[Fri Feb 17 13:40:24 2012] Detection parameters:
  Position = (290.3, 319.1) = 14 13 43.97 43 39 38.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1862.2 +/- 55.4
  Background counts = 91.2
  Rate = 0.1 +/- 0.004

[Fri Feb 17 13:40:25 2012] Off-axis axis estimate = 1.61'
[Fri Feb 17 13:55:41 2012] Using EEF radius (= 7.23 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 13:55:41 2012] Initial guess for spatial extent in simple fitting = 7.23"
[Fri Feb 17 13:55:41 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.855
[Fri Feb 17 13:55:41 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.23"
[Fri Feb 17 14:11:54 2012] fullrun_mos2_xmm0502790101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Feb 17 14:11:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502790101_pi300-10000_cl_pass0_src1.csv
[Fri Feb 17 14:11:54 2012] fullrun_mos2_xmm0502790101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Feb 17 14:11:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502790101_pi300-10000_cl_pass0_src1.csv
[Fri Feb 17 14:11:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502790101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502790101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 14:11:54 2012] fullrun_mos2_xmm0502790101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Feb 17 14:11:54 2012] fullrun_mos2_xmm0502790101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Feb 17 14:11:54 2012] Fit fullrun_mos2_xmm0502790101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Feb 17 14:11:57 2012] Spatial fit model total counts = 3818.370000, observed total counts = 3815.000000
[Fri Feb 17 14:11:57 2012] Offset between fit and detection position for source 1 = 0.579809 pixels
[Fri Feb 17 14:11:57 2012] 3809.710000 total counts/ 1741.240000 bgd. counts: snr = 49.570113
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.579809 pixels
  Position = (290.2, 319.6) = 14 13 44.00 43 39 40.4
  Extent = 14.5 (14.4-28.9)", rotation angle = 0
  Source counts = 2068.5 +/- 61.7
  Background counts = 1741.2
  Rate = 0.2 +/- 0.006
[Fri Feb 17 14:11:57 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 14:11:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 14:11:57 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 14:11:57 2012] Source does appear to be extended
[Fri Feb 17 14:11:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 14:45:16 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 17 14:45:16 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Feb 17 14:45:16 2012] Initial guess for spatial extent in simple fitting = 14.46"
[Fri Feb 17 14:45:16 2012] source mask rpix=3.3, npix_max = 58, mask sum = 56, frac = 0.957
[Fri Feb 17 14:45:16 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.46"
[Fri Feb 17 15:05:01 2012] fullrun_mos2_xmm0502790101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Feb 17 15:05:01 2012] fullrun_mos2_xmm0502790101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Feb 17 15:05:01 2012] Fit fullrun_mos2_xmm0502790101_pi300-10000_cl_pass1_src1 appears to have run properly
[Fri Feb 17 15:05:01 2012] fullrun_mos2_xmm0502790101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Feb 17 15:05:01 2012] fullrun_mos2_xmm0502790101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Feb 17 15:05:01 2012] Fit fullrun_mos2_xmm0502790101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Feb 17 15:05:05 2012] Spatial fit model total counts = 6144.010000, observed total counts = 6144.000000
[Fri Feb 17 15:05:05 2012] Offset between fit and detection position for source 1 = 0.127457 pixels
[Fri Feb 17 15:05:05 2012] 5910.420000 total counts/ 2799.130000 bgd. counts: snr = 58.806991
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.127457 pixels
  Position = (290.1, 319.7) = 14 13 44.02 43 39 40.9
  Extent = 17.8 (17.1-18.8)", rotation angle = 0
  Source counts = 3111.3 +/- 76.9
  Background counts = 2799.1
  Rate = 0.3 +/- 0.008
[Fri Feb 17 15:05:05 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 15:05:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 15:05:05 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 15:05:05 2012] Source does appear to be extended
[Fri Feb 17 15:05:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 15:05:05 2012] Source is confused with source 4
[Fri Feb 17 15:41:00 2012] Counts = 3111.290000, rescaling region sizes by 2.000000
[Fri Feb 17 15:41:00 2012] XMMSAS src. selection expression = ellipse(25194.097600, 27769.024600, 2131.584061, 2131.584061, 0.000000, X, Y)
[Fri Feb 17 15:41:00 2012] Writing source region out to fullrun_mos2_xmm0502790101_pi300-10000_pass1_cl_src1_src.reg
[Fri Feb 17 15:41:00 2012] Extracting stamp from image fullrun_mos2_xmm0502790101_pi300-10000_cl_sm2.00.img.gz, (168, 197) - (413, 442)
[Fri Feb 17 15:41:00 2012] XMMSAS bgd. selection expression = annulus(25194.097600, 27769.024600, 7105.280204, 14210.560409, X, Y) && !ellipse(25943.825287, 26892.703552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25311.052155, 26681.113647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25115.477386, 29005.878540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25796.309204, 28592.803772, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24234.185547, 27189.660614, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Feb 17 15:41:00 2012] Writing fullrun_mos2_xmm0502790101_pi300-10000_pass1_cl_src1.gif
[Fri Feb 17 15:41:06 2012] Mean detx,y = (198.78, 12.25) 
[Fri Feb 17 15:41:08 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 17 15:45:59 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 17 15:45:59 2012] Setting source spectrum file to fullrun_mos2_xmm0502790101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Feb 17 15:45:59 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502790101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Feb 17 15:51:40 2012] Updating aperture counts using extracted products
[Fri Feb 17 15:51:40 2012] Error reading totcts from fullrun_mos2_xmm0502790101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Feb 17 15:51:40 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 15:51:40 2012] Using photon index=1.80, rate=0.31, arf fullrun_mos2_xmm0502790101_pi300-10000_pass1_cl_src1.arf
[Fri Feb 17 15:51:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 15:51:40 2012] Updating source flux to 2.8e-12
[Fri Feb 17 15:51:54 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Fri Feb 17 15:52:08 2012] Reading fit data from xmm0502790101/analysis//spectral/fullrun_mos2_xmm0502790101_pi300-10000_pass1_cl_src1_pl.csv
[Fri Feb 17 15:52:08 2012] Spectral fit parameter nH value = 1.16559e+21
[Fri Feb 17 15:52:08 2012] Spectral fit parameter PhoIndex value = 2.45389
[Fri Feb 17 15:52:08 2012] Failed to get F(0.3-8.0) from xmm0502790101/analysis//spectral/fullrun_mos2_xmm0502790101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Feb 17 15:52:08 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 15:52:08 2012] Using Nh = 1.2e+21, photon index=2.45, rate=0.31, arf fullrun_mos2_xmm0502790101_pi300-10000_pass1_cl_src1.arf
[Fri Feb 17 15:52:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 15:52:08 2012] Updating source flux to 2.3e-12