[Fri Jan  6 10:33:54 2012] Detection parameters:
  Position = (193.4, 247.2) = 16 9 12.82 60 16 2.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 165.1 +/- 18.7
  Background counts = 65.1
  Rate = 0.02 +/- 0.003

[Fri Jan  6 10:33:54 2012] Off-axis axis estimate = 8.48'
[Fri Jan  6 10:56:32 2012] Using EEF radius (= 10.67 ")to estimate initial spatial extent for simple fitting
[Fri Jan  6 10:56:32 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jan  6 10:56:32 2012] Initial guess for spatial extent in simple fitting = 10.67"
[Fri Jan  6 10:56:32 2012] source mask rpix=2.5, npix_max = 34, mask sum = 36, frac = 1.033
[Fri Jan  6 10:56:32 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 10.67"
[Fri Jan  6 11:03:51 2012] fullrun_mos2_xmm0502790401_pi300-10000_cl_pass0_src2.ximg exists
[Fri Jan  6 11:03:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502790401_pi300-10000_cl_pass0_src2.csv
[Fri Jan  6 11:03:51 2012] fullrun_mos2_xmm0502790401_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Jan  6 11:03:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502790401_pi300-10000_cl_pass0_src2.csv
[Fri Jan  6 11:03:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502790401_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502790401_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan  6 11:03:51 2012] fullrun_mos2_xmm0502790401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Jan  6 11:03:51 2012] fullrun_mos2_xmm0502790401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Jan  6 11:03:51 2012] Fit fullrun_mos2_xmm0502790401_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Jan  6 11:03:58 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 13.068883 pixels away
[Fri Jan  6 11:03:58 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 11:03:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 11:03:58 2012] Assessing source extent using major
[Fri Jan  6 11:03:58 2012] Source does appear to be extended
[Fri Jan  6 11:03:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 11:19:45 2012] Using EEF radius (= 10.67 ")to estimate initial spatial extent for simple fitting
[Fri Jan  6 11:19:45 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jan  6 11:19:45 2012] Initial guess for spatial extent in simple fitting = 10.67"
[Fri Jan  6 11:19:45 2012] source mask rpix=2.5, npix_max = 34, mask sum = 36, frac = 1.033
[Fri Jan  6 11:19:45 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 10.67"
[Fri Jan  6 11:29:57 2012] fullrun_mos2_xmm0502790401_pi300-10000_cl_pass1_src2.ximg exists
[Fri Jan  6 11:29:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502790401_pi300-10000_cl_pass1_src2.csv
[Fri Jan  6 11:29:57 2012] fullrun_mos2_xmm0502790401_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Jan  6 11:29:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502790401_pi300-10000_cl_pass1_src2.csv
[Fri Jan  6 11:29:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502790401_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502790401_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan  6 11:29:57 2012] fullrun_mos2_xmm0502790401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Jan  6 11:29:57 2012] fullrun_mos2_xmm0502790401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Jan  6 11:29:57 2012] Fit fullrun_mos2_xmm0502790401_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Jan  6 11:30:04 2012] Spatial fit model total counts = 214.533000, observed total counts = 214.000000
[Fri Jan  6 11:30:04 2012] Offset between fit and detection position for source 4 = 0.152684 pixels
[Fri Jan  6 11:30:04 2012] 216.616800 total counts/ 159.754000 bgd. counts: snr = 4.498859
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.152684 pixels
  Position = (193.5, 247.1) = 16 9 12.75 60 16 1.2
  Extent = 3.1 (2.7-4.3)", rotation angle = 0
  Source counts = 56.9 +/- 14.7
  Background counts = 159.8
  Rate = 0.009 +/- 0.002
[Fri Jan  6 11:30:04 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 11:30:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 11:30:04 2012] Assessing source extent using major axis lower bound
[Fri Jan  6 11:30:04 2012] Source does appear to be extended
[Fri Jan  6 11:30:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 11:55:26 2012] XMMSAS src. selection expression = ellipse(16784.935800, 21452.651800, 188.625005, 188.625005, 0.000000, X, Y)
[Fri Jan  6 11:55:26 2012] Writing source region out to fullrun_mos2_xmm0502790401_pi300-10000_pass1_cl_src4_src.reg
[Fri Jan  6 11:55:26 2012] Extracting stamp from image fullrun_mos2_xmm0502790401_pi300-10000_cl_sm2.00.img.gz, (183, 236) - (204, 258)
[Fri Jan  6 11:55:26 2012] XMMSAS bgd. selection expression = annulus(16784.935800, 21452.651800, 314.375009, 628.750018, X, Y)
[Fri Jan  6 11:55:26 2012] Writing fullrun_mos2_xmm0502790401_pi300-10000_pass1_cl_src4.gif
[Fri Jan  6 11:56:04 2012] Mean detx,y = (-7158.83, 4163.97) 
[Fri Jan  6 11:56:06 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan  6 11:56:16 2012] Binned source spectrum to 10 counts/bin
[Fri Jan  6 11:56:17 2012] Setting source spectrum file to fullrun_mos2_xmm0502790401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jan  6 11:56:17 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502790401_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Jan  6 12:01:23 2012] Not generating rmf since there are only 56 counts
[Fri Jan  6 12:01:23 2012] rmf not generated due to insufficient counts
[Fri Jan  6 12:01:56 2012] Updating aperture counts using extracted products
[Fri Jan  6 12:01:56 2012] Error reading totcts from fullrun_mos2_xmm0502790401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jan  6 12:01:56 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 12:01:56 2012] Using photon index=1.80, rate=0.00854, arf fullrun_mos2_xmm0502790401_pi300-10000_pass1_cl_src4.arf
[Fri Jan  6 12:01:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 12:01:56 2012] Updating source flux to 2.6e-13
[Fri Jan  6 12:02:27 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting