[Mon May 28 07:46:26 2012] Detection parameters:
  Position = (317.6, 150.1) = 2 27 32.34 -8 59 51.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 152.5 +/- 15.8
  Background counts = 10.9
  Rate = 0.009 +/- 0.0009

[Mon May 28 07:46:26 2012] Off-axis axis estimate = 10.85'
[Mon May 28 08:30:02 2012] Using EEF radius (= 11.85 ")to estimate initial spatial extent for simple fitting
[Mon May 28 08:30:02 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 28 08:30:02 2012] Initial guess for spatial extent in simple fitting = 11.85"
[Mon May 28 08:30:02 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.010
[Mon May 28 08:30:02 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.85"
[Mon May 28 08:48:17 2012] fullrun_mos2_xmm0502790201_pi300-10000_cl_pass0_src3.ximg exists
[Mon May 28 08:48:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502790201_pi300-10000_cl_pass0_src3.csv
[Mon May 28 08:48:17 2012] fullrun_mos2_xmm0502790201_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon May 28 08:48:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502790201_pi300-10000_cl_pass0_src3.csv
[Mon May 28 08:48:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502790201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502790201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 08:48:17 2012] fullrun_mos2_xmm0502790201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon May 28 08:48:17 2012] fullrun_mos2_xmm0502790201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon May 28 08:48:17 2012] Fit fullrun_mos2_xmm0502790201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon May 28 08:48:25 2012] Spatial fit model total counts = 273.028000, observed total counts = 271.000000
[Mon May 28 08:48:25 2012] Offset between fit and detection position for source 3 = 0.117378 pixels
[Mon May 28 08:48:25 2012] 273.729000 total counts/ 172.965000 bgd. counts: snr = 7.661720
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.117378 pixels
  Position = (317.8, 150.1) = 2 27 32.31 -8 59 51.2
  Extent = 5.4 (3.9-7.3)", rotation angle = 0
  Source counts = 100.8 +/- 16.5
  Background counts = 173.0
  Rate = 0.006 +/- 0.0009
[Mon May 28 08:48:25 2012] Vigneting correction estimate = 1.000000
[Mon May 28 08:48:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 08:48:25 2012] Assessing source extent using major axis lower bound
[Mon May 28 08:48:25 2012] Source does appear to be extended
[Mon May 28 08:48:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 09:27:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 28 09:27:26 2012] Initial guess for spatial extent in simple fitting = 5.37"
[Mon May 28 09:27:26 2012] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.997
[Mon May 28 09:27:26 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.37"
[Mon May 28 09:41:49 2012] fullrun_mos2_xmm0502790201_pi300-10000_cl_pass1_src3.ximg exists
[Mon May 28 09:41:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502790201_pi300-10000_cl_pass1_src3.csv
[Mon May 28 09:41:49 2012] fullrun_mos2_xmm0502790201_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon May 28 09:41:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502790201_pi300-10000_cl_pass1_src3.csv
[Mon May 28 09:41:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502790201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502790201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 09:41:49 2012] fullrun_mos2_xmm0502790201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon May 28 09:41:49 2012] fullrun_mos2_xmm0502790201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon May 28 09:41:49 2012] Fit fullrun_mos2_xmm0502790201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon May 28 09:41:59 2012] Spatial fit model total counts = 252.999000, observed total counts = 253.000000
[Mon May 28 09:41:59 2012] Offset between fit and detection position for source 3 = 0.013257 pixels
[Mon May 28 09:41:59 2012] 253.562000 total counts/ 151.640000 bgd. counts: snr = 8.276773
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.013257 pixels
  Position = (317.8, 150.1) = 2 27 32.30 -8 59 51.2
  Extent = 5.6 (3.9-7.3)", rotation angle = 0
  Source counts = 101.9 +/- 15.9
  Background counts = 151.6
  Rate = 0.006 +/- 0.0009
[Mon May 28 09:41:59 2012] Vigneting correction estimate = 1.000000
[Mon May 28 09:41:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 09:41:59 2012] Assessing source extent using major axis lower bound
[Mon May 28 09:41:59 2012] Source does appear to be extended
[Mon May 28 09:41:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 10:10:55 2012] XMMSAS src. selection expression = ellipse(27598.020520, 13009.122000, 336.725410, 336.725410, 0.000000, X, Y)
[Mon May 28 10:10:55 2012] Writing source region out to fullrun_mos2_xmm0502790201_pi300-10000_pass1_cl_src3_src.reg
[Mon May 28 10:10:55 2012] Extracting stamp from image fullrun_mos2_xmm0502790201_pi300-10000_cl_sm2.00.img.gz, (298, 131) - (337, 169)
[Mon May 28 10:10:56 2012] XMMSAS bgd. selection expression = annulus(27598.020520, 13009.122000, 561.209016, 1122.418032, X, Y)
[Mon May 28 10:10:56 2012] Writing fullrun_mos2_xmm0502790201_pi300-10000_pass1_cl_src3.gif
[Mon May 28 10:11:36 2012] Mean detx,y = (-5918.05, -12532.88) 
[Mon May 28 10:11:37 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 10:11:44 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 10:11:44 2012] Setting source spectrum file to fullrun_mos2_xmm0502790201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon May 28 10:11:44 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502790201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon May 28 10:24:02 2012] Updating aperture counts using extracted products
[Mon May 28 10:24:02 2012] Error reading totcts from fullrun_mos2_xmm0502790201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon May 28 10:24:02 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 10:24:02 2012] Using photon index=1.80, rate=0.00574, arf fullrun_mos2_xmm0502790201_pi300-10000_pass1_cl_src3.arf
[Mon May 28 10:24:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 10:24:02 2012] Updating source flux to 1.6e-13