[Thu Jun 21 23:16:21 2012] Detection parameters:
  Position = (296.7, 337.9) = 14 57 25.18 -1 6 48.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67.2 +/- 11.8
  Background counts = 21.9
  Rate = 0.009 +/- 0.002

[Thu Jun 21 23:16:22 2012] Off-axis axis estimate = 2.86'
[Thu Jun 21 23:17:51 2012] Using EEF radius (= 7.86 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 23:17:51 2012] Initial guess for spatial extent in simple fitting = 7.86"
[Thu Jun 21 23:17:51 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.940
[Thu Jun 21 23:17:51 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.86"
[Thu Jun 21 23:37:33 2012] fullrun_pn_xmm0502780601_pi300-10000_cl_pass0_src5.ximg exists
[Thu Jun 21 23:37:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502780601_pi300-10000_cl_pass0_src5.csv
[Thu Jun 21 23:37:33 2012] fullrun_pn_xmm0502780601_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu Jun 21 23:37:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502780601_pi300-10000_cl_pass0_src5.csv
[Thu Jun 21 23:37:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502780601_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502780601_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 23:37:33 2012] fullrun_pn_xmm0502780601_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu Jun 21 23:37:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502780601_pi300-10000_cl_pass0_tfrozen_src5.csv
[Thu Jun 21 23:37:33 2012] fullrun_pn_xmm0502780601_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Jun 21 23:37:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502780601_pi300-10000_cl_pass0_tfrozen_src5.csv
[Thu Jun 21 23:37:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502780601_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502780601_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 00:13:17 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 15.175098 pixels away
[Fri Jun 22 00:13:17 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 00:13:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 00:13:17 2012] Assessing source extent using major
[Fri Jun 22 00:13:17 2012] Source does appear to be extended
[Fri Jun 22 00:13:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 00:13:28 2012] Using EEF radius (= 7.86 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 00:13:28 2012] Initial guess for spatial extent in simple fitting = 7.86"
[Fri Jun 22 00:13:28 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.940
[Fri Jun 22 00:13:28 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 7.86"
[Fri Jun 22 00:33:13 2012] fullrun_pn_xmm0502780601_pi300-10000_cl_pass1_src5.ximg exists
[Fri Jun 22 00:33:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502780601_pi300-10000_cl_pass1_src5.csv
[Fri Jun 22 00:33:13 2012] fullrun_pn_xmm0502780601_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Jun 22 00:33:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502780601_pi300-10000_cl_pass1_src5.csv
[Fri Jun 22 00:33:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502780601_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502780601_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 00:33:13 2012] fullrun_pn_xmm0502780601_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Jun 22 00:33:13 2012] fullrun_pn_xmm0502780601_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Jun 22 00:33:13 2012] Fit fullrun_pn_xmm0502780601_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Jun 22 01:07:51 2012] Spatial fit model total counts = 250.597000, observed total counts = 233.000000
[Fri Jun 22 01:07:51 2012] Offset between fit and detection position for source 5 = 0.454043 pixels
[Fri Jun 22 01:07:51 2012] 246.404500 total counts/ 212.863000 bgd. counts: snr = 2.298965
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.454043 pixels
  Position = (296.4, 338.2) = 14 57 25.27 -1 6 48.8
  Extent = 4.1 (2.6-6.2)", rotation angle = 0
  Source counts = 33.5 +/- 15.7
  Background counts = 212.9
  Rate = 0.004 +/- 0.002
[Fri Jun 22 01:07:51 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 01:07:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 01:07:51 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 01:07:51 2012] Source does appear to be extended
[Fri Jun 22 01:07:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 01:08:09 2012] XMMSAS src. selection expression = ellipse(25736.532800, 29377.896400, 247.359607, 247.359607, 0.000000, X, Y)
[Fri Jun 22 01:08:09 2012] Writing source region out to fullrun_pn_xmm0502780601_pi300-10000_pass1_cl_src5_src.reg
[Fri Jun 22 01:08:09 2012] Extracting stamp from image fullrun_pn_xmm0502780601_pi300-10000_cl_sm2.00.img.gz, (282, 324) - (311, 352)
[Fri Jun 22 01:08:09 2012] XMMSAS bgd. selection expression = annulus(25736.532800, 29377.896400, 412.266012, 824.532024, X, Y) && !ellipse(26270.816040, 28350.184540, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 22 01:08:09 2012] Writing fullrun_pn_xmm0502780601_pi300-10000_pass1_cl_src5.gif
[Fri Jun 22 01:10:14 2012] Mean detx,y = (-211.95, -1880.41) 
[Fri Jun 22 01:10:16 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 01:10:29 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 01:10:29 2012] Setting source spectrum file to fullrun_pn_xmm0502780601_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Jun 22 01:10:29 2012] Setting bgd. spectrum file to fullrun_pn_xmm0502780601_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri Jun 22 01:19:31 2012] Not generating rmf since there are only 33 counts
[Fri Jun 22 01:19:31 2012] rmf not generated due to insufficient counts
[Fri Jun 22 01:44:50 2012] Updating aperture counts using extracted products
[Fri Jun 22 01:44:50 2012] Error reading totcts from fullrun_pn_xmm0502780601_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Jun 22 01:44:50 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 01:44:50 2012] Using photon index=1.80, rate=0.00367, arf fullrun_pn_xmm0502780601_pi300-10000_pass1_cl_src5.arf
[Fri Jun 22 01:44:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 01:44:50 2012] Updating source flux to 1.5e-14
[Fri Jun 22 01:45:01 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting