[Mon May 28 07:46:00 2012] Detection parameters:
  Position = (319.0, 310.3) = 2 27 31.94 -8 48 13.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 754.0 +/- 34.6
  Background counts = 50.4
  Rate = 0.06 +/- 0.003

[Mon May 28 07:46:00 2012] Off-axis axis estimate = 1.72'
[Mon May 28 07:47:23 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Mon May 28 07:47:23 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Mon May 28 07:47:23 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Mon May 28 07:47:23 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 7.29"
[Mon May 28 08:12:24 2012] fullrun_pn_xmm0502790201_pi300-10000_cl_pass0_src15.ximg exists
[Mon May 28 08:12:24 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502790201_pi300-10000_cl_pass0_src15.csv
[Mon May 28 08:12:24 2012] fullrun_pn_xmm0502790201_pi300-10000_cl_pass0_src15_1.ximg exists
[Mon May 28 08:12:24 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502790201_pi300-10000_cl_pass0_src15.csv
[Mon May 28 08:12:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502790201_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502790201_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 08:12:24 2012] fullrun_pn_xmm0502790201_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Mon May 28 08:12:24 2012] fullrun_pn_xmm0502790201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Mon May 28 08:12:24 2012] Fit fullrun_pn_xmm0502790201_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Mon May 28 08:48:21 2012] Spatial fit model total counts = 679.960000, observed total counts = 675.000000
[Mon May 28 08:48:21 2012] Offset between fit and detection position for source 15 = 0.234561 pixels
[Mon May 28 08:48:21 2012] 688.178000 total counts/ 311.375000 bgd. counts: snr = 21.353668
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.234561 pixels
  Position = (318.8, 310.4) = 2 27 32.00 -8 48 13.7
  Extent = 5.6 (5.1-6.2)", rotation angle = 0
  Source counts = 376.8 +/- 26.2
  Background counts = 311.4
  Rate = 0.03 +/- 0.002
[Mon May 28 08:48:21 2012] Vigneting correction estimate = 1.000000
[Mon May 28 08:48:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 08:48:21 2012] Assessing source extent using major axis lower bound
[Mon May 28 08:48:21 2012] Source does appear to be extended
[Mon May 28 08:48:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 08:48:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 28 08:48:31 2012] Initial guess for spatial extent in simple fitting = 5.64"
[Mon May 28 08:48:31 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.930
[Mon May 28 08:48:31 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 5.64"
[Mon May 28 09:11:55 2012] fullrun_pn_xmm0502790201_pi300-10000_cl_pass1_src15.ximg exists
[Mon May 28 09:11:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502790201_pi300-10000_cl_pass1_src15.csv
[Mon May 28 09:11:55 2012] fullrun_pn_xmm0502790201_pi300-10000_cl_pass1_src15_1.ximg exists
[Mon May 28 09:11:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502790201_pi300-10000_cl_pass1_src15.csv
[Mon May 28 09:11:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502790201_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502790201_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 09:11:56 2012] fullrun_pn_xmm0502790201_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Mon May 28 09:11:56 2012] fullrun_pn_xmm0502790201_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Mon May 28 09:11:56 2012] Fit fullrun_pn_xmm0502790201_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Mon May 28 09:41:54 2012] Spatial fit model total counts = 675.399000, observed total counts = 674.000000
[Mon May 28 09:41:54 2012] Offset between fit and detection position for source 15 = 0.007620 pixels
[Mon May 28 09:41:54 2012] 683.008000 total counts/ 311.980000 bgd. counts: snr = 21.005997
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.007620 pixels
  Position = (318.8, 310.4) = 2 27 32.00 -8 48 13.7
  Extent = 5.5 (5.0-6.1)", rotation angle = 0
  Source counts = 371.0 +/- 26.1
  Background counts = 312.0
  Rate = 0.03 +/- 0.002
[Mon May 28 09:41:54 2012] Vigneting correction estimate = 1.000000
[Mon May 28 09:41:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 09:41:54 2012] Assessing source extent using major axis lower bound
[Mon May 28 09:41:54 2012] Source does appear to be extended
[Mon May 28 09:41:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 09:42:07 2012] XMMSAS src. selection expression = ellipse(27688.377000, 26960.211800, 331.138810, 331.138810, 0.000000, X, Y)
[Mon May 28 09:42:07 2012] Writing source region out to fullrun_pn_xmm0502790201_pi300-10000_pass1_cl_src15_src.reg
[Mon May 28 09:42:07 2012] Extracting stamp from image fullrun_pn_xmm0502790201_pi300-10000_cl_sm2.00.img.gz, (300, 291) - (338, 329)
[Mon May 28 09:42:07 2012] XMMSAS bgd. selection expression = annulus(27688.377000, 26960.211800, 551.898016, 1103.796032, X, Y)
[Mon May 28 09:42:07 2012] Writing fullrun_pn_xmm0502790201_pi300-10000_pass1_cl_src15.gif
[Mon May 28 09:47:01 2012] Mean detx,y = (102.22, -221.67) 
[Mon May 28 09:47:02 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 09:47:12 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 09:47:12 2012] Setting source spectrum file to fullrun_pn_xmm0502790201_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Mon May 28 09:47:12 2012] Setting bgd. spectrum file to fullrun_pn_xmm0502790201_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Mon May 28 10:24:01 2012] Updating aperture counts using extracted products
[Mon May 28 10:24:01 2012] Error reading totcts from fullrun_pn_xmm0502790201_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Mon May 28 10:24:01 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 10:24:01 2012] Using photon index=1.80, rate=0.0334, arf fullrun_pn_xmm0502790201_pi300-10000_pass1_cl_src15.arf
[Mon May 28 10:24:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 10:24:01 2012] Updating source flux to 9.7e-14
[Mon May 28 10:24:31 2012] Reading fit data from xmm0502790201/analysis//spectral/fullrun_pn_xmm0502790201_pi300-10000_pass1_cl_src15_pl.csv
[Mon May 28 10:24:31 2012] Spectral fit parameter nH value = 1.16008e+20
[Mon May 28 10:24:31 2012] Spectral fit parameter PhoIndex value = 1.52915
[Mon May 28 10:24:31 2012] Failed to get F(0.3-8.0) from xmm0502790201/analysis//spectral/fullrun_pn_xmm0502790201_pi300-10000_pass1_cl_src15_pl.csv, possibly due to different flux energy range selected
[Mon May 28 10:24:31 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 10:24:31 2012] Using Nh = 1.2e+20, photon index=1.53, rate=0.0334, arf fullrun_pn_xmm0502790201_pi300-10000_pass1_cl_src15.arf
[Mon May 28 10:24:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 10:24:31 2012] Updating source flux to 1.2e-13