pi.gz
[Sat Jun 15 21:13:22 2013] Setting bgd. spectrum file to fullrun_pn_xmm0502950101_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Sat Jun 15 21:13:22 2013] ../../xmm0502950101/products/lightcurves/fullrun_pn_xmm0502950101_pi300-10000_pass1_cl_src35_src.lc and ../../xmm0502950101/products/lightcurves/fullrun_pn_xmm0502950101_pi300-10000_pass1_cl_src35_bgd.lc exist, delete to re-create
[Sat Jun 15 21:13:33 2013] Not generating rmf since there are only 88 counts
[Sat Jun 15 21:13:33 2013] rmf not generated due to insufficient counts
[Sat Jun 15 21:25:32 2013] Updating aperture counts using extracted products
[Sat Jun 15 21:25:32 2013] Total counts from fullrun_pn_xmm0502950101_pi300-10000_pass1_cl_src35_src.pi.gz = 323.00
[Sat Jun 15 21:25:32 2013] Total counts from fullrun_pn_xmm0502950101_pi300-10000_pass1_cl_src35_bgd.pi.gz = 2131.00
[Sat Jun 15 21:25:32 2013] Got source and background scale factors 1044886.000000, 8164826.000000
[Sat Jun 15 21:25:32 2013] User source parameters:
  Position = (266.9, 314.2) = 20 38 44.07 -1 23 41.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 50.3 +/- 19.0
  Background aperture counts = 272.7
  Rate = 0.001 +/- 0.0004

[Sat Jun 15 21:25:32 2013] Updating counts from extracted products
[Sat Jun 15 21:25:32 2013] Set source signif. to 50.29/16.51 = 3.05
[Sat Jun 15 21:25:37 2013] No arf file for this source, not re-computing flux
[Sat Jun 15 21:25:55 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 15 21:25:57 2013] xmm0502950101/analysis//spectral/fullrun_pn_xmm0502950101_pi300-10000_pass1_cl_src35_pl.csv not found, spectral fit skipped or did not complete