[Fri Jan  6 10:33:54 2012] Detection parameters:
  Position = (283.2, 280.8) = 16 8 20.30 60 18 28.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4512.8 +/- 81.5
  Background counts = 72.7
  Rate = 0.4 +/- 0.008

[Fri Jan  6 10:33:54 2012] Off-axis axis estimate = 1.69'
[Fri Jan  6 10:56:32 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Fri Jan  6 10:56:32 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Fri Jan  6 10:56:32 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.848
[Fri Jan  6 10:56:32 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Fri Jan  6 11:03:51 2012] fullrun_mos2_xmm0502790401_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jan  6 11:03:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502790401_pi300-10000_cl_pass0_src1.csv
[Fri Jan  6 11:03:51 2012] fullrun_mos2_xmm0502790401_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jan  6 11:03:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502790401_pi300-10000_cl_pass0_src1.csv
[Fri Jan  6 11:03:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502790401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502790401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan  6 11:03:51 2012] fullrun_mos2_xmm0502790401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jan  6 11:03:51 2012] fullrun_mos2_xmm0502790401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jan  6 11:03:51 2012] Fit fullrun_mos2_xmm0502790401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jan  6 11:03:58 2012] Spatial fit model total counts = 2605.000000, observed total counts = 2605.000000
[Fri Jan  6 11:03:58 2012] Offset between fit and detection position for source 1 = 0.153432 pixels
[Fri Jan  6 11:03:58 2012] 2617.613000 total counts/ 630.373000 bgd. counts: snr = 79.150109
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.153432 pixels
  Position = (283.2, 280.6) = 16 8 20.28 60 18 27.7
  Extent = 5.4 (5.2-5.6)", rotation angle = 0
  Source counts = 1987.2 +/- 51.2
  Background counts = 630.4
  Rate = 0.3 +/- 0.008
[Fri Jan  6 11:03:58 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 11:03:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 11:03:58 2012] Assessing source extent using major axis lower bound
[Fri Jan  6 11:03:58 2012] Source does appear to be extended
[Fri Jan  6 11:03:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 11:19:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jan  6 11:19:45 2012] Initial guess for spatial extent in simple fitting = 5.41"
[Fri Jan  6 11:19:45 2012] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.987
[Fri Jan  6 11:19:45 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.41"
[Fri Jan  6 11:29:57 2012] fullrun_mos2_xmm0502790401_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jan  6 11:29:57 2012] fullrun_mos2_xmm0502790401_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jan  6 11:29:57 2012] Fit fullrun_mos2_xmm0502790401_pi300-10000_cl_pass1_src1 appears to have run properly
[Fri Jan  6 11:29:57 2012] fullrun_mos2_xmm0502790401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jan  6 11:29:57 2012] fullrun_mos2_xmm0502790401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jan  6 11:29:57 2012] Fit fullrun_mos2_xmm0502790401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jan  6 11:30:04 2012] Spatial fit model total counts = 2612.000000, observed total counts = 2612.000000
[Fri Jan  6 11:30:04 2012] Offset between fit and detection position for source 1 = 0.008429 pixels
[Fri Jan  6 11:30:04 2012] 2632.667000 total counts/ 643.767000 bgd. counts: snr = 78.387821
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.008429 pixels
  Position = (283.2, 280.6) = 16 8 20.28 60 18 27.6
  Extent = 5.4 (5.2-5.6)", rotation angle = 0
  Source counts = 1988.9 +/- 51.3
  Background counts = 643.8
  Rate = 0.3 +/- 0.008
[Fri Jan  6 11:30:04 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 11:30:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 11:30:04 2012] Assessing source extent using major axis lower bound
[Fri Jan  6 11:30:04 2012] Source does appear to be extended
[Fri Jan  6 11:30:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 11:55:26 2012] Counts = 1988.900000, rescaling region sizes by 2.000000
[Fri Jan  6 11:55:26 2012] XMMSAS src. selection expression = ellipse(24592.297900, 24364.176200, 650.226019, 650.226019, 0.000000, X, Y)
[Fri Jan  6 11:55:26 2012] Writing source region out to fullrun_mos2_xmm0502790401_pi300-10000_pass1_cl_src1_src.reg
[Fri Jan  6 11:55:26 2012] Extracting stamp from image fullrun_mos2_xmm0502790401_pi300-10000_cl_sm2.00.img.gz, (246, 243) - (321, 318)
[Fri Jan  6 11:55:26 2012] XMMSAS bgd. selection expression = annulus(24592.297900, 24364.176200, 2167.420062, 4334.840125, X, Y) && !ellipse(27567.139404, 24938.902008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24367.257600, 22086.585000, 471.259214, 471.259214, 0.000000, X, Y)
[Fri Jan  6 11:55:26 2012] Writing fullrun_mos2_xmm0502790401_pi300-10000_pass1_cl_src1.gif
[Fri Jan  6 11:55:30 2012] Mean detx,y = (121.57, 98.32) 
[Fri Jan  6 11:55:33 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan  6 11:55:58 2012] Binned source spectrum to 10 counts/bin
[Fri Jan  6 11:55:58 2012] Setting source spectrum file to fullrun_mos2_xmm0502790401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jan  6 11:55:58 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502790401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jan  6 12:01:56 2012] Updating aperture counts using extracted products
[Fri Jan  6 12:01:56 2012] Error reading totcts from fullrun_mos2_xmm0502790401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jan  6 12:01:56 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 12:01:56 2012] Using photon index=1.80, rate=0.299, arf fullrun_mos2_xmm0502790401_pi300-10000_pass1_cl_src1.arf
[Fri Jan  6 12:01:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 12:01:56 2012] Updating source flux to 3.1e-12
[Fri Jan  6 12:02:51 2012] Reading fit data from xmm0502790401/analysis//spectral/fullrun_mos2_xmm0502790401_pi300-10000_pass1_cl_src1_pl.csv
[Fri Jan  6 12:02:51 2012] Spectral fit parameter nH value = 4.66732e+14
[Fri Jan  6 12:02:51 2012] Spectral fit parameter PhoIndex value = 2.00388
[Fri Jan  6 12:02:51 2012] Failed to get F(0.3-8.0) from xmm0502790401/analysis//spectral/fullrun_mos2_xmm0502790401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Jan  6 12:02:51 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 12:02:51 2012] Using Nh = 4.7e+14, photon index=2.00, rate=0.299, arf fullrun_mos2_xmm0502790401_pi300-10000_pass1_cl_src1.arf
[Fri Jan  6 12:02:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 12:02:51 2012] Updating source flux to 2.9e-12