[Fri Feb 24 13:49:57 2012] Detection parameters:
  Position = (223.2, 187.2) = 14 20 21.00 46 24 39.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 395.5 +/- 38.5
  Background counts = 456.9
  Rate = 0.03 +/- 0.003

[Fri Feb 24 13:49:57 2012] Off-axis axis estimate = 9.74'
[Fri Feb 24 14:01:44 2012] Using EEF radius (= 11.30 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 14:01:44 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Feb 24 14:01:44 2012] Initial guess for spatial extent in simple fitting = 11.30"
[Fri Feb 24 14:01:44 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.938
[Fri Feb 24 14:01:44 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.30"
[Fri Feb 24 14:21:48 2012] fullrun_pn_xmm0502780101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Feb 24 14:21:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502780101_pi300-10000_cl_pass0_src1.csv
[Fri Feb 24 14:21:48 2012] fullrun_pn_xmm0502780101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Feb 24 14:21:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502780101_pi300-10000_cl_pass0_src1.csv
[Fri Feb 24 14:21:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502780101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502780101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 14:21:48 2012] fullrun_pn_xmm0502780101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Feb 24 14:21:48 2012] fullrun_pn_xmm0502780101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Feb 24 14:21:48 2012] Fit fullrun_pn_xmm0502780101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Feb 24 14:47:04 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 14.867596 pixels away
[Fri Feb 24 14:47:04 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 14:47:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 14:47:04 2012] Assessing source extent using major
[Fri Feb 24 14:47:04 2012] Source does appear to be extended
[Fri Feb 24 14:47:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 14:47:18 2012] Using EEF radius (= 11.30 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 14:47:18 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Feb 24 14:47:18 2012] Initial guess for spatial extent in simple fitting = 11.30"
[Fri Feb 24 14:47:18 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.938
[Fri Feb 24 14:47:18 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 11.30"
[Fri Feb 24 15:10:46 2012] fullrun_pn_xmm0502780101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Feb 24 15:10:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502780101_pi300-10000_cl_pass1_src1.csv
[Fri Feb 24 15:10:46 2012] fullrun_pn_xmm0502780101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Feb 24 15:10:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502780101_pi300-10000_cl_pass1_src1.csv
[Fri Feb 24 15:10:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502780101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502780101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 15:10:46 2012] fullrun_pn_xmm0502780101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Feb 24 15:10:46 2012] fullrun_pn_xmm0502780101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Feb 24 15:10:46 2012] Fit fullrun_pn_xmm0502780101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Feb 24 15:36:46 2012] Spatial fit model total counts = 4875.990000, observed total counts = 4876.000000
[Fri Feb 24 15:36:46 2012] Offset between fit and detection position for source 1 = 0.331511 pixels
[Fri Feb 24 15:36:46 2012] 4887.532000 total counts/ 4713.900000 bgd. counts: snr = 2.528946
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.331511 pixels
  Position = (223.5, 187.3) = 14 20 20.87 46 24 40.1
  Extent = 5.0 (4.1-6.7)", rotation angle = 0
  Source counts = 173.6 +/- 69.9
  Background counts = 4713.9
  Rate = 0.02 +/- 0.01
[Fri Feb 24 15:36:46 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 15:36:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 15:36:46 2012] Assessing source extent using major axis lower bound
[Fri Feb 24 15:36:46 2012] Source does appear to be extended
[Fri Feb 24 15:36:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 15:36:58 2012] XMMSAS src. selection expression = ellipse(19396.661600, 16247.790360, 302.290809, 302.290809, 0.000000, X, Y)
[Fri Feb 24 15:36:58 2012] Writing source region out to fullrun_pn_xmm0502780101_pi300-10000_pass1_cl_src1_src.reg
[Fri Feb 24 15:36:58 2012] Extracting stamp from image fullrun_pn_xmm0502780101_pi300-10000_cl_sm2.00.img.gz, (206, 170) - (241, 205)
[Fri Feb 24 15:36:58 2012] XMMSAS bgd. selection expression = annulus(19396.661600, 16247.790360, 503.818014, 1007.636029, X, Y)
[Fri Feb 24 15:36:58 2012] Writing fullrun_pn_xmm0502780101_pi300-10000_pass1_cl_src1.gif
[Fri Feb 24 15:37:22 2012] Mean detx,y = (-10058.08, 8898.58) 
[Fri Feb 24 15:37:27 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 24 15:37:45 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 24 15:37:46 2012] Setting source spectrum file to fullrun_pn_xmm0502780101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Feb 24 15:37:46 2012] Setting bgd. spectrum file to fullrun_pn_xmm0502780101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Feb 24 17:01:53 2012] Updating aperture counts using extracted products
[Fri Feb 24 17:01:53 2012] Error reading totcts from fullrun_pn_xmm0502780101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Feb 24 17:01:53 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 24 17:01:53 2012] Using photon index=1.80, rate=0.0236, arf fullrun_pn_xmm0502780101_pi300-10000_pass1_cl_src1.arf
[Fri Feb 24 17:01:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 24 17:01:53 2012] Updating source flux to 1.9e-13
[Fri Feb 24 17:04:59 2012] Reading fit data from xmm0502780101/analysis//spectral/fullrun_pn_xmm0502780101_pi300-10000_pass1_cl_src1_pl.csv
[Fri Feb 24 17:04:59 2012] Spectral fit parameter nH value = 1.1248e+21
[Fri Feb 24 17:04:59 2012] Spectral fit parameter PhoIndex value = 2.78299
[Fri Feb 24 17:04:59 2012] Failed to get F(0.3-8.0) from xmm0502780101/analysis//spectral/fullrun_pn_xmm0502780101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Feb 24 17:04:59 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 24 17:04:59 2012] Using Nh = 1.1e+21, photon index=2.78, rate=0.0236, arf fullrun_pn_xmm0502780101_pi300-10000_pass1_cl_src1.arf
[Fri Feb 24 17:04:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 24 17:04:59 2012] Updating source flux to 1.5e-13