[Sat Jun 15 21:11:34 2013] Detection parameters:
  Position = (298.0, 253.6) = 20 38 35.05 -1 28 5.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69.1 +/- 11.6
  Background counts = 21.1
  Rate = 0.002 +/- 0.0003

[Sat Jun 15 21:11:35 2013] Off-axis axis estimate = 3.25'
[Sat Jun 15 21:12:02 2013] Using EEF radius (= 8.05 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 21:12:02 2013] Initial guess for spatial extent in simple fitting = 8.05"
[Sat Jun 15 21:12:02 2013] source mask rpix=1.9, npix_max = 22, mask sum = 17, frac = 0.769
[Sat Jun 15 21:12:02 2013] Giving source the simple spatial ID 22 for pass 0, mean size = 8.05"
[Sat Jun 15 21:12:03 2013] fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_src22.ximg exists
[Sat Jun 15 21:12:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_src22.csv
[Sat Jun 15 21:12:03 2013] fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_src22_1.ximg exists
[Sat Jun 15 21:12:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_src22.csv
[Sat Jun 15 21:12:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 21:12:03 2013] fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Sat Jun 15 21:12:03 2013] fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Sat Jun 15 21:12:03 2013] Fit fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Sat Jun 15 21:12:26 2013] Spatial fit model total counts = 243.638000, observed total counts = 237.000000
[Sat Jun 15 21:12:26 2013] Offset between fit and detection position for source 28 = 0.300882 pixels
[Sat Jun 15 21:12:26 2013] 247.240800 total counts/ 198.211000 bgd. counts: snr = 3.482541
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.300882 pixels
  Position = (298.3, 253.6) = 20 38 34.97 -1 28 4.8
  Extent = 5.5 (4.1-7.7)", rotation angle = 0
  Source counts = 49.0 +/- 15.7
  Background counts = 198.2
  Rate = 0.0009 +/- 0.0003
[Sat Jun 15 21:12:26 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 21:12:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 21:12:26 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 21:12:26 2013] Source does appear to be extended
[Sat Jun 15 21:12:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 21:12:42 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 15 21:12:42 2013] Initial guess for spatial extent in simple fitting = 5.50"
[Sat Jun 15 21:12:42 2013] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.723
[Sat Jun 15 21:12:42 2013] Giving source the simple spatial ID 22 for pass 1, mean size = 5.50"
[Sat Jun 15 21:12:42 2013] fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_src22.ximg exists
[Sat Jun 15 21:12:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_src22.csv
[Sat Jun 15 21:12:42 2013] fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_src22_1.ximg exists
[Sat Jun 15 21:12:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_src22.csv
[Sat Jun 15 21:12:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 21:12:43 2013] fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Sat Jun 15 21:12:43 2013] fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Sat Jun 15 21:12:43 2013] Fit fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Sat Jun 15 21:13:05 2013] Warning, spatial fit 22 centroid is now closest to src. 20
[Sat Jun 15 21:13:05 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 21:13:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 21:13:05 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 21:13:05 2013] Source does appear to be extended
[Sat Jun 15 21:13:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 21:24:21 2013] XMMSAS src. selection expression = ellipse(25901.371000, 22011.799600, 330.033009, 330.033009, 0.000000, X, Y)
[Sat Jun 15 21:24:21 2013] Not overwriting source region fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src28_src.reg
[Sat Jun 15 21:24:21 2013] Extracting stamp from image fullrun_mos2_xmm0502950101_pi300-10000_cl_sm2.00.img.gz, (279, 235) - (317, 273)
[Sat Jun 15 21:24:21 2013] XMMSAS bgd. selection expression = annulus(25901.371000, 22011.799600, 550.055016, 1100.110032, X, Y) && !ellipse(27701.157318, 20459.278168, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 21:24:21 2013] Writing fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src28.gif
[Sat Jun 15 21:24:22 2013] ../../xmm0502950101/products/events/fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src28_src.evt and ../../xmm0502950101/products/events/fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src28_bgd.evt exist, delete to re-create
[Sat Jun 15 21:24:22 2013] Mean detx,y = (25.58, -5354.99) 
[Sat Jun 15 21:24:22 2013] ../../xmm0502950101/products/images/fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src28_src.img and ../../xmm0502950101/products/images/fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src28_bgd.img exist, delete to re-create
[Sat Jun 15 21:24:22 2013] ../../xmm0502950101/products/spectra/fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src28_src.pi and ../../xmm0502950101/products/spectra/fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src28_bgd.pi exist, delete to re-create
[Sat Jun 15 21:24:22 2013] Setting source spectrum file to fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src28_src.pi.gz
[Sat Jun 15 21:24:22 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Sat Jun 15 21:24:22 2013] ../../xmm0502950101/products/lightcurves/fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src28_src.lc and ../../xmm0502950101/products/lightcurves/fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src28_bgd.lc exist, delete to re-create
[Sat Jun 15 21:24:31 2013] Not generating rmf since there are only 49 counts
[Sat Jun 15 21:24:31 2013] rmf not generated due to insufficient counts
[Sat Jun 15 21:25:48 2013] Updating aperture counts using extracted products
[Sat Jun 15 21:25:48 2013] Total counts from fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src28_src.pi.gz = 79.00
[Sat Jun 15 21:25:48 2013] Total counts from fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src28_bgd.pi.gz = 254.00
[Sat Jun 15 21:25:48 2013] Got source and background scale factors 315296.000000, 2637688.000000
[Sat Jun 15 21:25:48 2013] User source parameters:
  Position = (298.3, 253.6) = 20 38 34.97 -1 28 4.8
  Extent = 5.5 (4.1-7.7)", rotation angle = 0
  Source aperture counts = 48.6 +/- 9.9
  Background aperture counts = 30.4
  Rate = 0.0009 +/- 0.0002

[Sat Jun 15 21:25:51 2013] No arf file for this source, not re-computing flux
[Sat Jun 15 21:25:54 2013] Source 28 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun 15 21:25:55 2013] xmm0502950101/analysis//spectral/fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src28_pl.csv not found, spectral fit skipped or did not complete