[Sat Jun 15 21:11:31 2013] Detection parameters:
  Position = (356.3, 354.2) = 20 38 18.13 -1 20 47.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 222.3 +/- 20.7
  Background counts = 50.1
  Rate = 0.007 +/- 0.0006

[Sat Jun 15 21:11:32 2013] Off-axis axis estimate = 5.82'
[Sat Jun 15 21:11:59 2013] Using EEF radius (= 9.34 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 21:11:59 2013] Initial guess for spatial extent in simple fitting = 9.34"
[Sat Jun 15 21:11:59 2013] source mask rpix=2.1, npix_max = 28, mask sum = 25, frac = 0.892
[Sat Jun 15 21:11:59 2013] Giving source the simple spatial ID 27 for pass 0, mean size = 9.34"
[Sat Jun 15 21:12:00 2013] fullrun_pn_xmm0502950101_pi300-10000_cl_pass0_src27.ximg exists
[Sat Jun 15 21:12:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502950101_pi300-10000_cl_pass0_src27.csv
[Sat Jun 15 21:12:00 2013] fullrun_pn_xmm0502950101_pi300-10000_cl_pass0_src27_1.ximg exists
[Sat Jun 15 21:12:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502950101_pi300-10000_cl_pass0_src27.csv
[Sat Jun 15 21:12:00 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502950101_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502950101_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 21:12:00 2013] fullrun_pn_xmm0502950101_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Sat Jun 15 21:12:00 2013] fullrun_pn_xmm0502950101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Sat Jun 15 21:12:00 2013] Fit fullrun_pn_xmm0502950101_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Sat Jun 15 21:12:15 2013] Spatial fit model total counts = 792.324000, observed total counts = 722.000000
[Sat Jun 15 21:12:15 2013] Offset between fit and detection position for source 28 = 0.174532 pixels
[Sat Jun 15 21:12:15 2013] Warning, changing simple spatial fit ID from 27 to 26
[Sat Jun 15 21:12:15 2013] 777.209000 total counts/ 648.709000 bgd. counts: snr = 5.045197
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.174532 pixels
  Position = (356.1, 354.2) = 20 38 18.18 -1 20 47.0
  Extent = 4.9 (4.1-5.6)", rotation angle = 0
  Source counts = 128.5 +/- 27.9
  Background counts = 648.7
  Rate = 0.003 +/- 0.0006
[Sat Jun 15 21:12:15 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 21:12:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 21:12:15 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 21:12:15 2013] Source does appear to be extended
[Sat Jun 15 21:12:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 21:12:15 2013] Source is confused with source 27
[Sat Jun 15 21:12:39 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 15 21:12:39 2013] Initial guess for spatial extent in simple fitting = 4.87"
[Sat Jun 15 21:12:39 2013] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.857
[Sat Jun 15 21:12:39 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 4.87"
[Sat Jun 15 21:12:39 2013] fullrun_pn_xmm0502950101_pi300-10000_cl_pass1_src27.ximg exists
[Sat Jun 15 21:12:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502950101_pi300-10000_cl_pass1_src27.csv
[Sat Jun 15 21:12:39 2013] fullrun_pn_xmm0502950101_pi300-10000_cl_pass1_src27_1.ximg exists
[Sat Jun 15 21:12:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502950101_pi300-10000_cl_pass1_src27.csv
[Sat Jun 15 21:12:39 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502950101_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502950101_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 21:12:40 2013] fullrun_pn_xmm0502950101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Sat Jun 15 21:12:40 2013] fullrun_pn_xmm0502950101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Sat Jun 15 21:12:40 2013] Fit fullrun_pn_xmm0502950101_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Sat Jun 15 21:12:54 2013] Spatial fit model total counts = 788.861000, observed total counts = 722.000000
[Sat Jun 15 21:12:54 2013] Offset between fit and detection position for source 28 = 0.022536 pixels
[Sat Jun 15 21:12:54 2013] Warning, changing simple spatial fit ID from 27 to 26
[Sat Jun 15 21:12:54 2013] 775.856000 total counts/ 648.995000 bgd. counts: snr = 4.979749
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.022536 pixels
  Position = (356.1, 354.2) = 20 38 18.18 -1 20 46.9
  Extent = 4.9 (4.0-5.8)", rotation angle = 0
  Source counts = 126.9 +/- 27.9
  Background counts = 649.0
  Rate = 0.003 +/- 0.0006
[Sat Jun 15 21:12:54 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 21:12:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 21:12:54 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 21:12:54 2013] Source does appear to be extended
[Sat Jun 15 21:12:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 21:13:18 2013] XMMSAS src. selection expression = ellipse(30935.806000, 30769.500000, 294.583808, 294.583808, 0.000000, X, Y)
[Sat Jun 15 21:13:18 2013] Not overwriting source region fullrun_pn_xmm0502950101_pi300-10000_pass1_cl_src28_src.reg
[Sat Jun 15 21:13:18 2013] Extracting stamp from image fullrun_pn_xmm0502950101_pi300-10000_cl_sm2.00.img.gz, (339, 337) - (373, 371)
[Sat Jun 15 21:13:18 2013] XMMSAS bgd. selection expression = annulus(30935.806000, 30769.500000, 490.973014, 981.946028, X, Y) && !ellipse(31175.202087, 31223.037750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31877.529022, 29619.877960, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 21:13:18 2013] Writing fullrun_pn_xmm0502950101_pi300-10000_pass1_cl_src28.gif
[Sat Jun 15 21:13:21 2013] ../../xmm0502950101/products/events/fullrun_pn_xmm0502950101_pi300-10000_pass1_cl_src28_src.evt and ../../xmm0502950101/products/events/fullrun_pn_xmm0502950101_pi300-10000_pass1_cl_src28_bgd.evt exist, delete to re-create
[Sat Jun 15 21:13:21 2013] Mean detx,y = (2336.51, -4625.67) 
[Sat Jun 15 21:13:21 2013] ../../xmm0502950101/products/images/fullrun_pn_xmm0502950101_pi300-10000_pass1_cl_src28_src.img and ../../xmm0502950101/products/images/fullrun_pn_xmm0502950101_pi300-10000_pass1_cl_src28_bgd.img exist, delete to re-create
[Sat Jun 15 21:13:21 2013] ../../xmm0502950101/products/spectra/fullrun_pn_xmm0502950101_pi300-10000_pass1_cl_src28_src.pi and ../../xmm0502950101/products/spectra/fullrun_pn_xmm0502950101_pi300-10000_pass1_cl_src28_bgd.pi exist, delete to re-create
[Sat Jun 15 21:13:21 2013] Setting source spectrum file to fullrun_pn_xmm0502950101_pi300-10000_pass1_cl_src28_src.pi.gz
[Sat Jun 15 21:13:21 2013] Setting bgd. spectrum file to fullrun_pn_xmm0502950101_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Sat Jun 15 21:13:21 2013] ../../xmm0502950101/products/lightcurves/fullrun_pn_xmm0502950101_pi300-10000_pass1_cl_src28_src.lc and ../../xmm0502950101/products/lightcurves/fullrun_pn_xmm0502950101_pi300-10000_pass1_cl_src28_bgd.lc exist, delete to re-create
[Sat Jun 15 21:25:30 2013] Updating aperture counts using extracted products
[Sat Jun 15 21:25:30 2013] Total counts from fullrun_pn_xmm0502950101_pi300-10000_pass1_cl_src28_src.pi.gz = 226.00
[Sat Jun 15 21:25:30 2013] Total counts from fullrun_pn_xmm0502950101_pi300-10000_pass1_cl_src28_bgd.pi.gz = 268.00
[Sat Jun 15 21:25:30 2013] Got source and background scale factors 273600.000000, 888825.000000
[Sat Jun 15 21:25:30 2013] User source parameters:
  Position = (356.1, 354.2) = 20 38 18.18 -1 20 46.9
  Extent = 4.9 (4.0-5.8)", rotation angle = 0
  Source aperture counts = 143.5 +/- 16.1
  Background aperture counts = 82.5
  Rate = 0.003 +/- 0.0003

[Sat Jun 15 21:25:37 2013] No arf file for this source, not re-computing flux
[Sat Jun 15 21:25:55 2013] Flag c found in src. 28 procflags, skipping spectral fitting
[Sat Jun 15 21:25:55 2013] Source 28 has no response, skipping
[Sat Jun 15 21:25:57 2013] xmm0502950101/analysis//spectral/fullrun_pn_xmm0502950101_pi300-10000_pass1_cl_src28_pl.csv not found, spectral fit skipped or did not complete