[Mon Nov 28 19:50:38 2011] Detection parameters:
  Position = (336.3, 354.6) = 9 46 25.72 76 25 36.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 110.3 +/- 14.6
  Background counts = 41.6
  Rate = 0.006 +/- 0.0008

[Mon Nov 28 19:50:39 2011] Off-axis axis estimate = 4.91'
[Mon Nov 28 19:56:06 2011] Using EEF radius (= 8.88 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 19:56:06 2011] Initial guess for spatial extent in simple fitting = 8.88"
[Mon Nov 28 19:56:06 2011] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.967
[Mon Nov 28 19:56:06 2011] Giving source the simple spatial ID 21 for pass 0, mean size = 8.88"
[Mon Nov 28 22:13:03 2011] fullrun_pn_xmm0502940301_pi300-10000_cl_pass0_src21.ximg exists
[Mon Nov 28 22:13:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502940301_pi300-10000_cl_pass0_src21.csv
[Mon Nov 28 22:13:03 2011] fullrun_pn_xmm0502940301_pi300-10000_cl_pass0_src21_1.ximg exists
[Mon Nov 28 22:13:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502940301_pi300-10000_cl_pass0_src21.csv
[Mon Nov 28 22:13:03 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502940301_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502940301_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 22:13:04 2011] fullrun_pn_xmm0502940301_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Mon Nov 28 22:13:04 2011] fullrun_pn_xmm0502940301_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Mon Nov 28 22:13:04 2011] Fit fullrun_pn_xmm0502940301_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Mon Nov 28 23:37:47 2011] Source 21 is offset by 6.213620 and -6.598622 pixels which is larger than
2 X fitted extent = 1.872143 x 1.872143, not incorporating fit results
[Mon Nov 28 23:37:47 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 23:37:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 23:37:47 2011] Assessing source extent using major
[Mon Nov 28 23:37:47 2011] Source does appear to be extended
[Mon Nov 28 23:37:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 23:38:08 2011] Using EEF radius (= 8.88 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 23:38:08 2011] Initial guess for spatial extent in simple fitting = 8.88"
[Mon Nov 28 23:38:08 2011] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.967
[Mon Nov 28 23:38:08 2011] Giving source the simple spatial ID 18 for pass 1, mean size = 8.88"
[Tue Nov 29 02:14:56 2011] fullrun_pn_xmm0502940301_pi300-10000_cl_pass1_src18.ximg exists
[Tue Nov 29 02:14:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502940301_pi300-10000_cl_pass1_src18.csv
[Tue Nov 29 02:14:56 2011] fullrun_pn_xmm0502940301_pi300-10000_cl_pass1_src18_1.ximg exists
[Tue Nov 29 02:14:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502940301_pi300-10000_cl_pass1_src18.csv
[Tue Nov 29 02:14:56 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502940301_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502940301_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 02:14:56 2011] fullrun_pn_xmm0502940301_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Tue Nov 29 02:14:56 2011] fullrun_pn_xmm0502940301_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Tue Nov 29 02:14:56 2011] Fit fullrun_pn_xmm0502940301_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Tue Nov 29 03:13:50 2011] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 17.944564 pixels away
[Tue Nov 29 03:13:50 2011] Spatial fit model total counts = 291.831000, observed total counts = 292.000000
[Tue Nov 29 03:13:50 2011] Offset between fit and detection position for source 21 = 0.301709 pixels
[Tue Nov 29 03:13:50 2011] 286.126200 total counts/ 197.155000 bgd. counts: snr = 6.336443
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.301709 pixels
  Position = (336.0, 354.6) = 9 46 26.09 76 25 35.7
  Extent = 5.2 (4.3-6.5)", rotation angle = 0
  Source counts = 89.0 +/- 16.9
  Background counts = 197.2
  Rate = 0.006 +/- 0.001
[Tue Nov 29 03:13:50 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 03:13:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 03:13:50 2011] Assessing source extent using major axis lower bound
[Tue Nov 29 03:13:50 2011] Source does appear to be extended
[Tue Nov 29 03:13:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 03:14:10 2011] XMMSAS src. selection expression = ellipse(29182.791612, 30804.379200, 312.285009, 312.285009, 0.000000, X, Y)
[Tue Nov 29 03:14:10 2011] Writing source region out to fullrun_pn_xmm0502940301_pi300-10000_pass1_cl_src21_src.reg
[Tue Nov 29 03:14:10 2011] Extracting stamp from image fullrun_pn_xmm0502940301_pi300-10000_cl_sm2.00.img.gz, (318, 337) - (354, 373)
[Tue Nov 29 03:14:10 2011] XMMSAS bgd. selection expression = annulus(29182.791612, 30804.379200, 520.475015, 1040.950030, X, Y) && !ellipse(25904.969000, 27967.428200, 2507.280072, 2507.280072, 0.000000, X, Y)
[Tue Nov 29 03:14:10 2011] Writing fullrun_pn_xmm0502940301_pi300-10000_pass1_cl_src21.gif
[Tue Nov 29 03:55:31 2011] Mean detx,y = (4379.23, -697.07) 
[Tue Nov 29 03:55:37 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 03:56:10 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 03:56:11 2011] Setting source spectrum file to fullrun_pn_xmm0502940301_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Tue Nov 29 03:56:11 2011] Setting bgd. spectrum file to fullrun_pn_xmm0502940301_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Tue Nov 29 07:53:22 2011] Not generating rmf since there are only 88 counts
[Tue Nov 29 07:53:22 2011] rmf not generated due to insufficient counts
[Tue Nov 29 10:07:19 2011] Updating aperture counts using extracted products
[Tue Nov 29 10:07:19 2011] Error reading totcts from fullrun_pn_xmm0502940301_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Tue Nov 29 10:07:21 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 10:07:21 2011] Using photon index=1.80, rate=0.00576, arf fullrun_pn_xmm0502940301_pi300-10000_pass1_cl_src21.arf
[Tue Nov 29 10:07:21 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 10:07:21 2011] Updating source flux to 2.1e-14
[Tue Nov 29 10:08:36 2011] Flag b found in src. 21 procflags, skipping spectral fitting
[Tue Nov 29 10:08:36 2011] Source 21 has fewer than 100.000000 counts, skipping spectral fitting