[Mon Nov 28 19:51:15 2011] Detection parameters:
  Position = (290.6, 308.4) = 9 47 22.08 76 22 11.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 66.9 +/- 16.4
  Background counts = 67.8
  Rate = 0.003 +/- 0.0006

[Mon Nov 28 19:51:15 2011] Off-axis axis estimate = 0.92'
[Mon Nov 28 22:13:04 2011] Using EEF radius (= 6.89 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 22:13:04 2011] Initial guess for spatial extent in simple fitting = 6.89"
[Mon Nov 28 22:13:04 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.922
[Mon Nov 28 22:13:04 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 6.89"
[Mon Nov 28 22:50:06 2011] fullrun_mos1_xmm0502940301_pi300-10000_cl_pass0_src9.ximg exists
[Mon Nov 28 22:50:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502940301_pi300-10000_cl_pass0_src9.csv
[Mon Nov 28 22:50:06 2011] fullrun_mos1_xmm0502940301_pi300-10000_cl_pass0_src9_1.ximg exists
[Mon Nov 28 22:50:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502940301_pi300-10000_cl_pass0_src9.csv
[Mon Nov 28 22:50:06 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502940301_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502940301_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 22:50:06 2011] fullrun_mos1_xmm0502940301_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Mon Nov 28 22:50:06 2011] fullrun_mos1_xmm0502940301_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Mon Nov 28 22:50:06 2011] Fit fullrun_mos1_xmm0502940301_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Mon Nov 28 23:37:50 2011] Source 10 is offset by -4.599534 and -6.924160 pixels which is larger than
2 X fitted extent = 4.843586 x 4.843586, not incorporating fit results
[Mon Nov 28 23:37:50 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 23:37:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 23:37:50 2011] Assessing source extent using major
[Mon Nov 28 23:37:50 2011] Source does appear to be extended
[Mon Nov 28 23:37:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 02:14:57 2011] Using EEF radius (= 6.89 ")to estimate initial spatial extent for simple fitting
[Tue Nov 29 02:14:57 2011] Initial guess for spatial extent in simple fitting = 6.89"
[Tue Nov 29 02:14:57 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.922
[Tue Nov 29 02:14:57 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 6.89"
[Tue Nov 29 02:39:59 2011] fullrun_mos1_xmm0502940301_pi300-10000_cl_pass1_src7.ximg exists
[Tue Nov 29 02:39:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502940301_pi300-10000_cl_pass1_src7.csv
[Tue Nov 29 02:39:59 2011] fullrun_mos1_xmm0502940301_pi300-10000_cl_pass1_src7_1.ximg exists
[Tue Nov 29 02:39:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502940301_pi300-10000_cl_pass1_src7.csv
[Tue Nov 29 02:39:59 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502940301_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502940301_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 02:39:59 2011] fullrun_mos1_xmm0502940301_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Tue Nov 29 02:39:59 2011] fullrun_mos1_xmm0502940301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Tue Nov 29 02:39:59 2011] Fit fullrun_mos1_xmm0502940301_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Tue Nov 29 03:13:52 2011] Source 10 is offset by -4.576983 and -6.924160 pixels which is larger than
2 X fitted extent = 4.752230 x 4.752230, not incorporating fit results
[Tue Nov 29 03:13:52 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 03:13:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 03:13:52 2011] Assessing source extent using major
[Tue Nov 29 03:13:52 2011] Source does appear to be extended
[Tue Nov 29 03:13:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 08:56:06 2011] XMMSAS src. selection expression = ellipse(25237.810516, 26783.080048, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Nov 29 08:56:06 2011] Writing source region out to fullrun_mos1_xmm0502940301_pi300-10000_pass1_cl_src10_src.reg
[Tue Nov 29 08:56:06 2011] Extracting stamp from image fullrun_mos1_xmm0502940301_pi300-10000_cl_sm2.00.img.gz, (253, 271) - (328, 346)
[Tue Nov 29 08:56:06 2011] XMMSAS bgd. selection expression = annulus(25237.810516, 26783.080048, 1087.500000, 2175.000000, X, Y) && !ellipse(25908.390900, 27951.473400, 855.800025, 855.800025, 0.000000, X, Y)
[Tue Nov 29 08:56:06 2011] Writing fullrun_mos1_xmm0502940301_pi300-10000_pass1_cl_src10.gif
[Tue Nov 29 09:03:38 2011] Mean detx,y = (-187.79, -1285.18) 
[Tue Nov 29 09:03:40 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 09:03:56 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 09:03:56 2011] Setting source spectrum file to fullrun_mos1_xmm0502940301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Nov 29 09:03:56 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0502940301_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Tue Nov 29 09:29:42 2011] Not generating rmf since there are only 66 counts
[Tue Nov 29 09:29:42 2011] rmf not generated due to insufficient counts
[Tue Nov 29 10:07:22 2011] Updating aperture counts using extracted products
[Tue Nov 29 10:07:22 2011] Error reading totcts from fullrun_mos1_xmm0502940301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Nov 29 10:07:23 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 10:07:23 2011] Using photon index=1.80, rate=0.00256, arf fullrun_mos1_xmm0502940301_pi300-10000_pass1_cl_src10.arf
[Tue Nov 29 10:07:23 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 10:07:23 2011] Updating source flux to 2.5e-14
[Tue Nov 29 10:07:26 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting