[Fri Feb 17 13:40:25 2012] Detection parameters:
  Position = (291.5, 307.2) = 14 13 43.48 43 38 44.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 232.6 +/- 25.1
  Background counts = 91.2
  Rate = 0.02 +/- 0.002

[Fri Feb 17 13:40:25 2012] Off-axis axis estimate = 0.81'
[Fri Feb 17 13:55:41 2012] Using EEF radius (= 6.84 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 13:55:41 2012] Initial guess for spatial extent in simple fitting = 6.84"
[Fri Feb 17 13:55:41 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.165
[Fri Feb 17 13:55:41 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 6.84"
[Fri Feb 17 14:11:54 2012] fullrun_mos2_xmm0502790101_pi300-10000_cl_pass0_src3.ximg exists
[Fri Feb 17 14:11:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502790101_pi300-10000_cl_pass0_src3.csv
[Fri Feb 17 14:11:54 2012] fullrun_mos2_xmm0502790101_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Feb 17 14:11:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502790101_pi300-10000_cl_pass0_src3.csv
[Fri Feb 17 14:11:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502790101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502790101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 14:11:54 2012] fullrun_mos2_xmm0502790101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Feb 17 14:11:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502790101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Feb 17 14:11:54 2012] fullrun_mos2_xmm0502790101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Feb 17 14:11:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502790101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Feb 17 14:11:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502790101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502790101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 14:11:57 2012] Source 2 is offset by 1.905213 and 6.279488 pixels which is larger than
2 X fitted extent = 3.317835 x 3.317835, not incorporating fit results
[Fri Feb 17 14:11:57 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 14:11:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 14:11:57 2012] Assessing source extent using major
[Fri Feb 17 14:11:57 2012] Source does appear to be extended
[Fri Feb 17 14:11:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 14:45:16 2012] Using EEF radius (= 6.84 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 14:45:16 2012] Initial guess for spatial extent in simple fitting = 6.84"
[Fri Feb 17 14:45:16 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.165
[Fri Feb 17 14:45:16 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 6.84"
[Fri Feb 17 15:05:01 2012] fullrun_mos2_xmm0502790101_pi300-10000_cl_pass1_src3.ximg exists
[Fri Feb 17 15:05:01 2012] fullrun_mos2_xmm0502790101_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Feb 17 15:05:01 2012] Fit fullrun_mos2_xmm0502790101_pi300-10000_cl_pass1_src3 appears to have run properly
[Fri Feb 17 15:05:01 2012] fullrun_mos2_xmm0502790101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Feb 17 15:05:01 2012] fullrun_mos2_xmm0502790101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Feb 17 15:05:01 2012] Fit fullrun_mos2_xmm0502790101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Feb 17 15:05:05 2012] Source 2 is offset by 0.060691 and -7.048142 pixels which is larger than
2 X fitted extent = 6.055081 x 6.055081, not incorporating fit results
[Fri Feb 17 15:05:05 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 15:05:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 15:05:05 2012] Assessing source extent using major
[Fri Feb 17 15:05:05 2012] Source does appear to be extended
[Fri Feb 17 15:05:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 15:41:00 2012] XMMSAS src. selection expression = ellipse(25311.052155, 26681.113647, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Feb 17 15:41:00 2012] Writing source region out to fullrun_mos2_xmm0502790101_pi300-10000_pass1_cl_src2_src.reg
[Fri Feb 17 15:41:00 2012] Extracting stamp from image fullrun_mos2_xmm0502790101_pi300-10000_cl_sm2.00.img.gz, (254, 270) - (329, 345)
[Fri Feb 17 15:41:00 2012] XMMSAS bgd. selection expression = annulus(25311.052155, 26681.113647, 1087.500000, 2175.000000, X, Y) && !ellipse(25194.097600, 27769.024600, 1421.056041, 1421.056041, 0.000000, X, Y) && !ellipse(25943.825287, 26892.703552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25115.477386, 29005.878540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25796.309204, 28592.803772, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24234.185547, 27189.660614, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Feb 17 15:41:00 2012] Writing fullrun_mos2_xmm0502790101_pi300-10000_pass1_cl_src2.gif
[Fri Feb 17 15:46:13 2012] Mean detx,y = (886.46, -623.23) 
[Fri Feb 17 15:46:14 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 17 15:46:22 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 17 15:46:22 2012] Setting source spectrum file to fullrun_mos2_xmm0502790101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Feb 17 15:46:22 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502790101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Feb 17 15:50:48 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Feb 17 15:50:48 2012] rmf not generated due to insufficient counts
[Fri Feb 17 15:51:40 2012] Updating aperture counts using extracted products
[Fri Feb 17 15:51:40 2012] Error reading totcts from fullrun_mos2_xmm0502790101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Feb 17 15:51:40 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 15:51:40 2012] Using photon index=1.80, rate=0.0185, arf fullrun_mos2_xmm0502790101_pi300-10000_pass1_cl_src2.arf
[Fri Feb 17 15:51:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 15:51:40 2012] Updating source flux to 2.1e-13
[Fri Feb 17 15:51:54 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting