[Sat Jun 15 21:11:32 2013] Detection parameters:
  Position = (355.9, 354.0) = 20 38 18.25 -1 20 47.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 95.6 +/- 13.3
  Background counts = 20.8
  Rate = 0.002 +/- 0.0003

[Sat Jun 15 21:11:33 2013] Off-axis axis estimate = 5.79'
[Sat Jun 15 21:12:01 2013] Using EEF radius (= 9.33 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 21:12:01 2013] Initial guess for spatial extent in simple fitting = 9.33"
[Sat Jun 15 21:12:01 2013] source mask rpix=2.1, npix_max = 27, mask sum = 34, frac = 1.216
[Sat Jun 15 21:12:01 2013] Giving source the simple spatial ID 12 for pass 0, mean size = 9.33"
[Sat Jun 15 21:12:01 2013] fullrun_mos1_xmm0502950101_pi300-10000_cl_pass0_src12.ximg exists
[Sat Jun 15 21:12:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502950101_pi300-10000_cl_pass0_src12.csv
[Sat Jun 15 21:12:01 2013] fullrun_mos1_xmm0502950101_pi300-10000_cl_pass0_src12_1.ximg exists
[Sat Jun 15 21:12:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502950101_pi300-10000_cl_pass0_src12.csv
[Sat Jun 15 21:12:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502950101_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502950101_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 21:12:02 2013] fullrun_mos1_xmm0502950101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Sat Jun 15 21:12:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502950101_pi300-10000_cl_pass0_tfrozen_src12.csv
[Sat Jun 15 21:12:02 2013] fullrun_mos1_xmm0502950101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Sat Jun 15 21:12:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502950101_pi300-10000_cl_pass0_tfrozen_src12.csv
[Sat Jun 15 21:12:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502950101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502950101_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 21:12:19 2013] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 12.123739 pixels away
[Sat Jun 15 21:12:19 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 21:12:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 21:12:19 2013] Assessing source extent using major
[Sat Jun 15 21:12:19 2013] Source does appear to be extended
[Sat Jun 15 21:12:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 21:12:40 2013] Using EEF radius (= 9.33 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 21:12:40 2013] Initial guess for spatial extent in simple fitting = 9.33"
[Sat Jun 15 21:12:40 2013] source mask rpix=2.1, npix_max = 27, mask sum = 34, frac = 1.216
[Sat Jun 15 21:12:40 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 9.33"
[Sat Jun 15 21:12:41 2013] fullrun_mos1_xmm0502950101_pi300-10000_cl_pass1_src12.ximg exists
[Sat Jun 15 21:12:41 2013] fullrun_mos1_xmm0502950101_pi300-10000_cl_pass1_src12_1.ximg exists
[Sat Jun 15 21:12:41 2013] Fit fullrun_mos1_xmm0502950101_pi300-10000_cl_pass1_src12 appears to have run properly
[Sat Jun 15 21:12:41 2013] fullrun_mos1_xmm0502950101_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Sat Jun 15 21:12:41 2013] fullrun_mos1_xmm0502950101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Sat Jun 15 21:12:42 2013] Fit fullrun_mos1_xmm0502950101_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Sat Jun 15 21:12:59 2013] Spatial fit model total counts = 353.991000, observed total counts = 334.000000
[Sat Jun 15 21:12:59 2013] Offset between fit and detection position for source 10 = 0.214382 pixels
[Sat Jun 15 21:12:59 2013] 361.914900 total counts/ 309.695000 bgd. counts: snr = 2.967351
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.214382 pixels
  Position = (355.7, 354.0) = 20 38 18.32 -1 20 47.8
  Extent = 3.9 (2.6-5.3)", rotation angle = 0
  Source counts = 52.2 +/- 19.0
  Background counts = 309.7
  Rate = 0.001 +/- 0.0004
[Sat Jun 15 21:12:59 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 21:12:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 21:12:59 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 21:12:59 2013] Source does appear to be extended
[Sat Jun 15 21:12:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 21:13:35 2013] XMMSAS src. selection expression = ellipse(30895.597600, 30751.750000, 232.824607, 232.824607, 0.000000, X, Y)
[Sat Jun 15 21:13:35 2013] Not overwriting source region fullrun_mos1_xmm0502950101_pi300-10000_pass1_cl_src10_src.reg
[Sat Jun 15 21:13:35 2013] Extracting stamp from image fullrun_mos1_xmm0502950101_pi300-10000_cl_sm2.00.img.gz, (342, 341) - (369, 367)
[Sat Jun 15 21:13:35 2013] XMMSAS bgd. selection expression = annulus(30895.597600, 30751.750000, 388.041011, 776.082022, X, Y)
[Sat Jun 15 21:13:35 2013] Writing fullrun_mos1_xmm0502950101_pi300-10000_pass1_cl_src10.gif
[Sat Jun 15 21:16:01 2013] Mean detx,y = (4682.85, 1962.51) 
[Sat Jun 15 21:16:02 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 21:16:08 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 21:16:08 2013] Setting source spectrum file to fullrun_mos1_xmm0502950101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sat Jun 15 21:16:08 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0502950101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sat Jun 15 21:23:08 2013] Not generating rmf since there are only 52 counts
[Sat Jun 15 21:23:08 2013] rmf not generated due to insufficient counts
[Sat Jun 15 21:25:40 2013] Updating aperture counts using extracted products
[Sat Jun 15 21:25:40 2013] Total counts from fullrun_mos1_xmm0502950101_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 81.00
[Sat Jun 15 21:25:40 2013] Total counts from fullrun_mos1_xmm0502950101_pi300-10000_pass1_cl_src10_bgd.pi.gz = 186.00
[Sat Jun 15 21:25:40 2013] Got source and background scale factors 168000.000000, 1290632.000000
[Sat Jun 15 21:25:40 2013] User source parameters:
  Position = (355.7, 354.0) = 20 38 18.32 -1 20 47.8
  Extent = 3.9 (2.6-5.3)", rotation angle = 0
  Source aperture counts = 56.8 +/- 10.0
  Background aperture counts = 24.2
  Rate = 0.001 +/- 0.0002

[Sat Jun 15 21:25:43 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 21:25:43 2013] Using photon index=1.80, rate=0.000989, arf fullrun_mos1_xmm0502950101_pi300-10000_pass1_cl_src10.arf
[Sat Jun 15 21:25:43 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 21:25:43 2013] Updating source flux to 1.8e-14
[Sat Jun 15 21:25:53 2013] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun 15 21:25:54 2013] xmm0502950101/analysis//spectral/fullrun_mos1_xmm0502950101_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete