[Mon Nov 28 19:51:55 2011] Detection parameters:
  Position = (298.4, 321.9) = 9 47 12.53 76 23 13.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 9422.2 +/- 116.5
  Background counts = 55.3
  Rate = 0.4 +/- 0.004

[Mon Nov 28 19:51:55 2011] Off-axis axis estimate = 1.70'
[Mon Nov 28 22:50:06 2011] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 22:50:06 2011] Initial guess for spatial extent in simple fitting = 7.28"
[Mon Nov 28 22:50:06 2011] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.058
[Mon Nov 28 22:50:06 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Mon Nov 28 23:37:34 2011] fullrun_mos2_xmm0502940301_pi300-10000_cl_pass0_src1.ximg exists
[Mon Nov 28 23:37:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502940301_pi300-10000_cl_pass0_src1.csv
[Mon Nov 28 23:37:34 2011] fullrun_mos2_xmm0502940301_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Nov 28 23:37:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502940301_pi300-10000_cl_pass0_src1.csv
[Mon Nov 28 23:37:34 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502940301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502940301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 23:37:34 2011] fullrun_mos2_xmm0502940301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Nov 28 23:37:34 2011] fullrun_mos2_xmm0502940301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Nov 28 23:37:34 2011] Fit fullrun_mos2_xmm0502940301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Nov 28 23:37:55 2011] Spatial fit model total counts = 11108.000000, observed total counts = 11104.000000
[Mon Nov 28 23:37:55 2011] Offset between fit and detection position for source 2 = 0.103144 pixels
[Mon Nov 28 23:37:55 2011] 11014.460000 total counts/ 3046.350000 bgd. counts: snr = 144.366166
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.103144 pixels
  Position = (298.4, 321.8) = 9 47 12.60 76 23 13.2
  Extent = 10.3 (10.0-10.5)", rotation angle = 0
  Source counts = 7968.1 +/- 104.9
  Background counts = 3046.3
  Rate = 0.4 +/- 0.006
[Mon Nov 28 23:37:55 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 23:37:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 23:37:55 2011] Assessing source extent using major axis lower bound
[Mon Nov 28 23:37:55 2011] Source does appear to be extended
[Mon Nov 28 23:37:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 02:39:59 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Nov 29 02:39:59 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Nov 29 02:39:59 2011] Initial guess for spatial extent in simple fitting = 10.26"
[Tue Nov 29 02:39:59 2011] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.102
[Tue Nov 29 02:39:59 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 10.26"
[Tue Nov 29 03:13:38 2011] fullrun_mos2_xmm0502940301_pi300-10000_cl_pass1_src1.ximg exists
[Tue Nov 29 03:13:38 2011] fullrun_mos2_xmm0502940301_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Nov 29 03:13:38 2011] Fit fullrun_mos2_xmm0502940301_pi300-10000_cl_pass1_src1 appears to have run properly
[Tue Nov 29 03:13:38 2011] fullrun_mos2_xmm0502940301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Nov 29 03:13:38 2011] fullrun_mos2_xmm0502940301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Nov 29 03:13:38 2011] Fit fullrun_mos2_xmm0502940301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Nov 29 03:13:56 2011] Spatial fit model total counts = 11958.200000, observed total counts = 11985.000000
[Tue Nov 29 03:13:56 2011] Offset between fit and detection position for source 2 = 0.109399 pixels
[Tue Nov 29 03:13:56 2011] 11921.000000 total counts/ 3409.060000 bgd. counts: snr = 145.784460
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.109399 pixels
  Position = (298.3, 321.8) = 9 47 12.71 76 23 13.0
  Extent = 11.6" x 10.1", rotation angle = -0
  Source counts = 8511.9 +/- 109.2
  Background counts = 3409.1
  Rate = 0.5 +/- 0.006
[Tue Nov 29 03:13:56 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 03:13:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 03:13:56 2011] Assessing source extent using major
[Tue Nov 29 03:13:56 2011] Source does appear to be extended
[Tue Nov 29 03:13:56 2011] Computing asymmetry using major and minor axis, asym = 1.15
[Tue Nov 29 09:29:49 2011] Counts = 8511.940000, rescaling region sizes by 2.000000
[Tue Nov 29 09:29:49 2011] XMMSAS src. selection expression = ellipse(25900.373400, 27944.940600, 1391.940040, 1208.736035, -0.000000, X, Y)
[Tue Nov 29 09:29:49 2011] Writing source region out to fullrun_mos2_xmm0502940301_pi300-10000_pass1_cl_src2_src.reg
[Tue Nov 29 09:29:49 2011] Extracting stamp from image fullrun_mos2_xmm0502940301_pi300-10000_cl_sm2.00.img.gz, (218, 242) - (378, 402)
[Tue Nov 29 09:29:49 2011] XMMSAS bgd. selection expression = annulus(25900.373400, 27944.940600, 4639.800134, 9279.600267, X, Y) && !ellipse(26572.560120, 28598.015594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31029.822400, 23923.280000, 530.752015, 530.752015, 0.000000, X, Y) && !ellipse(28722.419647, 32688.534271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27800.726227, 28389.688721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27985.092000, 26977.636000, 1170.536034, 1170.536034, 0.000000, X, Y)
[Tue Nov 29 09:29:49 2011] Writing fullrun_mos2_xmm0502940301_pi300-10000_pass1_cl_src2.gif
[Tue Nov 29 09:29:56 2011] Mean detx,y = (85.96, 59.65) 
[Tue Nov 29 09:29:59 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 09:36:12 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 09:36:12 2011] Setting source spectrum file to fullrun_mos2_xmm0502940301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Nov 29 09:36:12 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0502940301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Nov 29 10:07:23 2011] Updating aperture counts using extracted products
[Tue Nov 29 10:07:23 2011] Error reading totcts from fullrun_mos2_xmm0502940301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Nov 29 10:07:24 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 10:07:24 2011] Using photon index=1.80, rate=0.47, arf fullrun_mos2_xmm0502940301_pi300-10000_pass1_cl_src2.arf
[Tue Nov 29 10:07:24 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 10:07:24 2011] Updating source flux to 4.4e-12
[Tue Nov 29 10:08:36 2011] Reading fit data from xmm0502940301/analysis//spectral/fullrun_mos2_xmm0502940301_pi300-10000_pass1_cl_src2_pl.csv
[Tue Nov 29 10:08:36 2011] Spectral fit parameter nH value = 9.55364e+20
[Tue Nov 29 10:08:36 2011] Spectral fit parameter PhoIndex value = 1.9356
[Tue Nov 29 10:08:36 2011] Failed to get F(0.3-8.0) from xmm0502940301/analysis//spectral/fullrun_mos2_xmm0502940301_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Tue Nov 29 10:08:36 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 10:08:36 2011] Using Nh = 9.6e+20, photon index=1.94, rate=0.47, arf fullrun_mos2_xmm0502940301_pi300-10000_pass1_cl_src2.arf
[Tue Nov 29 10:08:36 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 10:08:36 2011] Updating source flux to 4.6e-12