[Mon May 28 07:46:26 2012] Detection parameters:
  Position = (203.3, 375.9) = 2 28 5.89 -8 43 28.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 54.6 +/- 9.7
  Background counts = 9.0
  Rate = 0.003 +/- 0.0005

[Mon May 28 07:46:26 2012] Off-axis axis estimate = 8.89'
[Mon May 28 08:30:02 2012] Using EEF radius (= 10.87 ")to estimate initial spatial extent for simple fitting
[Mon May 28 08:30:02 2012] Initial guess for spatial extent in simple fitting = 10.87"
[Mon May 28 08:30:02 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.000
[Mon May 28 08:30:02 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 10.87"
[Mon May 28 08:48:17 2012] fullrun_mos2_xmm0502790201_pi300-10000_cl_pass0_src9.ximg exists
[Mon May 28 08:48:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502790201_pi300-10000_cl_pass0_src9.csv
[Mon May 28 08:48:17 2012] fullrun_mos2_xmm0502790201_pi300-10000_cl_pass0_src9_1.ximg exists
[Mon May 28 08:48:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502790201_pi300-10000_cl_pass0_src9.csv
[Mon May 28 08:48:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502790201_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502790201_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 08:48:17 2012] fullrun_mos2_xmm0502790201_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Mon May 28 08:48:17 2012] fullrun_mos2_xmm0502790201_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Mon May 28 08:48:17 2012] Fit fullrun_mos2_xmm0502790201_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Mon May 28 08:48:25 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 13.025746 pixels away
[Mon May 28 08:48:25 2012] Vigneting correction estimate = 1.000000
[Mon May 28 08:48:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 08:48:25 2012] Assessing source extent using major
[Mon May 28 08:48:25 2012] Source does appear to be extended
[Mon May 28 08:48:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 09:27:26 2012] Using EEF radius (= 10.87 ")to estimate initial spatial extent for simple fitting
[Mon May 28 09:27:26 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 28 09:27:26 2012] Initial guess for spatial extent in simple fitting = 10.87"
[Mon May 28 09:27:26 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.000
[Mon May 28 09:27:26 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 10.87"
[Mon May 28 09:41:49 2012] fullrun_mos2_xmm0502790201_pi300-10000_cl_pass1_src8.ximg exists
[Mon May 28 09:41:49 2012] fullrun_mos2_xmm0502790201_pi300-10000_cl_pass1_src8_1.ximg exists
[Mon May 28 09:41:49 2012] Fit fullrun_mos2_xmm0502790201_pi300-10000_cl_pass1_src8 appears to have run properly
[Mon May 28 09:41:49 2012] fullrun_mos2_xmm0502790201_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Mon May 28 09:41:49 2012] fullrun_mos2_xmm0502790201_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Mon May 28 09:41:49 2012] Fit fullrun_mos2_xmm0502790201_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Mon May 28 09:41:59 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 11.733945 pixels away
[Mon May 28 09:41:59 2012] Vigneting correction estimate = 1.000000
[Mon May 28 09:41:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 09:41:59 2012] Assessing source extent using major
[Mon May 28 09:41:59 2012] Source does appear to be extended
[Mon May 28 09:41:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 10:10:56 2012] XMMSAS src. selection expression = ellipse(17639.913177, 32651.608124, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 28 10:10:56 2012] Writing source region out to fullrun_mos2_xmm0502790201_pi300-10000_pass1_cl_src9_src.reg
[Mon May 28 10:10:56 2012] Extracting stamp from image fullrun_mos2_xmm0502790201_pi300-10000_cl_sm2.00.img.gz, (166, 338) - (241, 413)
[Mon May 28 10:10:56 2012] XMMSAS bgd. selection expression = annulus(17639.913177, 32651.608124, 1087.500000, 2175.000000, X, Y) && !ellipse(17093.830520, 34085.873400, 513.463215, 513.463215, 0.000000, X, Y)
[Mon May 28 10:10:56 2012] Writing fullrun_mos2_xmm0502790201_pi300-10000_pass1_cl_src9.gif
[Mon May 28 10:12:43 2012] Mean detx,y = (11579.67, 820.05) 
[Mon May 28 10:12:44 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 10:12:52 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 10:12:52 2012] Setting source spectrum file to fullrun_mos2_xmm0502790201_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Mon May 28 10:12:52 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502790201_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Mon May 28 10:22:47 2012] Not generating rmf since there are only 54 counts
[Mon May 28 10:22:47 2012] rmf not generated due to insufficient counts
[Mon May 28 10:24:02 2012] Updating aperture counts using extracted products
[Mon May 28 10:24:02 2012] Error reading totcts from fullrun_mos2_xmm0502790201_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Mon May 28 10:24:02 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 10:24:02 2012] Using photon index=1.80, rate=0.00307, arf fullrun_mos2_xmm0502790201_pi300-10000_pass1_cl_src9.arf
[Mon May 28 10:24:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 10:24:02 2012] Updating source flux to 6.8e-14
[Mon May 28 10:24:14 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting