[Mon Nov 28 19:51:15 2011] Detection parameters:
  Position = (298.5, 321.9) = 9 47 12.45 76 23 13.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 9407.5 +/- 118.3
  Background counts = 73.0
  Rate = 0.3 +/- 0.004

[Mon Nov 28 19:51:15 2011] Off-axis axis estimate = 1.70'
[Mon Nov 28 22:13:04 2011] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 22:13:04 2011] Initial guess for spatial extent in simple fitting = 7.28"
[Mon Nov 28 22:13:04 2011] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.058
[Mon Nov 28 22:13:04 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Mon Nov 28 22:50:06 2011] fullrun_mos1_xmm0502940301_pi300-10000_cl_pass0_src1.ximg exists
[Mon Nov 28 22:50:06 2011] fullrun_mos1_xmm0502940301_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Nov 28 22:50:06 2011] Fit fullrun_mos1_xmm0502940301_pi300-10000_cl_pass0_src1 appears to have run properly
[Mon Nov 28 22:50:06 2011] fullrun_mos1_xmm0502940301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Nov 28 22:50:06 2011] fullrun_mos1_xmm0502940301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Nov 28 22:50:06 2011] Fit fullrun_mos1_xmm0502940301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Nov 28 23:37:50 2011] Spatial fit model total counts = 11012.200000, observed total counts = 11007.000000
[Mon Nov 28 23:37:50 2011] Offset between fit and detection position for source 3 = 0.134517 pixels
[Mon Nov 28 23:37:50 2011] 10988.470000 total counts/ 3398.390000 bgd. counts: snr = 130.199628
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.134517 pixels
  Position = (298.3, 321.9) = 9 47 12.61 76 23 13.4
  Extent = 11.1 (10.8-11.5)" x 9.1 (8.8-9.4)", rotation angle = 348 (343-353) degrees
  Source counts = 7590.1 +/- 104.8
  Background counts = 3398.4
  Rate = 0.4 +/- 0.006
[Mon Nov 28 23:37:50 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 23:37:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 23:37:50 2011] Assessing source extent using major axis lower bound
[Mon Nov 28 23:37:50 2011] Source does appear to be extended
[Mon Nov 28 23:37:50 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.15
[Tue Nov 29 02:14:57 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Nov 29 02:14:57 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Nov 29 02:14:57 2011] Initial guess for spatial extent in simple fitting = 10.10"
[Tue Nov 29 02:14:57 2011] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.942
[Tue Nov 29 02:14:57 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 10.10"
[Tue Nov 29 02:39:59 2011] fullrun_mos1_xmm0502940301_pi300-10000_cl_pass1_src1.ximg exists
[Tue Nov 29 02:39:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502940301_pi300-10000_cl_pass1_src1.csv
[Tue Nov 29 02:39:59 2011] fullrun_mos1_xmm0502940301_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Nov 29 02:39:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502940301_pi300-10000_cl_pass1_src1.csv
[Tue Nov 29 02:39:59 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502940301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502940301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 02:39:59 2011] fullrun_mos1_xmm0502940301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Nov 29 02:39:59 2011] fullrun_mos1_xmm0502940301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Nov 29 02:39:59 2011] Fit fullrun_mos1_xmm0502940301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Nov 29 03:13:52 2011] Spatial fit model total counts = 11996.900000, observed total counts = 11977.000000
[Tue Nov 29 03:13:52 2011] Offset between fit and detection position for source 3 = 0.028369 pixels
[Tue Nov 29 03:13:52 2011] 11983.910000 total counts/ 3799.870000 bgd. counts: snr = 132.764931
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.028369 pixels
  Position = (298.4, 321.8) = 9 47 12.60 76 23 13.3
  Extent = 10.7 (10.5-10.9)", rotation angle = 0
  Source counts = 8184.0 +/- 109.5
  Background counts = 3799.9
  Rate = 0.5 +/- 0.006
[Tue Nov 29 03:13:52 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 03:13:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 03:13:52 2011] Assessing source extent using major axis lower bound
[Tue Nov 29 03:13:52 2011] Source does appear to be extended
[Tue Nov 29 03:13:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 08:56:06 2011] Counts = 8184.040000, rescaling region sizes by 2.000000
[Tue Nov 29 08:56:06 2011] XMMSAS src. selection expression = ellipse(25908.390900, 27951.473400, 1283.700037, 1283.700037, 0.000000, X, Y)
[Tue Nov 29 08:56:06 2011] Writing source region out to fullrun_mos1_xmm0502940301_pi300-10000_pass1_cl_src3_src.reg
[Tue Nov 29 08:56:06 2011] Extracting stamp from image fullrun_mos1_xmm0502940301_pi300-10000_cl_sm2.00.img.gz, (225, 248) - (372, 396)
[Tue Nov 29 08:56:06 2011] XMMSAS bgd. selection expression = annulus(25908.390900, 27951.473400, 4279.000123, 8558.000246, X, Y) && !ellipse(31007.864160, 23912.836800, 420.905612, 420.905612, 0.000000, X, Y) && !ellipse(28723.101990, 32687.971405, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19368.483220, 24879.247800, 508.779135, 508.779135, 0.000000, X, Y) && !ellipse(25237.810516, 26783.080048, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Nov 29 08:56:06 2011] Writing fullrun_mos1_xmm0502940301_pi300-10000_pass1_cl_src3.gif
[Tue Nov 29 08:56:12 2011] Mean detx,y = (276.46, -225.78) 
[Tue Nov 29 08:56:14 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 09:00:38 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 09:00:39 2011] Setting source spectrum file to fullrun_mos1_xmm0502940301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Nov 29 09:00:39 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0502940301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Nov 29 10:07:22 2011] Updating aperture counts using extracted products
[Tue Nov 29 10:07:22 2011] Error reading totcts from fullrun_mos1_xmm0502940301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Nov 29 10:07:23 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 10:07:23 2011] Using photon index=1.80, rate=0.452, arf fullrun_mos1_xmm0502940301_pi300-10000_pass1_cl_src3.arf
[Tue Nov 29 10:07:23 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 10:07:23 2011] Updating source flux to 3.9e-12
[Tue Nov 29 10:07:59 2011] Reading fit data from xmm0502940301/analysis//spectral/fullrun_mos1_xmm0502940301_pi300-10000_pass1_cl_src3_pl.csv
[Tue Nov 29 10:07:59 2011] Spectral fit parameter nH value = 7.81164e+20
[Tue Nov 29 10:07:59 2011] Spectral fit parameter PhoIndex value = 1.91204
[Tue Nov 29 10:07:59 2011] Failed to get F(0.3-8.0) from xmm0502940301/analysis//spectral/fullrun_mos1_xmm0502940301_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Tue Nov 29 10:07:59 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 10:07:59 2011] Using Nh = 7.8e+20, photon index=1.91, rate=0.452, arf fullrun_mos1_xmm0502940301_pi300-10000_pass1_cl_src3.arf
[Tue Nov 29 10:07:59 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 10:07:59 2011] Updating source flux to 4e-12