[Mon Nov 28 19:50:37 2011] Detection parameters:
  Position = (176.4, 300.8) = 9 49 42.53 76 21 38.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1830.4 +/- 52.0
  Background counts = 31.4
  Rate = 0.07 +/- 0.002

[Mon Nov 28 19:50:39 2011] Off-axis axis estimate = 8.85'
[Mon Nov 28 19:56:06 2011] Using EEF radius (= 10.85 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 19:56:06 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Nov 28 19:56:06 2011] Initial guess for spatial extent in simple fitting = 10.85"
[Mon Nov 28 19:56:06 2011] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.004
[Mon Nov 28 19:56:06 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 10.85"
[Mon Nov 28 22:13:03 2011] fullrun_pn_xmm0502940301_pi300-10000_cl_pass0_src1.ximg exists
[Mon Nov 28 22:13:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502940301_pi300-10000_cl_pass0_src1.csv
[Mon Nov 28 22:13:03 2011] fullrun_pn_xmm0502940301_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Nov 28 22:13:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502940301_pi300-10000_cl_pass0_src1.csv
[Mon Nov 28 22:13:03 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502940301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502940301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 22:13:03 2011] fullrun_pn_xmm0502940301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Nov 28 22:13:03 2011] fullrun_pn_xmm0502940301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Nov 28 22:13:03 2011] Fit fullrun_pn_xmm0502940301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Nov 28 23:37:47 2011] Source 1 is offset by -9.541403 and 0.974611 pixels which is larger than
2 X fitted extent = 1.247343 x 1.247343, not incorporating fit results
[Mon Nov 28 23:37:47 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 23:37:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 23:37:47 2011] Assessing source extent using major
[Mon Nov 28 23:37:47 2011] Source does appear to be extended
[Mon Nov 28 23:37:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 23:38:08 2011] Using EEF radius (= 10.85 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 23:38:08 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Nov 28 23:38:08 2011] Initial guess for spatial extent in simple fitting = 10.85"
[Mon Nov 28 23:38:08 2011] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.004
[Mon Nov 28 23:38:08 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 10.85"
[Tue Nov 29 02:14:56 2011] fullrun_pn_xmm0502940301_pi300-10000_cl_pass1_src1.ximg exists
[Tue Nov 29 02:14:56 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502940301_pi300-10000_cl_pass1_src1.csv
[Tue Nov 29 02:14:56 2011] fullrun_pn_xmm0502940301_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Nov 29 02:14:56 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502940301_pi300-10000_cl_pass1_src1.csv
[Tue Nov 29 02:14:56 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502940301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502940301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 02:14:56 2011] fullrun_pn_xmm0502940301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Nov 29 02:14:56 2011] fullrun_pn_xmm0502940301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Nov 29 02:14:56 2011] Fit fullrun_pn_xmm0502940301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Nov 29 03:13:50 2011] Spatial fit model total counts = 1864.590000, observed total counts = 1868.000000
[Tue Nov 29 03:13:50 2011] Offset between fit and detection position for source 1 = 0.225192 pixels
[Tue Nov 29 03:13:50 2011] 1882.807000 total counts/ 620.427000 bgd. counts: snr = 50.680952
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.225192 pixels
  Position = (176.6, 300.6) = 9 49 42.36 76 21 38.2
  Extent = 6.3 (6.0-6.6)", rotation angle = 0
  Source counts = 1262.4 +/- 43.4
  Background counts = 620.4
  Rate = 0.08 +/- 0.003
[Tue Nov 29 03:13:50 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 03:13:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 03:13:50 2011] Assessing source extent using major axis lower bound
[Tue Nov 29 03:13:50 2011] Source does appear to be extended
[Tue Nov 29 03:13:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 03:14:09 2011] Counts = 1262.380000, rescaling region sizes by 2.000000
[Tue Nov 29 03:14:09 2011] XMMSAS src. selection expression = ellipse(15313.924200, 26106.232600, 754.030822, 754.030822, 0.000000, X, Y)
[Tue Nov 29 03:14:09 2011] Writing source region out to fullrun_pn_xmm0502940301_pi300-10000_pass1_cl_src1_src.reg
[Tue Nov 29 03:14:09 2011] Extracting stamp from image fullrun_pn_xmm0502940301_pi300-10000_cl_sm2.00.img.gz, (133, 257) - (220, 344)
[Tue Nov 29 03:14:09 2011] XMMSAS bgd. selection expression = annulus(15313.924200, 26106.232600, 2513.436072, 5026.872145, X, Y) && !ellipse(19375.247000, 24943.586000, 446.311676, 446.311676, 0.000000, X, Y) && !ellipse(9941.113040, 22873.474600, 404.704012, 404.704012, 0.000000, X, Y) && !ellipse(18171.785904, 22576.637482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12986.463242, 22390.772156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20157.890600, 29328.471600, 439.523213, 252.373607, 101.040187, X, Y) && !ellipse(12951.597397, 27067.869110, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Nov 29 03:14:09 2011] Writing fullrun_pn_xmm0502940301_pi300-10000_pass1_cl_src1.gif
[Tue Nov 29 03:14:33 2011] Mean detx,y = (-9680.76, -4693.72) 
[Tue Nov 29 03:14:40 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 03:16:38 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 03:16:39 2011] Setting source spectrum file to fullrun_pn_xmm0502940301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Nov 29 03:16:39 2011] Setting bgd. spectrum file to fullrun_pn_xmm0502940301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Nov 29 10:07:17 2011] Updating aperture counts using extracted products
[Tue Nov 29 10:07:17 2011] Error reading totcts from fullrun_pn_xmm0502940301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Nov 29 10:07:20 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 10:07:20 2011] Using photon index=1.80, rate=0.0818, arf fullrun_pn_xmm0502940301_pi300-10000_pass1_cl_src1.arf
[Tue Nov 29 10:07:20 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 10:07:20 2011] Updating source flux to 4.1e-13
[Tue Nov 29 10:08:36 2011] Flag b found in src. 1 procflags, skipping spectral fitting
[Tue Nov 29 10:10:24 2011] Reading fit data from xmm0502940301/analysis//spectral/fullrun_pn_xmm0502940301_pi300-10000_pass1_cl_src1_pl.csv
[Tue Nov 29 10:10:24 2011] Spectral fit parameter nH value = 1.01278e+20
[Tue Nov 29 10:10:24 2011] Spectral fit parameter PhoIndex value = 2.06396
[Tue Nov 29 10:10:24 2011] Failed to get F(0.3-8.0) from xmm0502940301/analysis//spectral/fullrun_pn_xmm0502940301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Nov 29 10:10:24 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 10:10:24 2011] Using Nh = 1e+20, photon index=2.06, rate=0.0818, arf fullrun_pn_xmm0502940301_pi300-10000_pass1_cl_src1.arf
[Tue Nov 29 10:10:24 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 10:10:24 2011] Updating source flux to 3.5e-13