[Sat Jun 15 21:11:34 2013] Detection parameters:
  Position = (320.1, 244.2) = 20 38 28.64 -1 28 44.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 70.8 +/- 12.0
  Background counts = 20.9
  Rate = 0.002 +/- 0.0003

[Sat Jun 15 21:11:35 2013] Off-axis axis estimate = 4.24'
[Sat Jun 15 21:12:02 2013] Using EEF radius (= 8.55 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 21:12:02 2013] Initial guess for spatial extent in simple fitting = 8.55"
[Sat Jun 15 21:12:02 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.029
[Sat Jun 15 21:12:02 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 8.55"
[Sat Jun 15 21:12:03 2013] fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_src21.ximg exists
[Sat Jun 15 21:12:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_src21.csv
[Sat Jun 15 21:12:03 2013] fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_src21_1.ximg exists
[Sat Jun 15 21:12:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_src21.csv
[Sat Jun 15 21:12:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 21:12:03 2013] fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Sat Jun 15 21:12:03 2013] fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Sat Jun 15 21:12:03 2013] Fit fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Sat Jun 15 21:12:26 2013] Warning, spatial fit 21 centroid is now closest to src. 31
[Sat Jun 15 21:12:26 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 21:12:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 21:12:26 2013] Assessing source extent using major
[Sat Jun 15 21:12:26 2013] Source does appear to be extended
[Sat Jun 15 21:12:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 21:12:42 2013] Using EEF radius (= 8.55 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 21:12:42 2013] Initial guess for spatial extent in simple fitting = 8.55"
[Sat Jun 15 21:12:42 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.029
[Sat Jun 15 21:12:42 2013] Giving source the simple spatial ID 21 for pass 1, mean size = 8.55"
[Sat Jun 15 21:12:42 2013] fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_src21.ximg exists
[Sat Jun 15 21:12:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_src21.csv
[Sat Jun 15 21:12:42 2013] fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_src21_1.ximg exists
[Sat Jun 15 21:12:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_src21.csv
[Sat Jun 15 21:12:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 21:12:43 2013] fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Sat Jun 15 21:12:43 2013] fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Sat Jun 15 21:12:43 2013] Fit fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Sat Jun 15 21:13:05 2013] Spatial fit model total counts = 330.814000, observed total counts = 329.000000
[Sat Jun 15 21:13:05 2013] Offset between fit and detection position for source 30 = 0.170068 pixels
[Sat Jun 15 21:13:05 2013] 321.965600 total counts/ 285.376000 bgd. counts: snr = 2.165953
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.170068 pixels
  Position = (320.1, 244.3) = 20 38 28.62 -1 28 45.0
  Extent = 3.4 (2.4-4.9)", rotation angle = 0
  Source counts = 36.6 +/- 17.9
  Background counts = 285.4
  Rate = 0.0007 +/- 0.0003
[Sat Jun 15 21:13:05 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 21:13:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 21:13:05 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 21:13:05 2013] Source does appear to be extended
[Sat Jun 15 21:13:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 21:24:21 2013] XMMSAS src. selection expression = ellipse(27804.255740, 21207.386400, 206.461206, 206.461206, 0.000000, X, Y)
[Sat Jun 15 21:24:21 2013] Not overwriting source region fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src30_src.reg
[Sat Jun 15 21:24:21 2013] Extracting stamp from image fullrun_mos2_xmm0502950101_pi300-10000_cl_sm2.00.img.gz, (308, 232) - (332, 256)
[Sat Jun 15 21:24:21 2013] XMMSAS bgd. selection expression = annulus(27804.255740, 21207.386400, 344.102010, 688.204020, X, Y) && !ellipse(27701.157318, 20459.278168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29021.357361, 22559.703705, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 21:24:21 2013] Writing fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src30.gif
[Sat Jun 15 21:24:22 2013] ../../xmm0502950101/products/events/fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src30_src.evt and ../../xmm0502950101/products/events/fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src30_bgd.evt exist, delete to re-create
[Sat Jun 15 21:24:22 2013] Mean detx,y = (-2014.89, -5558.16) 
[Sat Jun 15 21:24:22 2013] ../../xmm0502950101/products/images/fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src30_src.img and ../../xmm0502950101/products/images/fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src30_bgd.img exist, delete to re-create
[Sat Jun 15 21:24:22 2013] ../../xmm0502950101/products/spectra/fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src30_src.pi and ../../xmm0502950101/products/spectra/fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src30_bgd.pi exist, delete to re-create
[Sat Jun 15 21:24:22 2013] Setting source spectrum file to fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src30_src.pi.gz
[Sat Jun 15 21:24:22 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Sat Jun 15 21:24:22 2013] ../../xmm0502950101/products/lightcurves/fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src30_src.lc and ../../xmm0502950101/products/lightcurves/fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src30_bgd.lc exist, delete to re-create
[Sat Jun 15 21:24:31 2013] Not generating rmf since there are only 36 counts
[Sat Jun 15 21:24:31 2013] rmf not generated due to insufficient counts
[Sat Jun 15 21:25:47 2013] Updating aperture counts using extracted products
[Sat Jun 15 21:25:47 2013] Total counts from fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src30_src.pi.gz = 57.00
[Sat Jun 15 21:25:48 2013] Total counts from fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src30_bgd.pi.gz = 79.00
[Sat Jun 15 21:25:48 2013] Got source and background scale factors 134400.000000, 601600.000000
[Sat Jun 15 21:25:48 2013] User source parameters:
  Position = (320.1, 244.3) = 20 38 28.62 -1 28 45.0
  Extent = 3.4 (2.4-4.9)", rotation angle = 0
  Source aperture counts = 39.4 +/- 8.6
  Background aperture counts = 17.6
  Rate = 0.0007 +/- 0.0002

[Sat Jun 15 21:25:51 2013] No arf file for this source, not re-computing flux
[Sat Jun 15 21:25:54 2013] Source 30 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun 15 21:25:55 2013] xmm0502950101/analysis//spectral/fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src30_pl.csv not found, spectral fit skipped or did not complete