[Sat Mar 17 10:45:45 2012] Detection parameters:
  Position = (266.3, 452.7) = 0 18 51.53 16 16 23.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 155.0 +/- 19.1
  Background counts = 59.0
  Rate = 0.003 +/- 0.0003

[Sat Mar 17 10:45:46 2012] Off-axis axis estimate = 11.42'
[Sat Mar 17 13:19:16 2012] Using EEF radius (= 12.14 ")to estimate initial spatial extent for simple fitting
[Sat Mar 17 13:19:16 2012] Initial guess for spatial extent in simple fitting = 12.14"
[Sat Mar 17 13:19:16 2012] source mask rpix=2.8, npix_max = 43, mask sum = 49, frac = 1.131
[Sat Mar 17 13:19:16 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 12.14"
[Sat Mar 17 14:25:37 2012] fullrun_mos2_xmm0502860101_pi300-10000_cl_pass0_src15.ximg exists
[Sat Mar 17 14:25:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502860101_pi300-10000_cl_pass0_src15.csv
[Sat Mar 17 14:25:37 2012] fullrun_mos2_xmm0502860101_pi300-10000_cl_pass0_src15_1.ximg exists
[Sat Mar 17 14:25:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502860101_pi300-10000_cl_pass0_src15.csv
[Sat Mar 17 14:25:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502860101_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502860101_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 17 14:25:38 2012] fullrun_mos2_xmm0502860101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Sat Mar 17 14:25:38 2012] fullrun_mos2_xmm0502860101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Sat Mar 17 14:25:38 2012] Fit fullrun_mos2_xmm0502860101_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Sat Mar 17 14:26:06 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 10.128587 pixels away
[Sat Mar 17 14:26:06 2012] Vigneting correction estimate = 1.000000
[Sat Mar 17 14:26:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 17 14:26:06 2012] Assessing source extent using major
[Sat Mar 17 14:26:06 2012] Source does appear to be extended
[Sat Mar 17 14:26:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 17 16:30:26 2012] Using EEF radius (= 12.14 ")to estimate initial spatial extent for simple fitting
[Sat Mar 17 16:30:26 2012] Initial guess for spatial extent in simple fitting = 12.14"
[Sat Mar 17 16:30:26 2012] source mask rpix=2.8, npix_max = 43, mask sum = 49, frac = 1.131
[Sat Mar 17 16:30:26 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 12.14"
[Sat Mar 17 17:20:54 2012] fullrun_mos2_xmm0502860101_pi300-10000_cl_pass1_src15.ximg exists
[Sat Mar 17 17:20:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502860101_pi300-10000_cl_pass1_src15.csv
[Sat Mar 17 17:20:54 2012] fullrun_mos2_xmm0502860101_pi300-10000_cl_pass1_src15_1.ximg exists
[Sat Mar 17 17:20:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502860101_pi300-10000_cl_pass1_src15.csv
[Sat Mar 17 17:20:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502860101_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502860101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 17 17:20:55 2012] fullrun_mos2_xmm0502860101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sat Mar 17 17:20:55 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0502860101_pi300-10000_cl_pass1_tfrozen_src15.csv
[Sat Mar 17 17:20:55 2012] fullrun_mos2_xmm0502860101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sat Mar 17 17:20:55 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0502860101_pi300-10000_cl_pass1_tfrozen_src15.csv
[Sat Mar 17 17:20:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502860101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502860101_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 17 17:21:22 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 15.796548 pixels away
[Sat Mar 17 17:21:22 2012] Vigneting correction estimate = 1.000000
[Sat Mar 17 17:21:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 17 17:21:22 2012] Assessing source extent using major
[Sat Mar 17 17:21:22 2012] Source does appear to be extended
[Sat Mar 17 17:21:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 17 18:55:05 2012] XMMSAS src. selection expression = ellipse(23122.312378, 39337.781677, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Mar 17 18:55:05 2012] Writing source region out to fullrun_mos2_xmm0502860101_pi300-10000_pass1_cl_src5_src.reg
[Sat Mar 17 18:55:05 2012] Extracting stamp from image fullrun_mos2_xmm0502860101_pi300-10000_cl_sm2.00.img.gz, (229, 415) - (304, 490)
[Sat Mar 17 18:55:05 2012] XMMSAS bgd. selection expression = annulus(23122.312378, 39337.781677, 1087.500000, 2175.000000, X, Y)
[Sat Mar 17 18:55:05 2012] Writing fullrun_mos2_xmm0502860101_pi300-10000_pass1_cl_src5.gif
[Sat Mar 17 19:02:20 2012] Mean detx,y = (8491.98, 9997.22) 
[Sat Mar 17 19:02:22 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 17 19:02:39 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 17 19:02:40 2012] Setting source spectrum file to fullrun_mos2_xmm0502860101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Mar 17 19:02:40 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502860101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sat Mar 17 19:34:42 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Mar 17 19:34:42 2012] rmf not generated due to insufficient counts
[Sat Mar 17 19:42:08 2012] Updating aperture counts using extracted products
[Sat Mar 17 19:42:08 2012] Error reading totcts from fullrun_mos2_xmm0502860101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Mar 17 19:42:09 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 17 19:42:09 2012] Using photon index=1.80, rate=0.00253, arf fullrun_mos2_xmm0502860101_pi300-10000_pass1_cl_src5.arf
[Sat Mar 17 19:42:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 17 19:42:09 2012] Updating source flux to 6.5e-14
[Sat Mar 17 19:42:13 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting