[Sat Jun 15 21:11:34 2013] Detection parameters:
  Position = (313.3, 286.0) = 20 38 30.61 -1 25 46.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 44.5 +/- 10.3
  Background counts = 21.7
  Rate = 0.001 +/- 0.0002

[Sat Jun 15 21:11:35 2013] Off-axis axis estimate = 1.40'
[Sat Jun 15 21:12:02 2013] Using EEF radius (= 7.13 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 21:12:02 2013] Initial guess for spatial extent in simple fitting = 7.13"
[Sat Jun 15 21:12:02 2013] source mask rpix=1.6, npix_max = 18, mask sum = 13, frac = 0.710
[Sat Jun 15 21:12:02 2013] Giving source the simple spatial ID 33 for pass 0, mean size = 7.13"
[Sat Jun 15 21:12:03 2013] fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_src33.ximg exists
[Sat Jun 15 21:12:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_src33.csv
[Sat Jun 15 21:12:03 2013] fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_src33_1.ximg exists
[Sat Jun 15 21:12:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_src33.csv
[Sat Jun 15 21:12:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 21:12:03 2013] fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Sat Jun 15 21:12:03 2013] fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Sat Jun 15 21:12:03 2013] Fit fullrun_mos2_xmm0502950101_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Sat Jun 15 21:12:26 2013] Source 20 is offset by 4.791740 and -1.498268 pixels which is larger than
2 X fitted extent = 0.873021 x 0.873021, not incorporating fit results
[Sat Jun 15 21:12:26 2013] Source 20 is offset by 2.118345 and 0.091555 pixels which is larger than
2 X fitted extent = 1.908432 x 1.908432, not incorporating fit results
[Sat Jun 15 21:12:26 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 21:12:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 21:12:26 2013] Assessing source extent using major
[Sat Jun 15 21:12:26 2013] Source does appear to be extended
[Sat Jun 15 21:12:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 21:12:26 2013] Source is confused with source 19
[Sat Jun 15 21:12:42 2013] Using EEF radius (= 7.13 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 21:12:42 2013] Initial guess for spatial extent in simple fitting = 7.13"
[Sat Jun 15 21:12:42 2013] source mask rpix=1.6, npix_max = 18, mask sum = 13, frac = 0.710
[Sat Jun 15 21:12:42 2013] Giving source the simple spatial ID 32 for pass 1, mean size = 7.13"
[Sat Jun 15 21:12:42 2013] fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_src32.ximg exists
[Sat Jun 15 21:12:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_src32.csv
[Sat Jun 15 21:12:42 2013] fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_src32_1.ximg exists
[Sat Jun 15 21:12:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_src32.csv
[Sat Jun 15 21:12:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 21:12:43 2013] fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Sat Jun 15 21:12:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_tfrozen_src32.csv
[Sat Jun 15 21:12:43 2013] fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Sat Jun 15 21:12:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_tfrozen_src32.csv
[Sat Jun 15 21:12:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502950101_pi300-10000_cl_pass1_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 21:13:05 2013] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 33.770574 pixels away
[Sat Jun 15 21:13:05 2013] Source 20 is offset by 6.847556 and 4.176605 pixels which is larger than
2 X fitted extent = 6.557104 x 6.557104, not incorporating fit results
[Sat Jun 15 21:13:05 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 21:13:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 21:13:05 2013] Assessing source extent using major
[Sat Jun 15 21:13:05 2013] Source does appear to be extended
[Sat Jun 15 21:13:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 21:24:21 2013] XMMSAS src. selection expression = ellipse(27208.187408, 24833.956665, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 21:24:21 2013] Not overwriting source region fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src20_src.reg
[Sat Jun 15 21:24:21 2013] Extracting stamp from image fullrun_mos2_xmm0502950101_pi300-10000_cl_sm2.00.img.gz, (276, 249) - (351, 324)
[Sat Jun 15 21:24:22 2013] XMMSAS bgd. selection expression = annulus(27208.187408, 24833.956665, 1087.500000, 2175.000000, X, Y) && !ellipse(24803.862000, 24214.253000, 305.348009, 305.348009, 0.000000, X, Y) && !ellipse(29634.405040, 23229.556800, 401.998412, 401.998412, 0.000000, X, Y) && !ellipse(29021.357361, 22559.703705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27402.570600, 25545.528420, 785.014423, 785.014423, 0.000000, X, Y) && !ellipse(27965.149536, 25018.359070, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 21:24:22 2013] Writing fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src20.gif
[Sat Jun 15 21:24:23 2013] ../../xmm0502950101/products/events/fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src20_src.evt and ../../xmm0502950101/products/events/fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src20_bgd.evt exist, delete to re-create
[Sat Jun 15 21:24:23 2013] Mean detx,y = (-366.30, -2241.28) 
[Sat Jun 15 21:24:23 2013] ../../xmm0502950101/products/images/fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src20_src.img and ../../xmm0502950101/products/images/fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src20_bgd.img exist, delete to re-create
[Sat Jun 15 21:24:23 2013] ../../xmm0502950101/products/spectra/fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src20_src.pi and ../../xmm0502950101/products/spectra/fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src20_bgd.pi exist, delete to re-create
[Sat Jun 15 21:24:23 2013] Setting source spectrum file to fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src20_src.pi.gz
[Sat Jun 15 21:24:23 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Sat Jun 15 21:24:23 2013] ../../xmm0502950101/products/lightcurves/fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src20_src.lc and ../../xmm0502950101/products/lightcurves/fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src20_bgd.lc exist, delete to re-create
[Sat Jun 15 21:24:33 2013] Not generating rmf since there are only 44 counts
[Sat Jun 15 21:24:33 2013] rmf not generated due to insufficient counts
[Sat Jun 15 21:25:50 2013] Updating aperture counts using extracted products
[Sat Jun 15 21:25:50 2013] Total counts from fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src20_src.pi.gz = 286.00
[Sat Jun 15 21:25:50 2013] Total counts from fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src20_bgd.pi.gz = 1207.00
[Sat Jun 15 21:25:50 2013] Got source and background scale factors 1177168.000000, 9482720.000000
[Sat Jun 15 21:25:50 2013] User source parameters:
  Position = (313.3, 286.0) = 20 38 30.61 -1 25 46.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 136.2 +/- 17.9
  Background aperture counts = 149.8
  Rate = 0.003 +/- 0.0003

[Sat Jun 15 21:25:50 2013] Updating counts from extracted products
[Sat Jun 15 21:25:50 2013] Set source signif. to 136.17/12.24 = 11.12
[Sat Jun 15 21:25:51 2013] No arf file for this source, not re-computing flux
[Sat Jun 15 21:25:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 15 21:25:55 2013] xmm0502950101/analysis//spectral/fullrun_mos2_xmm0502950101_pi300-10000_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete