[Sat Jun 15 21:11:34 2013] Detection parameters:
  Position = (371.6, 286.3) = 20 38 13.69 -1 25 43.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 61.4 +/- 11.4
  Background counts = 20.1
  Rate = 0.001 +/- 0.0003

[Sat Jun 15 21:11:35 2013] Off-axis axis estimate = 5.38'
[Sat Jun 15 21:12:02 2013] Using EEF radius (= 9.12 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 21:12:02 2013] Initial guess for spatial extent in simple fitting = 9.12"
[Sat Jun 15 21:12:02 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.927
[Sat Jun 15 21:12:02 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 9.12"
[Sat Jun 15 21:12:03 2013] fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_src25.ximg exists
[Sat Jun 15 21:12:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_src25.csv
[Sat Jun 15 21:12:03 2013] fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_src25_1.ximg exists
[Sat Jun 15 21:12:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_src25.csv
[Sat Jun 15 21:12:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 21:12:03 2013] fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Sat Jun 15 21:12:03 2013] fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Sat Jun 15 21:12:03 2013] Fit fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Sat Jun 15 21:12:26 2013] Spatial fit model total counts = 249.000000, observed total counts = 249.000000
[Sat Jun 15 21:12:26 2013] Offset between fit and detection position for source 21 = 0.026805 pixels
[Sat Jun 15 21:12:26 2013] 246.360300 total counts/ 204.771000 bgd. counts: snr = 2.906346
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.026805 pixels
  Position = (371.6, 286.3) = 20 38 13.70 -1 25 42.4
  Extent = 5.0 (3.7-7.4)", rotation angle = 0
  Source counts = 41.6 +/- 15.7
  Background counts = 204.8
  Rate = 0.0008 +/- 0.0003
[Sat Jun 15 21:12:26 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 21:12:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 21:12:26 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 21:12:26 2013] Source does appear to be extended
[Sat Jun 15 21:12:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 21:12:42 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 15 21:12:42 2013] Initial guess for spatial extent in simple fitting = 5.02"
[Sat Jun 15 21:12:42 2013] source mask rpix=1.2, npix_max = 10, mask sum = 9, frac = 0.822
[Sat Jun 15 21:12:42 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 5.02"
[Sat Jun 15 21:12:42 2013] fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_src25.ximg exists
[Sat Jun 15 21:12:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_src25.csv
[Sat Jun 15 21:12:42 2013] fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_src25_1.ximg exists
[Sat Jun 15 21:12:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_src25.csv
[Sat Jun 15 21:12:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 21:12:43 2013] fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Sat Jun 15 21:12:43 2013] fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Sat Jun 15 21:12:43 2013] Fit fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Sat Jun 15 21:13:05 2013] Spatial fit model total counts = 249.000000, observed total counts = 249.000000
[Sat Jun 15 21:13:05 2013] Offset between fit and detection position for source 21 = 0.033419 pixels
[Sat Jun 15 21:13:05 2013] 248.142000 total counts/ 207.355000 bgd. counts: snr = 2.832465
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.033419 pixels
  Position = (371.6, 286.3) = 20 38 13.71 -1 25 42.5
  Extent = 4.9 (3.7-7.2)", rotation angle = 0
  Source counts = 40.8 +/- 15.8
  Background counts = 207.4
  Rate = 0.0008 +/- 0.0003
[Sat Jun 15 21:13:05 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 21:13:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 21:13:05 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 21:13:05 2013] Source does appear to be extended
[Sat Jun 15 21:13:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 21:24:21 2013] XMMSAS src. selection expression = ellipse(32277.868800, 24857.298400, 296.667609, 296.667609, 0.000000, X, Y)
[Sat Jun 15 21:24:21 2013] Not overwriting source region fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src21_src.reg
[Sat Jun 15 21:24:21 2013] Extracting stamp from image fullrun_mos2_xmm0502950101_pi300-10000_cl_sm2.00.img.gz, (355, 269) - (389, 303)
[Sat Jun 15 21:24:21 2013] XMMSAS bgd. selection expression = annulus(32277.868800, 24857.298400, 494.446014, 988.892028, X, Y)
[Sat Jun 15 21:24:21 2013] Writing fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src21.gif
[Sat Jun 15 21:24:22 2013] ../../xmm0502950101/products/events/fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src21_src.evt and ../../xmm0502950101/products/events/fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src21_bgd.evt exist, delete to re-create
[Sat Jun 15 21:24:22 2013] Mean detx,y = (-5198.46, -740.60) 
[Sat Jun 15 21:24:22 2013] ../../xmm0502950101/products/images/fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src21_src.img and ../../xmm0502950101/products/images/fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src21_bgd.img exist, delete to re-create
[Sat Jun 15 21:24:22 2013] ../../xmm0502950101/products/spectra/fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src21_src.pi and ../../xmm0502950101/products/spectra/fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src21_bgd.pi exist, delete to re-create
[Sat Jun 15 21:24:22 2013] Setting source spectrum file to fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src21_src.pi.gz
[Sat Jun 15 21:24:22 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Sat Jun 15 21:24:22 2013] ../../xmm0502950101/products/lightcurves/fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src21_src.lc and ../../xmm0502950101/products/lightcurves/fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src21_bgd.lc exist, delete to re-create
[Sat Jun 15 21:24:32 2013] Not generating rmf since there are only 40 counts
[Sat Jun 15 21:24:32 2013] rmf not generated due to insufficient counts
[Sat Jun 15 21:25:48 2013] Updating aperture counts using extracted products
[Sat Jun 15 21:25:48 2013] Total counts from fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src21_src.pi.gz = 70.00
[Sat Jun 15 21:25:48 2013] Total counts from fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src21_bgd.pi.gz = 255.00
[Sat Jun 15 21:25:48 2013] Got source and background scale factors 278400.000000, 2308800.000000
[Sat Jun 15 21:25:48 2013] User source parameters:
  Position = (371.6, 286.3) = 20 38 13.71 -1 25 42.5
  Extent = 4.9 (3.7-7.2)", rotation angle = 0
  Source aperture counts = 39.3 +/- 9.4
  Background aperture counts = 30.7
  Rate = 0.0007 +/- 0.0002

[Sat Jun 15 21:25:51 2013] No arf file for this source, not re-computing flux
[Sat Jun 15 21:25:54 2013] Source 21 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun 15 21:25:55 2013] xmm0502950101/analysis//spectral/fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete