[Mon May 28 07:46:26 2012] Detection parameters:
  Position = (463.5, 252.2) = 2 26 49.52 -8 52 27.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 41.8 +/- 8.8
  Background counts = 10.8
  Rate = 0.002 +/- 0.0005

[Mon May 28 07:46:26 2012] Off-axis axis estimate = 12.43'
[Mon May 28 08:30:02 2012] Using EEF radius (= 12.64 ")to estimate initial spatial extent for simple fitting
[Mon May 28 08:30:02 2012] Initial guess for spatial extent in simple fitting = 12.64"
[Mon May 28 08:30:02 2012] source mask rpix=2.9, npix_max = 46, mask sum = 40, frac = 0.862
[Mon May 28 08:30:02 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 12.64"
[Mon May 28 08:48:17 2012] fullrun_mos2_xmm0502790201_pi300-10000_cl_pass0_src18.ximg exists
[Mon May 28 08:48:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502790201_pi300-10000_cl_pass0_src18.csv
[Mon May 28 08:48:17 2012] fullrun_mos2_xmm0502790201_pi300-10000_cl_pass0_src18_1.ximg exists
[Mon May 28 08:48:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502790201_pi300-10000_cl_pass0_src18.csv
[Mon May 28 08:48:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502790201_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502790201_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 08:48:17 2012] fullrun_mos2_xmm0502790201_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Mon May 28 08:48:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502790201_pi300-10000_cl_pass0_tfrozen_src18.csv
[Mon May 28 08:48:17 2012] fullrun_mos2_xmm0502790201_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Mon May 28 08:48:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502790201_pi300-10000_cl_pass0_tfrozen_src18.csv
[Mon May 28 08:48:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502790201_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502790201_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 08:48:25 2012] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 11.682457 pixels away
[Mon May 28 08:48:25 2012] Vigneting correction estimate = 1.000000
[Mon May 28 08:48:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 08:48:25 2012] Assessing source extent using major
[Mon May 28 08:48:25 2012] Source does appear to be extended
[Mon May 28 08:48:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 09:27:26 2012] Using EEF radius (= 12.64 ")to estimate initial spatial extent for simple fitting
[Mon May 28 09:27:26 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 28 09:27:26 2012] Initial guess for spatial extent in simple fitting = 12.64"
[Mon May 28 09:27:26 2012] source mask rpix=2.9, npix_max = 46, mask sum = 40, frac = 0.862
[Mon May 28 09:27:26 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 12.64"
[Mon May 28 09:41:49 2012] fullrun_mos2_xmm0502790201_pi300-10000_cl_pass1_src15.ximg exists
[Mon May 28 09:41:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502790201_pi300-10000_cl_pass1_src15.csv
[Mon May 28 09:41:49 2012] fullrun_mos2_xmm0502790201_pi300-10000_cl_pass1_src15_1.ximg exists
[Mon May 28 09:41:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502790201_pi300-10000_cl_pass1_src15.csv
[Mon May 28 09:41:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502790201_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502790201_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 09:41:49 2012] fullrun_mos2_xmm0502790201_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Mon May 28 09:41:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502790201_pi300-10000_cl_pass1_tfrozen_src15.csv
[Mon May 28 09:41:49 2012] fullrun_mos2_xmm0502790201_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Mon May 28 09:41:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502790201_pi300-10000_cl_pass1_tfrozen_src15.csv
[Mon May 28 09:41:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502790201_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502790201_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 09:41:59 2012] Spatial fit model total counts = 161.047000, observed total counts = 145.000000
[Mon May 28 09:41:59 2012] Poor agreement between spatial fit and data for source 17
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 28 09:41:59 2012] Vigneting correction estimate = 1.000000
[Mon May 28 09:41:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 09:41:59 2012] Assessing source extent using major
[Mon May 28 09:41:59 2012] Source does appear to be extended
[Mon May 28 09:41:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 10:10:56 2012] XMMSAS src. selection expression = ellipse(40278.888672, 21890.429230, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 28 10:10:56 2012] Writing source region out to fullrun_mos2_xmm0502790201_pi300-10000_pass1_cl_src17_src.reg
[Mon May 28 10:10:56 2012] Extracting stamp from image fullrun_mos2_xmm0502790201_pi300-10000_cl_sm2.00.img.gz, (426, 215) - (501, 290)
[Mon May 28 10:10:56 2012] XMMSAS bgd. selection expression = annulus(40278.888672, 21890.429230, 1087.500000, 2175.000000, X, Y)
[Mon May 28 10:10:56 2012] Writing fullrun_mos2_xmm0502790201_pi300-10000_pass1_cl_src17.gif
[Mon May 28 10:14:04 2012] Mean detx,y = (-13528.79, 982.82) 
[Mon May 28 10:14:05 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 10:14:14 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 10:14:14 2012] Setting source spectrum file to fullrun_mos2_xmm0502790201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Mon May 28 10:14:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502790201_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Mon May 28 10:23:19 2012] Not generating rmf since there are only 41 counts
[Mon May 28 10:23:19 2012] rmf not generated due to insufficient counts
[Mon May 28 10:24:02 2012] Updating aperture counts using extracted products
[Mon May 28 10:24:02 2012] Error reading totcts from fullrun_mos2_xmm0502790201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Mon May 28 10:24:02 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 10:24:02 2012] Using photon index=1.80, rate=0.00235, arf fullrun_mos2_xmm0502790201_pi300-10000_pass1_cl_src17.arf
[Mon May 28 10:24:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 10:24:02 2012] Updating source flux to 5.1e-14
[Mon May 28 10:24:14 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting