[Thu Jun 21 23:16:57 2012] Detection parameters:
  Position = (302.9, 330.1) = 14 57 23.38 -1 7 23.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 116.7 +/- 13.4
  Background counts = 7.7
  Rate = 0.01 +/- 0.001

[Thu Jun 21 23:16:57 2012] Off-axis axis estimate = 2.32'
[Thu Jun 21 23:53:25 2012] Using EEF radius (= 7.59 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 23:53:25 2012] Initial guess for spatial extent in simple fitting = 7.59"
[Thu Jun 21 23:53:25 2012] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.794
[Thu Jun 21 23:53:25 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.59"
[Fri Jun 22 00:13:11 2012] fullrun_mos2_xmm0502780601_pi300-10000_cl_pass0_src3.ximg exists
[Fri Jun 22 00:13:11 2012] fullrun_mos2_xmm0502780601_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Jun 22 00:13:11 2012] Fit fullrun_mos2_xmm0502780601_pi300-10000_cl_pass0_src3 appears to have run properly
[Fri Jun 22 00:13:11 2012] fullrun_mos2_xmm0502780601_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Jun 22 00:13:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502780601_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Jun 22 00:13:11 2012] fullrun_mos2_xmm0502780601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Jun 22 00:13:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502780601_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Jun 22 00:13:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502780601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502780601_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 00:13:21 2012] Spatial fit model total counts = 182.361000, observed total counts = 167.000000
[Fri Jun 22 00:13:21 2012] Offset between fit and detection position for source 5 = 0.235411 pixels
[Fri Jun 22 00:13:21 2012] 186.705000 total counts/ 112.062000 bgd. counts: snr = 7.051149
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.235411 pixels
  Position = (302.6, 330.0) = 14 57 23.45 -1 7 24.4
  Extent = 5.1" x 3.8", rotation angle = 327
  Source counts = 74.6 +/- 13.7
  Background counts = 112.1
  Rate = 0.007 +/- 0.001
[Fri Jun 22 00:13:21 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 00:13:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 00:13:21 2012] Assessing source extent using major
[Fri Jun 22 00:13:21 2012] Source does appear to be extended
[Fri Jun 22 00:13:21 2012] Computing asymmetry using major and minor axis, asym = 1.33
[Fri Jun 22 00:45:46 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 22 00:45:46 2012] Initial guess for spatial extent in simple fitting = 4.47"
[Fri Jun 22 00:45:46 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.965
[Fri Jun 22 00:45:46 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 4.47"
[Fri Jun 22 01:07:46 2012] fullrun_mos2_xmm0502780601_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jun 22 01:07:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502780601_pi300-10000_cl_pass1_src3.csv
[Fri Jun 22 01:07:46 2012] fullrun_mos2_xmm0502780601_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jun 22 01:07:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502780601_pi300-10000_cl_pass1_src3.csv
[Fri Jun 22 01:07:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502780601_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502780601_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 01:07:46 2012] fullrun_mos2_xmm0502780601_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jun 22 01:07:46 2012] fullrun_mos2_xmm0502780601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jun 22 01:07:46 2012] Fit fullrun_mos2_xmm0502780601_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Jun 22 01:07:57 2012] Spatial fit model total counts = 181.149000, observed total counts = 171.000000
[Fri Jun 22 01:07:57 2012] Offset between fit and detection position for source 5 = 0.086032 pixels
[Fri Jun 22 01:07:57 2012] 182.228200 total counts/ 108.594000 bgd. counts: snr = 7.066049
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.086032 pixels
  Position = (302.7, 330.1) = 14 57 23.43 -1 7 24.2
  Extent = 4.4 (3.6-5.3)", rotation angle = 0
  Source counts = 73.6 +/- 13.5
  Background counts = 108.6
  Rate = 0.007 +/- 0.001
[Fri Jun 22 01:07:57 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 01:07:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 01:07:57 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 01:07:57 2012] Source does appear to be extended
[Fri Jun 22 01:07:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 01:39:40 2012] XMMSAS src. selection expression = ellipse(26287.373800, 28669.184400, 264.577208, 264.577208, 0.000000, X, Y)
[Fri Jun 22 01:39:40 2012] Writing source region out to fullrun_mos2_xmm0502780601_pi300-10000_pass1_cl_src5_src.reg
[Fri Jun 22 01:39:40 2012] Extracting stamp from image fullrun_mos2_xmm0502780601_pi300-10000_cl_sm2.00.img.gz, (288, 315) - (318, 345)
[Fri Jun 22 01:39:40 2012] XMMSAS bgd. selection expression = annulus(26287.373800, 28669.184400, 440.962013, 881.924025, X, Y) && !ellipse(26532.700165, 27900.427887, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 22 01:39:40 2012] Writing fullrun_mos2_xmm0502780601_pi300-10000_pass1_cl_src5.gif
[Fri Jun 22 01:40:06 2012] Mean detx,y = (52.55, 903.73) 
[Fri Jun 22 01:40:07 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 01:40:13 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 01:40:13 2012] Setting source spectrum file to fullrun_mos2_xmm0502780601_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Jun 22 01:40:13 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502780601_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri Jun 22 01:43:26 2012] Not generating rmf since there are only 73 counts
[Fri Jun 22 01:43:26 2012] rmf not generated due to insufficient counts
[Fri Jun 22 01:44:51 2012] Updating aperture counts using extracted products
[Fri Jun 22 01:44:51 2012] Error reading totcts from fullrun_mos2_xmm0502780601_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Jun 22 01:44:52 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 01:44:52 2012] Using photon index=1.80, rate=0.00661, arf fullrun_mos2_xmm0502780601_pi300-10000_pass1_cl_src5.arf
[Fri Jun 22 01:44:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 01:44:52 2012] Updating source flux to 7.9e-14
[Fri Jun 22 01:45:00 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Jun 22 01:45:01 2012] xmm0502780601/analysis//spectral/fullrun_mos2_xmm0502780601_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete