[Mon May 28 07:46:26 2012] Detection parameters:
  Position = (318.8, 310.7) = 2 27 32.00 -8 48 13.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 328.5 +/- 22.3
  Background counts = 13.9
  Rate = 0.02 +/- 0.001

[Mon May 28 07:46:26 2012] Off-axis axis estimate = 1.72'
[Mon May 28 08:30:02 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Mon May 28 08:30:02 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Mon May 28 08:30:02 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Mon May 28 08:30:02 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Mon May 28 08:48:17 2012] fullrun_mos2_xmm0502790201_pi300-10000_cl_pass0_src1.ximg exists
[Mon May 28 08:48:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502790201_pi300-10000_cl_pass0_src1.csv
[Mon May 28 08:48:17 2012] fullrun_mos2_xmm0502790201_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon May 28 08:48:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502790201_pi300-10000_cl_pass0_src1.csv
[Mon May 28 08:48:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502790201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502790201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 08:48:17 2012] fullrun_mos2_xmm0502790201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon May 28 08:48:17 2012] fullrun_mos2_xmm0502790201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon May 28 08:48:17 2012] Fit fullrun_mos2_xmm0502790201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon May 28 08:48:25 2012] Spatial fit model total counts = 395.939000, observed total counts = 385.000000
[Mon May 28 08:48:25 2012] Offset between fit and detection position for source 1 = 0.229778 pixels
[Mon May 28 08:48:25 2012] 400.598000 total counts/ 182.320000 bgd. counts: snr = 16.165637
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.229778 pixels
  Position = (318.6, 310.5) = 2 27 32.05 -8 48 13.3
  Extent = 4.6 (4.1-5.2)", rotation angle = 0
  Source counts = 218.3 +/- 20.0
  Background counts = 182.3
  Rate = 0.01 +/- 0.001
[Mon May 28 08:48:25 2012] Vigneting correction estimate = 1.000000
[Mon May 28 08:48:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 08:48:25 2012] Assessing source extent using major axis lower bound
[Mon May 28 08:48:25 2012] Source does appear to be extended
[Mon May 28 08:48:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 09:27:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 28 09:27:26 2012] Initial guess for spatial extent in simple fitting = 4.65"
[Mon May 28 09:27:26 2012] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.914
[Mon May 28 09:27:26 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.65"
[Mon May 28 09:41:49 2012] fullrun_mos2_xmm0502790201_pi300-10000_cl_pass1_src1.ximg exists
[Mon May 28 09:41:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502790201_pi300-10000_cl_pass1_src1.csv
[Mon May 28 09:41:49 2012] fullrun_mos2_xmm0502790201_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon May 28 09:41:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502790201_pi300-10000_cl_pass1_src1.csv
[Mon May 28 09:41:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502790201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502790201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 09:41:49 2012] fullrun_mos2_xmm0502790201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon May 28 09:41:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502790201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon May 28 09:41:49 2012] fullrun_mos2_xmm0502790201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon May 28 09:41:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502790201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon May 28 09:41:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502790201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502790201_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 09:41:59 2012] Warning, spatial fit 1 centroid is now closest to src. 2
[Mon May 28 09:41:59 2012] Vigneting correction estimate = 1.000000
[Mon May 28 09:41:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 09:41:59 2012] Assessing source extent using major axis lower bound
[Mon May 28 09:41:59 2012] Source does appear to be extended
[Mon May 28 09:41:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 10:10:55 2012] XMMSAS src. selection expression = ellipse(27673.504400, 26968.238800, 278.913608, 278.913608, 0.000000, X, Y)
[Mon May 28 10:10:55 2012] Writing source region out to fullrun_mos2_xmm0502790201_pi300-10000_pass1_cl_src1_src.reg
[Mon May 28 10:10:55 2012] Extracting stamp from image fullrun_mos2_xmm0502790201_pi300-10000_cl_sm2.00.img.gz, (303, 295) - (335, 327)
[Mon May 28 10:10:55 2012] XMMSAS bgd. selection expression = annulus(27673.504400, 26968.238800, 464.856013, 929.712027, X, Y)
[Mon May 28 10:10:55 2012] Writing fullrun_mos2_xmm0502790201_pi300-10000_pass1_cl_src1.gif
[Mon May 28 10:10:57 2012] Mean detx,y = (64.18, 83.96) 
[Mon May 28 10:10:58 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 10:11:06 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 10:11:06 2012] Setting source spectrum file to fullrun_mos2_xmm0502790201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 28 10:11:06 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502790201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon May 28 10:24:02 2012] Updating aperture counts using extracted products
[Mon May 28 10:24:02 2012] Error reading totcts from fullrun_mos2_xmm0502790201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 28 10:24:02 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 10:24:02 2012] Using photon index=1.80, rate=0.0123, arf fullrun_mos2_xmm0502790201_pi300-10000_pass1_cl_src1.arf
[Mon May 28 10:24:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 10:24:02 2012] Updating source flux to 1.7e-13
[Mon May 28 10:24:22 2012] Reading fit data from xmm0502790201/analysis//spectral/fullrun_mos2_xmm0502790201_pi300-10000_pass1_cl_src1_pl.csv
[Mon May 28 10:24:22 2012] Spectral fit parameter nH value = 5.75378e+20
[Mon May 28 10:24:22 2012] Spectral fit parameter PhoIndex value = 1.5141
[Mon May 28 10:24:22 2012] Failed to get F(0.3-8.0) from xmm0502790201/analysis//spectral/fullrun_mos2_xmm0502790201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon May 28 10:24:22 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 10:24:22 2012] Using Nh = 5.8e+20, photon index=1.51, rate=0.0123, arf fullrun_mos2_xmm0502790201_pi300-10000_pass1_cl_src1.arf
[Mon May 28 10:24:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 10:24:22 2012] Updating source flux to 2.1e-13