[Mon Nov 28 19:51:55 2011] Detection parameters:
  Position = (306.0, 329.3) = 9 47 3.18 76 23 43.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 328.9 +/- 26.5
  Background counts = 55.4
  Rate = 0.01 +/- 0.001

[Mon Nov 28 19:51:55 2011] Off-axis axis estimate = 2.30'
[Mon Nov 28 22:50:06 2011] Using EEF radius (= 7.58 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 22:50:06 2011] Initial guess for spatial extent in simple fitting = 7.58"
[Mon Nov 28 22:50:06 2011] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.796
[Mon Nov 28 22:50:06 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 7.58"
[Mon Nov 28 23:37:34 2011] fullrun_mos2_xmm0502940301_pi300-10000_cl_pass0_src3.ximg exists
[Mon Nov 28 23:37:34 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0502940301_pi300-10000_cl_pass0_src3.csv
[Mon Nov 28 23:37:34 2011] fullrun_mos2_xmm0502940301_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Nov 28 23:37:34 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0502940301_pi300-10000_cl_pass0_src3.csv
[Mon Nov 28 23:37:34 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502940301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502940301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 23:37:34 2011] fullrun_mos2_xmm0502940301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Nov 28 23:37:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502940301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon Nov 28 23:37:34 2011] fullrun_mos2_xmm0502940301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Nov 28 23:37:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502940301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon Nov 28 23:37:34 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502940301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502940301_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 23:37:55 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 16.824202 pixels away
[Mon Nov 28 23:37:55 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 23:37:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 23:37:55 2011] Assessing source extent using major
[Mon Nov 28 23:37:55 2011] Source does appear to be extended
[Mon Nov 28 23:37:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 02:39:59 2011] Using EEF radius (= 7.58 ")to estimate initial spatial extent for simple fitting
[Tue Nov 29 02:39:59 2011] Initial guess for spatial extent in simple fitting = 7.58"
[Tue Nov 29 02:39:59 2011] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.796
[Tue Nov 29 02:39:59 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 7.58"
[Tue Nov 29 03:13:38 2011] fullrun_mos2_xmm0502940301_pi300-10000_cl_pass1_src3.ximg exists
[Tue Nov 29 03:13:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502940301_pi300-10000_cl_pass1_src3.csv
[Tue Nov 29 03:13:38 2011] fullrun_mos2_xmm0502940301_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Nov 29 03:13:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502940301_pi300-10000_cl_pass1_src3.csv
[Tue Nov 29 03:13:38 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502940301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502940301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 03:13:38 2011] fullrun_mos2_xmm0502940301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Nov 29 03:13:38 2011] fullrun_mos2_xmm0502940301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Nov 29 03:13:38 2011] Fit fullrun_mos2_xmm0502940301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Nov 29 03:13:56 2011] Source 3 is offset by 6.958691 and 6.239788 pixels which is larger than
2 X fitted extent = 3.984281 x 3.984281, not incorporating fit results
[Tue Nov 29 03:13:56 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 03:13:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 03:13:56 2011] Assessing source extent using major
[Tue Nov 29 03:13:56 2011] Source does appear to be extended
[Tue Nov 29 03:13:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 09:29:49 2011] XMMSAS src. selection expression = ellipse(26572.560120, 28598.015594, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Nov 29 09:29:49 2011] Writing source region out to fullrun_mos2_xmm0502940301_pi300-10000_pass1_cl_src3_src.reg
[Tue Nov 29 09:29:49 2011] Extracting stamp from image fullrun_mos2_xmm0502940301_pi300-10000_cl_sm2.00.img.gz, (268, 292) - (343, 367)
[Tue Nov 29 09:29:49 2011] XMMSAS bgd. selection expression = annulus(26572.560120, 28598.015594, 1087.500000, 2175.000000, X, Y) && !ellipse(25900.373400, 27944.940600, 927.960027, 805.824023, -0.000000, X, Y) && !ellipse(27800.726227, 28389.688721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27985.092000, 26977.636000, 1170.536034, 1170.536034, 0.000000, X, Y)
[Tue Nov 29 09:29:49 2011] Writing fullrun_mos2_xmm0502940301_pi300-10000_pass1_cl_src3.gif
[Tue Nov 29 09:36:50 2011] Mean detx,y = (-590.65, 151.33) 
[Tue Nov 29 09:36:53 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 09:37:10 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 09:37:10 2011] Setting source spectrum file to fullrun_mos2_xmm0502940301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Nov 29 09:37:10 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0502940301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Nov 29 09:47:31 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Nov 29 09:47:31 2011] rmf not generated due to insufficient counts
[Tue Nov 29 10:07:23 2011] Updating aperture counts using extracted products
[Tue Nov 29 10:07:23 2011] Error reading totcts from fullrun_mos2_xmm0502940301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Nov 29 10:07:24 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 10:07:24 2011] Using photon index=1.80, rate=0.0133, arf fullrun_mos2_xmm0502940301_pi300-10000_pass1_cl_src3.arf
[Tue Nov 29 10:07:24 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 10:07:24 2011] Updating source flux to 1.2e-13
[Tue Nov 29 10:07:59 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting