[Sat Jun 15 21:11:34 2013] Detection parameters:
  Position = (393.2, 200.7) = 20 38 7.44 -1 31 54.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 48.8 +/- 10.3
  Background counts = 18.0
  Rate = 0.002 +/- 0.0004

[Sat Jun 15 21:11:35 2013] Off-axis axis estimate = 9.87'
[Sat Jun 15 21:12:02 2013] Using EEF radius (= 11.36 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 21:12:02 2013] Initial guess for spatial extent in simple fitting = 11.36"
[Sat Jun 15 21:12:02 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.929
[Sat Jun 15 21:12:02 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 11.36"
[Sat Jun 15 21:12:03 2013] fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_src19.ximg exists
[Sat Jun 15 21:12:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_src19.csv
[Sat Jun 15 21:12:03 2013] fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_src19_1.ximg exists
[Sat Jun 15 21:12:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_src19.csv
[Sat Jun 15 21:12:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 21:12:03 2013] fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sat Jun 15 21:12:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_tfrozen_src19.csv
[Sat Jun 15 21:12:03 2013] fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sat Jun 15 21:12:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_tfrozen_src19.csv
[Sat Jun 15 21:12:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 21:12:26 2013] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 36 at 14.845896 pixels away
[Sat Jun 15 21:12:26 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 21:12:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 21:12:26 2013] Assessing source extent using major
[Sat Jun 15 21:12:26 2013] Source does appear to be extended
[Sat Jun 15 21:12:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 21:12:42 2013] Using EEF radius (= 11.36 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 21:12:42 2013] Initial guess for spatial extent in simple fitting = 11.36"
[Sat Jun 15 21:12:42 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.929
[Sat Jun 15 21:12:42 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 11.36"
[Sat Jun 15 21:12:42 2013] fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_src19.ximg exists
[Sat Jun 15 21:12:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_src19.csv
[Sat Jun 15 21:12:42 2013] fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_src19_1.ximg exists
[Sat Jun 15 21:12:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_src19.csv
[Sat Jun 15 21:12:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 21:12:43 2013] fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Sat Jun 15 21:12:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_tfrozen_src19.csv
[Sat Jun 15 21:12:43 2013] fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Sat Jun 15 21:12:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_tfrozen_src19.csv
[Sat Jun 15 21:12:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 21:13:05 2013] Spatial fit model total counts = 248.779000, observed total counts = 208.000000
[Sat Jun 15 21:13:05 2013] Poor agreement between spatial fit and data for source 36
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 15 21:13:05 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 21:13:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 21:13:05 2013] Assessing source extent using major
[Sat Jun 15 21:13:05 2013] Source does appear to be extended
[Sat Jun 15 21:13:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 21:24:21 2013] XMMSAS src. selection expression = ellipse(34156.489349, 17416.100845, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 21:24:21 2013] Not overwriting source region fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src36_src.reg
[Sat Jun 15 21:24:21 2013] Extracting stamp from image fullrun_mos2_xmm0502950101_pi300-10000_cl_sm2.00.img.gz, (356, 163) - (431, 238)
[Sat Jun 15 21:24:21 2013] XMMSAS bgd. selection expression = annulus(34156.489349, 17416.100845, 1087.500000, 2175.000000, X, Y)
[Sat Jun 15 21:24:21 2013] Writing fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src36.gif
[Sat Jun 15 21:24:22 2013] ../../xmm0502950101/products/events/fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src36_src.evt and ../../xmm0502950101/products/events/fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src36_bgd.evt exist, delete to re-create
[Sat Jun 15 21:24:22 2013] Mean detx,y = (-9213.66, -7313.89) 
[Sat Jun 15 21:24:22 2013] ../../xmm0502950101/products/images/fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src36_src.img and ../../xmm0502950101/products/images/fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src36_bgd.img exist, delete to re-create
[Sat Jun 15 21:24:22 2013] ../../xmm0502950101/products/spectra/fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src36_src.pi and ../../xmm0502950101/products/spectra/fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src36_bgd.pi exist, delete to re-create
[Sat Jun 15 21:24:22 2013] Setting source spectrum file to fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src36_src.pi.gz
[Sat Jun 15 21:24:22 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Sat Jun 15 21:24:22 2013] ../../xmm0502950101/products/lightcurves/fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src36_src.lc and ../../xmm0502950101/products/lightcurves/fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src36_bgd.lc exist, delete to re-create
[Sat Jun 15 21:24:31 2013] Not generating rmf since there are only 48 counts
[Sat Jun 15 21:24:31 2013] rmf not generated due to insufficient counts
[Sat Jun 15 21:25:47 2013] Updating aperture counts using extracted products
[Sat Jun 15 21:25:47 2013] Total counts from fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src36_src.pi.gz = 148.00
[Sat Jun 15 21:25:47 2013] Total counts from fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src36_bgd.pi.gz = 948.00
[Sat Jun 15 21:25:47 2013] Got source and background scale factors 1215374.000000, 10596290.000000
[Sat Jun 15 21:25:47 2013] User source parameters:
  Position = (393.2, 200.7) = 20 38 7.44 -1 31 54.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 39.3 +/- 13.2
  Background aperture counts = 108.7
  Rate = 0.0007 +/- 0.0002

[Sat Jun 15 21:25:47 2013] Updating counts from extracted products
[Sat Jun 15 21:25:47 2013] Set source signif. to 39.27/10.43 = 3.77
[Sat Jun 15 21:25:51 2013] No arf file for this source, not re-computing flux
[Sat Jun 15 21:25:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 15 21:25:55 2013] xmm0502950101/analysis//spectral/fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src36_pl.csv not found, spectral fit skipped or did not complete