[Sat Jun 15 21:11:32 2013] Detection parameters:
  Position = (453.5, 371.1) = 20 37 49.94 -1 19 33.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 131.2 +/- 15.3
  Background counts = 16.8
  Rate = 0.005 +/- 0.0006

[Sat Jun 15 21:11:33 2013] Off-axis axis estimate = 12.41'
[Sat Jun 15 21:12:01 2013] Using EEF radius (= 12.64 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 21:12:01 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 15 21:12:01 2013] Initial guess for spatial extent in simple fitting = 12.64"
[Sat Jun 15 21:12:01 2013] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.906
[Sat Jun 15 21:12:01 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 12.64"
[Sat Jun 15 21:12:01 2013] fullrun_mos1_xmm0502950101_pi300-10000_cl_pass0_src5.ximg exists
[Sat Jun 15 21:12:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502950101_pi300-10000_cl_pass0_src5.csv
[Sat Jun 15 21:12:01 2013] fullrun_mos1_xmm0502950101_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat Jun 15 21:12:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502950101_pi300-10000_cl_pass0_src5.csv
[Sat Jun 15 21:12:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502950101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502950101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 21:12:02 2013] fullrun_mos1_xmm0502950101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat Jun 15 21:12:02 2013] fullrun_mos1_xmm0502950101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Jun 15 21:12:02 2013] Fit fullrun_mos1_xmm0502950101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sat Jun 15 21:12:19 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.065346 pixels away
[Sat Jun 15 21:12:19 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 21:12:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 21:12:19 2013] Assessing source extent using major
[Sat Jun 15 21:12:19 2013] Source does appear to be extended
[Sat Jun 15 21:12:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 21:12:40 2013] Using EEF radius (= 12.64 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 21:12:40 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 15 21:12:40 2013] Initial guess for spatial extent in simple fitting = 12.64"
[Sat Jun 15 21:12:40 2013] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.906
[Sat Jun 15 21:12:40 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 12.64"
[Sat Jun 15 21:12:41 2013] fullrun_mos1_xmm0502950101_pi300-10000_cl_pass1_src5.ximg exists
[Sat Jun 15 21:12:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502950101_pi300-10000_cl_pass1_src5.csv
[Sat Jun 15 21:12:41 2013] fullrun_mos1_xmm0502950101_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat Jun 15 21:12:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502950101_pi300-10000_cl_pass1_src5.csv
[Sat Jun 15 21:12:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502950101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502950101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 21:12:41 2013] fullrun_mos1_xmm0502950101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat Jun 15 21:12:41 2013] fullrun_mos1_xmm0502950101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Jun 15 21:12:41 2013] Fit fullrun_mos1_xmm0502950101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sat Jun 15 21:12:59 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 16.159665 pixels away
[Sat Jun 15 21:12:59 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 21:12:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 21:12:59 2013] Assessing source extent using major
[Sat Jun 15 21:12:59 2013] Source does appear to be extended
[Sat Jun 15 21:12:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 21:13:35 2013] XMMSAS src. selection expression = ellipse(39405.251282, 32235.493347, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 21:13:35 2013] Not overwriting source region fullrun_mos1_xmm0502950101_pi300-10000_pass1_cl_src1_src.reg
[Sat Jun 15 21:13:35 2013] Extracting stamp from image fullrun_mos1_xmm0502950101_pi300-10000_cl_sm2.00.img.gz, (416, 334) - (491, 409)
[Sat Jun 15 21:13:35 2013] XMMSAS bgd. selection expression = annulus(39405.251282, 32235.493347, 1087.500000, 2175.000000, X, Y) && !ellipse(37464.285180, 31654.283400, 509.554314, 509.554314, 0.000000, X, Y)
[Sat Jun 15 21:13:35 2013] Writing fullrun_mos1_xmm0502950101_pi300-10000_pass1_cl_src1.gif
[Sat Jun 15 21:14:06 2013] Mean detx,y = (8597.22, 9627.59) 
[Sat Jun 15 21:14:07 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 21:14:15 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 21:14:15 2013] Setting source spectrum file to fullrun_mos1_xmm0502950101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun 15 21:14:15 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0502950101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jun 15 21:22:23 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 15 21:22:23 2013] rmf not generated due to insufficient counts
[Sat Jun 15 21:25:38 2013] Updating aperture counts using extracted products
[Sat Jun 15 21:25:38 2013] Total counts from fullrun_mos1_xmm0502950101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 254.00
[Sat Jun 15 21:25:38 2013] Total counts from fullrun_mos1_xmm0502950101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 956.00
[Sat Jun 15 21:25:38 2013] Got source and background scale factors 1332800.000000, 10299772.000000
[Sat Jun 15 21:25:38 2013] User source parameters:
  Position = (453.5, 371.1) = 20 37 49.94 -1 19 33.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 130.3 +/- 17.0
  Background aperture counts = 123.7
  Rate = 0.002 +/- 0.0003

[Sat Jun 15 21:25:38 2013] Updating counts from extracted products
[Sat Jun 15 21:25:38 2013] Set source signif. to 130.29/11.12 = 11.71
[Sat Jun 15 21:25:43 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 21:25:43 2013] Using photon index=1.80, rate=0.00247, arf fullrun_mos1_xmm0502950101_pi300-10000_pass1_cl_src1.arf
[Sat Jun 15 21:25:43 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 21:25:43 2013] Updating source flux to 5.2e-14
[Sat Jun 15 21:25:53 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 15 21:25:54 2013] xmm0502950101/analysis//spectral/fullrun_mos1_xmm0502950101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete