[Sat Jun 15 21:11:33 2013] Detection parameters:
  Position = (331.6, 391.5) = 20 38 25.30 -1 18 1.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 79.8 +/- 12.1
  Background counts = 19.8
  Rate = 0.002 +/- 0.0004

[Sat Jun 15 21:11:35 2013] Off-axis axis estimate = 7.16'
[Sat Jun 15 21:12:02 2013] Using EEF radius (= 10.01 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 21:12:02 2013] Initial guess for spatial extent in simple fitting = 10.01"
[Sat Jun 15 21:12:02 2013] source mask rpix=2.3, npix_max = 31, mask sum = 24, frac = 0.765
[Sat Jun 15 21:12:02 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 10.01"
[Sat Jun 15 21:12:03 2013] fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_src10.ximg exists
[Sat Jun 15 21:12:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_src10.csv
[Sat Jun 15 21:12:03 2013] fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_src10_1.ximg exists
[Sat Jun 15 21:12:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_src10.csv
[Sat Jun 15 21:12:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 21:12:03 2013] fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sat Jun 15 21:12:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sat Jun 15 21:12:03 2013] fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sat Jun 15 21:12:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sat Jun 15 21:12:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 21:12:26 2013] Warning, spatial fit 10 centroid is now closest to src. 4
[Sat Jun 15 21:12:26 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 21:12:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 21:12:26 2013] Assessing source extent using major
[Sat Jun 15 21:12:26 2013] Source does appear to be extended
[Sat Jun 15 21:12:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 21:12:42 2013] Using EEF radius (= 10.01 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 21:12:42 2013] Initial guess for spatial extent in simple fitting = 10.01"
[Sat Jun 15 21:12:42 2013] source mask rpix=2.3, npix_max = 31, mask sum = 24, frac = 0.765
[Sat Jun 15 21:12:42 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 10.01"
[Sat Jun 15 21:12:42 2013] fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_src10.ximg exists
[Sat Jun 15 21:12:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_src10.csv
[Sat Jun 15 21:12:42 2013] fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_src10_1.ximg exists
[Sat Jun 15 21:12:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_src10.csv
[Sat Jun 15 21:12:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 21:12:43 2013] fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sat Jun 15 21:12:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sat Jun 15 21:12:43 2013] fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sat Jun 15 21:12:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sat Jun 15 21:12:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 21:13:05 2013] Warning, spatial fit 10 centroid is now closest to src. 4
[Sat Jun 15 21:13:05 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 21:13:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 21:13:05 2013] Assessing source extent using major
[Sat Jun 15 21:13:05 2013] Source does appear to be extended
[Sat Jun 15 21:13:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 21:24:21 2013] XMMSAS src. selection expression = ellipse(28799.237610, 34011.211456, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 21:24:21 2013] Not overwriting source region fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src5_src.reg
[Sat Jun 15 21:24:21 2013] Extracting stamp from image fullrun_mos2_xmm0502950101_pi300-10000_cl_sm2.00.img.gz, (294, 354) - (369, 429)
[Sat Jun 15 21:24:21 2013] XMMSAS bgd. selection expression = annulus(28799.237610, 34011.211456, 1087.500000, 2175.000000, X, Y) && !ellipse(28567.389832, 35580.535553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31190.067596, 31149.084564, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 21:24:21 2013] Writing fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src5.gif
[Sat Jun 15 21:24:22 2013] ../../xmm0502950101/products/events/fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src5_src.evt and ../../xmm0502950101/products/events/fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src5_bgd.evt exist, delete to re-create
[Sat Jun 15 21:24:22 2013] Mean detx,y = (895.05, 6984.02) 
[Sat Jun 15 21:24:22 2013] ../../xmm0502950101/products/images/fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src5_src.img and ../../xmm0502950101/products/images/fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src5_bgd.img exist, delete to re-create
[Sat Jun 15 21:24:22 2013] ../../xmm0502950101/products/spectra/fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src5_src.pi and ../../xmm0502950101/products/spectra/fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src5_bgd.pi exist, delete to re-create
[Sat Jun 15 21:24:22 2013] Setting source spectrum file to fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src5_src.pi.gz
[Sat Jun 15 21:24:22 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sat Jun 15 21:24:22 2013] ../../xmm0502950101/products/lightcurves/fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src5_src.lc and ../../xmm0502950101/products/lightcurves/fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src5_bgd.lc exist, delete to re-create
[Sat Jun 15 21:24:30 2013] Not generating rmf since there are only 79 counts
[Sat Jun 15 21:24:30 2013] rmf not generated due to insufficient counts
[Sat Jun 15 21:25:45 2013] Updating aperture counts using extracted products
[Sat Jun 15 21:25:45 2013] Total counts from fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src5_src.pi.gz = 168.00
[Sat Jun 15 21:25:45 2013] Total counts from fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src5_bgd.pi.gz = 796.00
[Sat Jun 15 21:25:45 2013] Got source and background scale factors 1018692.000000, 7967651.000000
[Sat Jun 15 21:25:45 2013] User source parameters:
  Position = (331.6, 391.5) = 20 38 25.30 -1 18 1.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 66.2 +/- 14.0
  Background aperture counts = 101.8
  Rate = 0.001 +/- 0.0003

[Sat Jun 15 21:25:45 2013] Updating counts from extracted products
[Sat Jun 15 21:25:45 2013] Set source signif. to 66.23/10.09 = 6.56
[Sat Jun 15 21:25:51 2013] No arf file for this source, not re-computing flux
[Sat Jun 15 21:25:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 15 21:25:55 2013] xmm0502950101/analysis//spectral/fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete