[Thu Jun 21 23:16:38 2012] Detection parameters:
  Position = (304.9, 321.4) = 14 57 22.79 -1 8 2.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46.5 +/- 9.2
  Background counts = 8.1
  Rate = 0.004 +/- 0.0008

[Thu Jun 21 23:16:38 2012] Off-axis axis estimate = 1.73'
[Thu Jun 21 23:37:33 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 23:37:33 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Thu Jun 21 23:37:33 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.055
[Thu Jun 21 23:37:33 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 7.29"
[Thu Jun 21 23:53:24 2012] fullrun_mos1_xmm0502780601_pi300-10000_cl_pass0_src8.ximg exists
[Thu Jun 21 23:53:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502780601_pi300-10000_cl_pass0_src8.csv
[Thu Jun 21 23:53:25 2012] fullrun_mos1_xmm0502780601_pi300-10000_cl_pass0_src8_1.ximg exists
[Thu Jun 21 23:53:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502780601_pi300-10000_cl_pass0_src8.csv
[Thu Jun 21 23:53:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502780601_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502780601_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 23:53:25 2012] fullrun_mos1_xmm0502780601_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Thu Jun 21 23:53:25 2012] fullrun_mos1_xmm0502780601_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Thu Jun 21 23:53:25 2012] Fit fullrun_mos1_xmm0502780601_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Fri Jun 22 00:13:19 2012] Source 5 is offset by 2.233781 and -7.274817 pixels which is larger than
2 X fitted extent = 1.636336 x 1.636336, not incorporating fit results
[Fri Jun 22 00:13:19 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 00:13:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 00:13:19 2012] Assessing source extent using major
[Fri Jun 22 00:13:19 2012] Source does appear to be extended
[Fri Jun 22 00:13:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 00:33:13 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 00:33:13 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Fri Jun 22 00:33:13 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.055
[Fri Jun 22 00:33:13 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 7.29"
[Fri Jun 22 00:45:46 2012] fullrun_mos1_xmm0502780601_pi300-10000_cl_pass1_src8.ximg exists
[Fri Jun 22 00:45:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502780601_pi300-10000_cl_pass1_src8.csv
[Fri Jun 22 00:45:46 2012] fullrun_mos1_xmm0502780601_pi300-10000_cl_pass1_src8_1.ximg exists
[Fri Jun 22 00:45:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502780601_pi300-10000_cl_pass1_src8.csv
[Fri Jun 22 00:45:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502780601_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502780601_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 00:45:46 2012] fullrun_mos1_xmm0502780601_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Fri Jun 22 00:45:46 2012] fullrun_mos1_xmm0502780601_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Fri Jun 22 00:45:46 2012] Fit fullrun_mos1_xmm0502780601_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Fri Jun 22 01:07:53 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 150.835874 pixels away
[Fri Jun 22 01:07:53 2012] Spatial fit model total counts = 132.234000, observed total counts = 132.000000
[Fri Jun 22 01:07:53 2012] Offset between fit and detection position for source 5 = 0.353421 pixels
[Fri Jun 22 01:07:53 2012] 135.893400 total counts/ 112.368000 bgd. counts: snr = 2.219298
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.353421 pixels
  Position = (304.8, 321.1) = 14 57 22.82 -1 8 3.3
  Extent = 2.7 (1.9-3.5)", rotation angle = 0
  Source counts = 23.5 +/- 11.7
  Background counts = 112.4
  Rate = 0.002 +/- 0.001
[Fri Jun 22 01:07:53 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 01:07:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 01:07:53 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 01:07:53 2012] Source does appear to be extended
[Fri Jun 22 01:07:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 01:34:25 2012] XMMSAS src. selection expression = ellipse(26469.031000, 27887.026000, 160.534205, 160.534205, 0.000000, X, Y)
[Fri Jun 22 01:34:25 2012] Writing source region out to fullrun_mos1_xmm0502780601_pi300-10000_pass1_cl_src5_src.reg
[Fri Jun 22 01:34:25 2012] Extracting stamp from image fullrun_mos1_xmm0502780601_pi300-10000_cl_sm2.00.img.gz, (296, 312) - (314, 330)
[Fri Jun 22 01:34:25 2012] XMMSAS bgd. selection expression = annulus(26469.031000, 27887.026000, 267.557008, 535.114015, X, Y) && !ellipse(26294.279400, 28667.655800, 341.192810, 341.192810, 0.000000, X, Y)
[Fri Jun 22 01:34:25 2012] Writing fullrun_mos1_xmm0502780601_pi300-10000_pass1_cl_src5.gif
[Fri Jun 22 01:35:28 2012] Mean detx,y = (326.14, -261.71) 
[Fri Jun 22 01:35:29 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 01:35:35 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 01:35:35 2012] Setting source spectrum file to fullrun_mos1_xmm0502780601_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Jun 22 01:35:35 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0502780601_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri Jun 22 01:39:36 2012] Not generating rmf since there are only 23 counts
[Fri Jun 22 01:39:36 2012] rmf not generated due to insufficient counts
[Fri Jun 22 01:44:51 2012] Updating aperture counts using extracted products
[Fri Jun 22 01:44:51 2012] Error reading totcts from fullrun_mos1_xmm0502780601_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Jun 22 01:44:51 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 01:44:51 2012] Using photon index=1.80, rate=0.00211, arf fullrun_mos1_xmm0502780601_pi300-10000_pass1_cl_src5.arf
[Fri Jun 22 01:44:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 01:44:51 2012] Updating source flux to 3.6e-14
[Fri Jun 22 01:44:53 2012] Flag b found in src. 5 procflags, skipping spectral fitting
[Fri Jun 22 01:44:53 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting