[Thu Apr  5 22:13:20 2012] Detection parameters:
  Position = (310.8, 278.7) = 11 42 40.95 60 15 53.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 728.8 +/- 34.6
  Background counts = 62.4
  Rate = 0.03 +/- 0.002

[Thu Apr  5 22:13:20 2012] Off-axis axis estimate = 1.69'
[Thu Apr  5 22:21:44 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Thu Apr  5 22:21:44 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Thu Apr  5 22:21:44 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.848
[Thu Apr  5 22:21:44 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Thu Apr  5 22:26:11 2012] fullrun_mos1_xmm0502780301_pi300-10000_cl_pass0_src1.ximg exists
[Thu Apr  5 22:26:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502780301_pi300-10000_cl_pass0_src1.csv
[Thu Apr  5 22:26:11 2012] fullrun_mos1_xmm0502780301_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Apr  5 22:26:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502780301_pi300-10000_cl_pass0_src1.csv
[Thu Apr  5 22:26:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502780301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502780301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Apr  5 22:26:11 2012] fullrun_mos1_xmm0502780301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Apr  5 22:26:11 2012] fullrun_mos1_xmm0502780301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Apr  5 22:26:11 2012] Fit fullrun_mos1_xmm0502780301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Apr  5 22:37:36 2012] Spatial fit model total counts = 906.884000, observed total counts = 908.000000
[Thu Apr  5 22:37:36 2012] Offset between fit and detection position for source 1 = 0.176010 pixels
[Thu Apr  5 22:37:36 2012] 903.043000 total counts/ 526.939000 bgd. counts: snr = 16.384296
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.176010 pixels
  Position = (310.8, 278.5) = 11 42 40.94 60 15 53.2
  Extent = 5.4 (4.8-6.0)", rotation angle = 0
  Source counts = 376.1 +/- 30.1
  Background counts = 526.9
  Rate = 0.02 +/- 0.002
[Thu Apr  5 22:37:36 2012] Vigneting correction estimate = 1.000000
[Thu Apr  5 22:37:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Apr  5 22:37:36 2012] Assessing source extent using major axis lower bound
[Thu Apr  5 22:37:36 2012] Source does appear to be extended
[Thu Apr  5 22:37:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Apr  5 22:42:55 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Apr  5 22:42:55 2012] Initial guess for spatial extent in simple fitting = 5.40"
[Thu Apr  5 22:42:55 2012] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.989
[Thu Apr  5 22:42:55 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.40"
[Thu Apr  5 22:47:17 2012] fullrun_mos1_xmm0502780301_pi300-10000_cl_pass1_src1.ximg exists
[Thu Apr  5 22:47:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502780301_pi300-10000_cl_pass1_src1.csv
[Thu Apr  5 22:47:17 2012] fullrun_mos1_xmm0502780301_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Apr  5 22:47:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502780301_pi300-10000_cl_pass1_src1.csv
[Thu Apr  5 22:47:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502780301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502780301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Apr  5 22:47:17 2012] fullrun_mos1_xmm0502780301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Apr  5 22:47:17 2012] fullrun_mos1_xmm0502780301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Apr  5 22:47:17 2012] Fit fullrun_mos1_xmm0502780301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Apr  5 22:57:30 2012] Spatial fit model total counts = 915.961000, observed total counts = 915.000000
[Thu Apr  5 22:57:30 2012] Offset between fit and detection position for source 1 = 0.025440 pixels
[Thu Apr  5 22:57:30 2012] 920.163000 total counts/ 549.063000 bgd. counts: snr = 15.837253
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.025440 pixels
  Position = (310.8, 278.5) = 11 42 40.95 60 15 53.2
  Extent = 5.3 (4.8-5.9)", rotation angle = 0
  Source counts = 371.1 +/- 30.3
  Background counts = 549.1
  Rate = 0.02 +/- 0.002
[Thu Apr  5 22:57:30 2012] Vigneting correction estimate = 1.000000
[Thu Apr  5 22:57:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Apr  5 22:57:30 2012] Assessing source extent using major axis lower bound
[Thu Apr  5 22:57:30 2012] Source does appear to be extended
[Thu Apr  5 22:57:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Apr  5 23:05:10 2012] XMMSAS src. selection expression = ellipse(26990.663800, 24181.448400, 317.568009, 317.568009, 0.000000, X, Y)
[Thu Apr  5 23:05:10 2012] Writing source region out to fullrun_mos1_xmm0502780301_pi300-10000_pass1_cl_src1_src.reg
[Thu Apr  5 23:05:10 2012] Extracting stamp from image fullrun_mos1_xmm0502780301_pi300-10000_cl_sm2.00.img.gz, (293, 260) - (329, 297)
[Thu Apr  5 23:05:10 2012] XMMSAS bgd. selection expression = annulus(26990.663800, 24181.448400, 529.280015, 1058.560030, X, Y)
[Thu Apr  5 23:05:10 2012] Writing fullrun_mos1_xmm0502780301_pi300-10000_pass1_cl_src1.gif
[Thu Apr  5 23:05:12 2012] Mean detx,y = (297.52, -252.25) 
[Thu Apr  5 23:05:12 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Apr  5 23:05:17 2012] Binned source spectrum to 10 counts/bin
[Thu Apr  5 23:05:17 2012] Setting source spectrum file to fullrun_mos1_xmm0502780301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Apr  5 23:05:17 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0502780301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Apr  5 23:19:37 2012] Updating aperture counts using extracted products
[Thu Apr  5 23:19:37 2012] Error reading totcts from fullrun_mos1_xmm0502780301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Apr  5 23:19:37 2012] Calculating source flux in energy range 0.30-8.00
[Thu Apr  5 23:19:37 2012] Using photon index=1.80, rate=0.0204, arf fullrun_mos1_xmm0502780301_pi300-10000_pass1_cl_src1.arf
[Thu Apr  5 23:19:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Apr  5 23:19:37 2012] Updating source flux to 2.4e-13
[Thu Apr  5 23:19:42 2012] Reading fit data from xmm0502780301/analysis//spectral/fullrun_mos1_xmm0502780301_pi300-10000_pass1_cl_src1_pl.csv
[Thu Apr  5 23:19:42 2012] Spectral fit parameter nH value = 619162000000.0
[Thu Apr  5 23:19:42 2012] Spectral fit parameter PhoIndex value = 2.23584
[Thu Apr  5 23:19:42 2012] Failed to get F(0.3-8.0) from xmm0502780301/analysis//spectral/fullrun_mos1_xmm0502780301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Apr  5 23:19:42 2012] Calculating source flux in energy range 0.30-8.00
[Thu Apr  5 23:19:42 2012] Using Nh = 6.2e+11, photon index=2.24, rate=0.0204, arf fullrun_mos1_xmm0502780301_pi300-10000_pass1_cl_src1.arf
[Thu Apr  5 23:19:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Apr  5 23:19:42 2012] Updating source flux to 2e-13