[Sat Jun 15 21:11:32 2013] Detection parameters:
  Position = (347.9, 329.9) = 20 38 20.56 -1 22 33.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 267.4 +/- 21.0
  Background counts = 20.3
  Rate = 0.005 +/- 0.0004

[Sat Jun 15 21:11:33 2013] Off-axis axis estimate = 4.25'
[Sat Jun 15 21:12:01 2013] Using EEF radius (= 8.55 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 21:12:01 2013] Initial guess for spatial extent in simple fitting = 8.55"
[Sat Jun 15 21:12:01 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.027
[Sat Jun 15 21:12:01 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 8.55"
[Sat Jun 15 21:12:01 2013] fullrun_mos1_xmm0502950101_pi300-10000_cl_pass0_src3.ximg exists
[Sat Jun 15 21:12:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502950101_pi300-10000_cl_pass0_src3.csv
[Sat Jun 15 21:12:01 2013] fullrun_mos1_xmm0502950101_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Jun 15 21:12:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502950101_pi300-10000_cl_pass0_src3.csv
[Sat Jun 15 21:12:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502950101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502950101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 21:12:02 2013] fullrun_mos1_xmm0502950101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Jun 15 21:12:02 2013] fullrun_mos1_xmm0502950101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Jun 15 21:12:02 2013] Fit fullrun_mos1_xmm0502950101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Jun 15 21:12:19 2013] Spatial fit model total counts = 416.350000, observed total counts = 417.000000
[Sat Jun 15 21:12:19 2013] Offset between fit and detection position for source 2 = 0.223828 pixels
[Sat Jun 15 21:12:19 2013] 423.009000 total counts/ 248.695000 bgd. counts: snr = 11.053473
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.223828 pixels
  Position = (347.7, 329.8) = 20 38 20.62 -1 22 33.3
  Extent = 4.8 (4.2-5.7)", rotation angle = 0
  Source counts = 174.3 +/- 20.6
  Background counts = 248.7
  Rate = 0.003 +/- 0.0004
[Sat Jun 15 21:12:19 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 21:12:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 21:12:19 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 21:12:19 2013] Source does appear to be extended
[Sat Jun 15 21:12:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 21:12:40 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 15 21:12:40 2013] Initial guess for spatial extent in simple fitting = 4.82"
[Sat Jun 15 21:12:40 2013] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.869
[Sat Jun 15 21:12:40 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 4.82"
[Sat Jun 15 21:12:41 2013] fullrun_mos1_xmm0502950101_pi300-10000_cl_pass1_src3.ximg exists
[Sat Jun 15 21:12:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502950101_pi300-10000_cl_pass1_src3.csv
[Sat Jun 15 21:12:41 2013] fullrun_mos1_xmm0502950101_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Jun 15 21:12:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502950101_pi300-10000_cl_pass1_src3.csv
[Sat Jun 15 21:12:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502950101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502950101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 21:12:41 2013] fullrun_mos1_xmm0502950101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Jun 15 21:12:41 2013] fullrun_mos1_xmm0502950101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Jun 15 21:12:41 2013] Fit fullrun_mos1_xmm0502950101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Jun 15 21:12:59 2013] Spatial fit model total counts = 421.954000, observed total counts = 420.000000
[Sat Jun 15 21:12:59 2013] Offset between fit and detection position for source 2 = 0.016696 pixels
[Sat Jun 15 21:12:59 2013] 424.706000 total counts/ 251.254000 bgd. counts: snr = 10.942658
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.016696 pixels
  Position = (347.7, 329.8) = 20 38 20.62 -1 22 33.2
  Extent = 4.8 (4.1-5.6)", rotation angle = 0
  Source counts = 173.5 +/- 20.6
  Background counts = 251.3
  Rate = 0.003 +/- 0.0004
[Sat Jun 15 21:12:59 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 21:12:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 21:12:59 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 21:12:59 2013] Source does appear to be extended
[Sat Jun 15 21:12:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 21:13:35 2013] XMMSAS src. selection expression = ellipse(30203.782800, 28642.927000, 290.077208, 290.077208, 0.000000, X, Y)
[Sat Jun 15 21:13:35 2013] Not overwriting source region fullrun_mos1_xmm0502950101_pi300-10000_pass1_cl_src2_src.reg
[Sat Jun 15 21:13:35 2013] Extracting stamp from image fullrun_mos1_xmm0502950101_pi300-10000_cl_sm2.00.img.gz, (331, 313) - (364, 346)
[Sat Jun 15 21:13:35 2013] XMMSAS bgd. selection expression = annulus(30203.782800, 28642.927000, 483.462014, 966.924028, X, Y)
[Sat Jun 15 21:13:35 2013] Writing fullrun_mos1_xmm0502950101_pi300-10000_pass1_cl_src2.gif
[Sat Jun 15 21:13:35 2013] ../../xmm0502950101/products/events/fullrun_mos1_xmm0502950101_pi300-10000_pass1_cl_src2_src.evt and ../../xmm0502950101/products/events/fullrun_mos1_xmm0502950101_pi300-10000_pass1_cl_src2_bgd.evt exist, delete to re-create
[Sat Jun 15 21:13:35 2013] Mean detx,y = (2462.09, 1928.41) 
[Sat Jun 15 21:13:37 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 21:13:44 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 21:13:44 2013] Setting source spectrum file to fullrun_mos1_xmm0502950101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jun 15 21:13:44 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0502950101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Jun 15 21:25:38 2013] Updating aperture counts using extracted products
[Sat Jun 15 21:25:38 2013] Total counts from fullrun_mos1_xmm0502950101_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 208.00
[Sat Jun 15 21:25:38 2013] Total counts from fullrun_mos1_xmm0502950101_pi300-10000_pass1_cl_src2_bgd.pi.gz = 230.00
[Sat Jun 15 21:25:38 2013] Got source and background scale factors 262400.000000, 2109412.000000
[Sat Jun 15 21:25:38 2013] User source parameters:
  Position = (347.7, 329.8) = 20 38 20.62 -1 22 33.2
  Extent = 4.8 (4.1-5.6)", rotation angle = 0
  Source aperture counts = 179.4 +/- 15.4
  Background aperture counts = 28.6
  Rate = 0.003 +/- 0.0003

[Sat Jun 15 21:25:43 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 21:25:43 2013] Using photon index=1.80, rate=0.00329, arf fullrun_mos1_xmm0502950101_pi300-10000_pass1_cl_src2.arf
[Sat Jun 15 21:25:43 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 21:25:43 2013] Updating source flux to 4.5e-14
[Sat Jun 15 21:25:54 2013] xmm0502950101/analysis//spectral/fullrun_mos1_xmm0502950101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete