[Mon Nov 28 19:51:15 2011] Detection parameters:
  Position = (223.2, 286.4) = 9 48 44.90 76 20 39.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 79.6 +/- 13.8
  Background counts = 45.8
  Rate = 0.004 +/- 0.0008

[Mon Nov 28 19:51:15 2011] Off-axis axis estimate = 5.52'
[Mon Nov 28 22:13:04 2011] Using EEF radius (= 9.19 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 22:13:04 2011] Initial guess for spatial extent in simple fitting = 9.19"
[Mon Nov 28 22:13:04 2011] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.916
[Mon Nov 28 22:13:04 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 9.19"
[Mon Nov 28 22:50:06 2011] fullrun_mos1_xmm0502940301_pi300-10000_cl_pass0_src6.ximg exists
[Mon Nov 28 22:50:06 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0502940301_pi300-10000_cl_pass0_src6.csv
[Mon Nov 28 22:50:06 2011] fullrun_mos1_xmm0502940301_pi300-10000_cl_pass0_src6_1.ximg exists
[Mon Nov 28 22:50:06 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0502940301_pi300-10000_cl_pass0_src6.csv
[Mon Nov 28 22:50:06 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502940301_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502940301_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 22:50:06 2011] fullrun_mos1_xmm0502940301_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Mon Nov 28 22:50:06 2011] fullrun_mos1_xmm0502940301_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Mon Nov 28 22:50:06 2011] Fit fullrun_mos1_xmm0502940301_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Mon Nov 28 23:37:50 2011] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 12.241335 pixels away
[Mon Nov 28 23:37:50 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 23:37:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 23:37:50 2011] Assessing source extent using major
[Mon Nov 28 23:37:50 2011] Source does appear to be extended
[Mon Nov 28 23:37:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 02:14:57 2011] Using EEF radius (= 9.19 ")to estimate initial spatial extent for simple fitting
[Tue Nov 29 02:14:57 2011] Initial guess for spatial extent in simple fitting = 9.19"
[Tue Nov 29 02:14:57 2011] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.916
[Tue Nov 29 02:14:57 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 9.19"
[Tue Nov 29 02:39:59 2011] fullrun_mos1_xmm0502940301_pi300-10000_cl_pass1_src5.ximg exists
[Tue Nov 29 02:39:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502940301_pi300-10000_cl_pass1_src5.csv
[Tue Nov 29 02:39:59 2011] fullrun_mos1_xmm0502940301_pi300-10000_cl_pass1_src5_1.ximg exists
[Tue Nov 29 02:39:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502940301_pi300-10000_cl_pass1_src5.csv
[Tue Nov 29 02:39:59 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502940301_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502940301_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 02:39:59 2011] fullrun_mos1_xmm0502940301_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Tue Nov 29 02:39:59 2011] fullrun_mos1_xmm0502940301_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Nov 29 02:39:59 2011] Fit fullrun_mos1_xmm0502940301_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Tue Nov 29 03:13:52 2011] Spatial fit model total counts = 151.656000, observed total counts = 152.000000
[Tue Nov 29 03:13:52 2011] Offset between fit and detection position for source 7 = 0.129779 pixels
[Tue Nov 29 03:13:52 2011] 146.019300 total counts/ 70.959700 bgd. counts: snr = 8.910465
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.129779 pixels
  Position = (223.2, 286.5) = 9 48 44.94 76 20 38.6
  Extent = 6.4 (5.0-7.7)", rotation angle = 0
  Source counts = 75.1 +/- 12.1
  Background counts = 71.0
  Rate = 0.004 +/- 0.0007
[Tue Nov 29 03:13:52 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 03:13:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 03:13:52 2011] Assessing source extent using major axis lower bound
[Tue Nov 29 03:13:52 2011] Source does appear to be extended
[Tue Nov 29 03:13:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 08:56:06 2011] XMMSAS src. selection expression = ellipse(19368.483220, 24879.247800, 381.584351, 381.584351, 0.000000, X, Y)
[Tue Nov 29 08:56:06 2011] Writing source region out to fullrun_mos1_xmm0502940301_pi300-10000_pass1_cl_src7_src.reg
[Tue Nov 29 08:56:06 2011] Extracting stamp from image fullrun_mos1_xmm0502940301_pi300-10000_cl_sm2.00.img.gz, (201, 265) - (245, 308)
[Tue Nov 29 08:56:06 2011] XMMSAS bgd. selection expression = annulus(19368.483220, 24879.247800, 635.973919, 1271.947837, X, Y)
[Tue Nov 29 08:56:06 2011] Writing fullrun_mos1_xmm0502940301_pi300-10000_pass1_cl_src7.gif
[Tue Nov 29 09:02:25 2011] Mean detx,y = (1436.12, -7370.68) 
[Tue Nov 29 09:02:27 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 09:02:52 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 09:02:52 2011] Setting source spectrum file to fullrun_mos1_xmm0502940301_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Tue Nov 29 09:02:52 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0502940301_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Tue Nov 29 09:29:34 2011] Not generating rmf since there are only 75 counts
[Tue Nov 29 09:29:34 2011] rmf not generated due to insufficient counts
[Tue Nov 29 10:07:22 2011] Updating aperture counts using extracted products
[Tue Nov 29 10:07:22 2011] Error reading totcts from fullrun_mos1_xmm0502940301_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Tue Nov 29 10:07:23 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 10:07:23 2011] Using photon index=1.80, rate=0.00415, arf fullrun_mos1_xmm0502940301_pi300-10000_pass1_cl_src7.arf
[Tue Nov 29 10:07:23 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 10:07:23 2011] Updating source flux to 6.8e-14
[Tue Nov 29 10:07:26 2011] Source 7 has fewer than 100.000000 counts, skipping spectral fitting