[Mon Nov 28 19:50:37 2011] Detection parameters:
  Position = (298.3, 322.0) = 9 47 12.71 76 23 14.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 22231.7 +/- 178.0
  Background counts = 46.8
  Rate = 1 +/- 0.009

[Mon Nov 28 19:50:39 2011] Off-axis axis estimate = 1.71'
[Mon Nov 28 19:56:06 2011] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 19:56:06 2011] Initial guess for spatial extent in simple fitting = 7.28"
[Mon Nov 28 19:56:06 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Mon Nov 28 19:56:06 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 7.28"
[Mon Nov 28 22:13:03 2011] fullrun_pn_xmm0502940301_pi300-10000_cl_pass0_src5.ximg exists
[Mon Nov 28 22:13:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502940301_pi300-10000_cl_pass0_src5.csv
[Mon Nov 28 22:13:03 2011] fullrun_pn_xmm0502940301_pi300-10000_cl_pass0_src5_1.ximg exists
[Mon Nov 28 22:13:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502940301_pi300-10000_cl_pass0_src5.csv
[Mon Nov 28 22:13:03 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502940301_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502940301_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 22:13:03 2011] fullrun_pn_xmm0502940301_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Mon Nov 28 22:13:03 2011] fullrun_pn_xmm0502940301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Mon Nov 28 22:13:03 2011] Fit fullrun_pn_xmm0502940301_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Mon Nov 28 23:37:47 2011] Spatial fit model total counts = 28861.100000, observed total counts = 28874.000000
[Mon Nov 28 23:37:47 2011] Offset between fit and detection position for source 5 = 0.089394 pixels
[Mon Nov 28 23:37:47 2011] 28897.500000 total counts/ 8336.500000 bgd. counts: snr = 225.191688
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.089394 pixels
  Position = (298.4, 321.9) = 9 47 12.61 76 23 13.7
  Extent = 10.5 (10.3-10.6)", rotation angle = 0
  Source counts = 20561.0 +/- 170.0
  Background counts = 8336.5
  Rate = 1 +/- 0.01
[Mon Nov 28 23:37:47 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 23:37:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 23:37:47 2011] Assessing source extent using major axis lower bound
[Mon Nov 28 23:37:47 2011] Source does appear to be extended
[Mon Nov 28 23:37:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 23:38:08 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Nov 28 23:38:08 2011] Initial guess for spatial extent in simple fitting = 10.46"
[Mon Nov 28 23:38:08 2011] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.067
[Mon Nov 28 23:38:08 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 10.46"
[Tue Nov 29 02:14:56 2011] fullrun_pn_xmm0502940301_pi300-10000_cl_pass1_src5.ximg exists
[Tue Nov 29 02:14:56 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502940301_pi300-10000_cl_pass1_src5.csv
[Tue Nov 29 02:14:56 2011] fullrun_pn_xmm0502940301_pi300-10000_cl_pass1_src5_1.ximg exists
[Tue Nov 29 02:14:56 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502940301_pi300-10000_cl_pass1_src5.csv
[Tue Nov 29 02:14:56 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502940301_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502940301_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 02:14:56 2011] fullrun_pn_xmm0502940301_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Tue Nov 29 02:14:56 2011] fullrun_pn_xmm0502940301_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Nov 29 02:14:56 2011] Fit fullrun_pn_xmm0502940301_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Tue Nov 29 03:13:50 2011] Spatial fit model total counts = 28725.900000, observed total counts = 28741.000000
[Tue Nov 29 03:13:50 2011] Offset between fit and detection position for source 5 = 0.089343 pixels
[Tue Nov 29 03:13:50 2011] 28672.120000 total counts/ 8243.620000 bgd. counts: snr = 224.997399
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.089343 pixels
  Position = (298.3, 322.0) = 9 47 12.65 76 23 14.1
  Extent = 10.4 (10.3-10.6)", rotation angle = 0
  Source counts = 20428.5 +/- 169.3
  Background counts = 8243.6
  Rate = 1 +/- 0.01
[Tue Nov 29 03:13:50 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 03:13:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 03:13:50 2011] Assessing source extent using major axis lower bound
[Tue Nov 29 03:13:50 2011] Source does appear to be extended
[Tue Nov 29 03:13:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 03:14:09 2011] Counts = 20428.500000, rescaling region sizes by 3.000000
[Tue Nov 29 03:14:09 2011] XMMSAS src. selection expression = ellipse(25904.969000, 27967.428200, 1880.460054, 1880.460054, 0.000000, X, Y)
[Tue Nov 29 03:14:09 2011] Writing source region out to fullrun_pn_xmm0502940301_pi300-10000_pass1_cl_src5_src.reg
[Tue Nov 29 03:14:09 2011] Extracting stamp from image fullrun_pn_xmm0502940301_pi300-10000_cl_sm2.00.img.gz, (190, 214) - (406, 430)
[Tue Nov 29 03:14:09 2011] XMMSAS bgd. selection expression = annulus(25904.969000, 27967.428200, 9402.300271, 18804.600541, X, Y) && !ellipse(15313.924200, 26106.232600, 502.687214, 502.687214, 0.000000, X, Y) && !ellipse(19375.247000, 24943.586000, 446.311676, 446.311676, 0.000000, X, Y) && !ellipse(31014.580780, 23894.588715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9941.113040, 22873.474600, 404.704012, 404.704012, 0.000000, X, Y) && !ellipse(18171.785904, 22576.637482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38403.190220, 19945.002880, 453.248013, 453.248013, 0.000000, X, Y) && !ellipse(25289.295800, 29044.569600, 694.873620, 694.873620, 0.000000, X, Y) && !ellipse(28698.670000, 32715.753000, 323.568809, 323.568809, 0.000000, X, Y) && !ellipse(12986.463242, 22390.772156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22177.925095, 17978.856873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28720.282349, 39296.883606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24384.642200, 43362.592800, 621.343548, 621.343548, 0.000000, X, Y) && !ellipse(21335.792200, 38776.129600, 382.656011, 237.065607, 135.681238, X, Y) && !ellipse(24808.922600, 37134.018200, 380.535211, 380.535211, 0.000000, X, Y) && !ellipse(28379.376000, 33727.108000, 1617.896047, 1488.704043, 63.199427, X, Y) && !ellipse(29182.791612, 30804.379200, 416.380012, 416.380012, 0.000000, X, Y) && !ellipse(25912.464000, 29908.968600, 1258.264036, 1258.264036, 0.000000, X, Y) && !ellipse(26790.246000, 28648.424000, 1265.008036, 1265.008036, 0.000000, X, Y) && !ellipse(20157.890600, 29328.471600, 439.523213, 252.373607, 101.040187, X, Y) && !ellipse(40534.205400, 29092.336500, 597.373617, 160.324005, 94.037457, X, Y) && !ellipse(24534.094000, 28524.822000, 593.016817, 593.016817, 0.000000, X, Y) && !ellipse(24091.921112, 28192.013824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27973.839447, 27450.642029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12951.597397, 27067.869110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33876.511200, 16456.569275, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27125.358459, 26059.411987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26724.425140, 26076.526306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37879.671448, 23392.992615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23363.281920, 22502.264400, 481.532591, 481.532591, 0.000000, X, Y) && !ellipse(30914.974000, 20961.760000, 1469.272042, 1469.272042, 0.000000, X, Y) && !ellipse(26131.626129, 21376.330597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28114.056200, 13132.745400, 682.351220, 373.789611, 0.496541, X, Y)
[Tue Nov 29 03:14:09 2011] Writing fullrun_pn_xmm0502940301_pi300-10000_pass1_cl_src5.gif
[Tue Nov 29 03:20:26 2011] Mean detx,y = (107.21, -172.31) 
[Tue Nov 29 03:20:39 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 03:41:47 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 03:41:48 2011] Setting source spectrum file to fullrun_pn_xmm0502940301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue Nov 29 03:41:48 2011] Setting bgd. spectrum file to fullrun_pn_xmm0502940301_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Tue Nov 29 10:07:18 2011] Updating aperture counts using extracted products
[Tue Nov 29 10:07:18 2011] Error reading totcts from fullrun_pn_xmm0502940301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue Nov 29 10:07:20 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 10:07:20 2011] Using photon index=1.80, rate=1.32, arf fullrun_pn_xmm0502940301_pi300-10000_pass1_cl_src5.arf
[Tue Nov 29 10:07:20 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 10:07:21 2011] Updating source flux to 2.9e-12